Carson FS Reflex Stick II 2.4GHz 6-Channel Radio Control System User Manual

Introduzzjoni

This manual provides detailed instructions for the Carson FS Reflex Stick II 2.4GHz 6-channel radio control system. This high-quality, modern remote control is designed for universal use with various RC vehicles and ships. It features 6 independently controllable channels, making it compatible with TAMIYA MF and DMD units. Please read this manual thoroughly before operating the device to ensure safe and correct usage.

Istruzzjonijiet tas-Sigurtà

• Always operate the radio control system in a safe environment, away from people, animals, and obstacles.
• Ensure all batteries are correctly installed and charged before use. Do not mix old and new batteries.
• Keep the transmitter and receiver dry and away from extreme temperatures.
• Do not modify the radio control system. Unauthorized modifications can lead to malfunction and void the warranty.
• Dejjem ixgħel it-trasmettitur l-ewwel, imbagħad ir-riċevitur. Meta tkun lest, itfi r-riċevitur l-ewwel, imbagħad it-trasmettitur.
• Supervise children when they are operating RC models.

Kontenut tal-Pakkett

Meta tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:

• Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter
• Riċevitur 6-Kanali
• Manwal ta' Istruzzjoni

Note: AA batteries for the transmitter are not included and must be purchased separately.

Prodott Overview

The Carson FS Reflex Stick II transmitter features a robust design with a carbon look. It includes two control sticks for primary functions and additional buttons/switches for auxiliary channels.

Figura 1: Quddiem view of the Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter. This image shows the overall layout of the transmitter, including the two main control sticks, the 2.4GHz antenna, and the various switches and buttons for channel control.

Transmitter Components:

• Control Sticks (Channels 1-4): Used for primary control functions such as steering, throttle, and other proportional movements.
• Auxiliary Buttons/Switches (Channels 5-6): Used for activating additional functions like lights, winches, or other on/off operations. There are two switches, one push-button and one toggle switch.
• Kompartiment tal-batterija: Located at the rear, holds 4 AA batteries.
• Swiċċ tal-Enerġija: To turn the transmitter on/off.
• Binding Button: For pairing the transmitter with the receiver.
• Swiċċijiet tas-Servo Reverse: Allows reversing the direction of servo movement for each channel.

Figura 2: Close-up view of an auxiliary 6-channel switch on the Carson FS Reflex Stick II transmitter. This image highlights one of the toggle switches used for controlling additional functions on your RC model.

Setup

1. Installazzjoni tal-Batterija (Trasmettitur)

1. Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara tat-trasmettitur.
2. Daħħal 4 batteriji AA ġodda, waqt li tiżgura l-polarità korretta (+/-).
3. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

2. Konnessjoni tar-riċevitur

Connect the receiver to your RC model's electronic speed controller (ESC) and servos according to your model's specific instructions. Ensure all connections are firm and correctly oriented.

• Connect the ESC to the receiver's Channel 2 (throttle).
• Connect the steering servo to the receiver's Channel 1 (steering).
• Connect auxiliary servos or devices to Channels 3-6 as needed.

3. L-irbit tat-Trasmettitur u r-Riċevitur

The transmitter and receiver are usually pre-bound from the factory. If re-binding is necessary:

1. Kun żgur li t-trasmettitur ikun MITFI.
2. Connect the bind plug (not included, usually comes with receiver or ESC) to the BIND/VCC port on the receiver.
3. Power on the receiver. The receiver's LED should flash rapidly.
4. Press and hold the BIND button on the transmitter while turning it ON.
5. Release the BIND button after a few seconds. The receiver's LED should now be solid, indicating a successful bind.
6. Turn off the receiver, then the transmitter. Remove the bind plug from the receiver.
7. Restart the system (transmitter ON first, then receiver) to confirm the bind.

Istruzzjonijiet Operattivi

1. Tixgħil / Mitfi

• To power on: Turn on the transmitter first, then power on your RC model (receiver).
• To power off: Power off your RC model (receiver) first, then turn off the transmitter.

2. Basic Control Functions

• Left Stick (Throttle/Elevator): Controls forward/backward movement (throttle) and potentially other vertical movements depending on model type.
• Right Stick (Steering/Aileron): Controls left/right steering (rudder) and potentially other horizontal movements depending on model type.

3. Auxiliary Channel Control

The two additional switches (one push-button, one toggle switch) control channels 5 and 6. These are typically used for non-proportional functions:

• Push-button Switch: Activates a function when pressed, deactivates when released (e.g., horn, momentary light).
• Toggle Switch: Toggles a function between two states (e.g., lights on/off, gear up/down).

4. Servo Reverse

If a servo moves in the opposite direction to your stick input, use the corresponding servo reverse switch on the transmitter to correct its direction. There is a servo reverse switch for each channel.

Manutenzjoni

Tindif

• Wipe the transmitter with a soft, dry cloth.
• Do not use chemical cleaners or solvents, as these can damage the plastic.

Ħażna

• Remove batteries from the transmitter if storing for extended periods to prevent leakage.
• Store the radio control system in a cool, dry place, away from direct sunlight and extreme temperatures.

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: Carson FS Reflex Stick II
• Numru tal-Mudell: 500501007
• Frekwenza: 2.4 GHz
• Kanali: 6
• Vol. Operattiv tat-Trasmettiturtage: 6V (4x AA batteries, not included)
• Bsaten tal-Kontroll: 2 (proportional)
• Kontrolli Awżiljarji: 1 push-button, 1 toggle switch (non-proportional)
• Karatteristiċi: Servo reverse for all channels, compatible with TAMIYA MFC 01/03 and DMD units.
• Dimensjonijiet (L x W x H): 17.5 x 21.5 x 8.4 ċm
• Piż: 660 gramma
• Materjal Prinċipali: Plastik
• Kulur: Karbonju
• Età Rakkomandata: 14 snin 'il fuq

Garanzija u Appoġġ

For warranty information or technical support, please refer to the official Carson webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.