Introduzzjoni
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Ring Alarm 14-Piece Kit. This wireless smart home security system is designed to provide expandable, easy-to-use security with mobile app control and compatibility with Alexa.
The 14-piece kit is ideal for 2-4 bedroom homes and includes a Base Station, two Keypads, eight Contact Sensors, two Motion Detectors, and one Range Extender.
Immaġni: Fuqview of the Ring Alarm 14-Piece Kit components, including the Base Station, Keypads, Contact Sensors, Motion Detectors, and Range Extender.
Kontenut tal-Kit
Your Ring Alarm 14-Piece Kit includes the following components:
- 1 x Stazzjon Bażi
- 2 x Keypads
- 8 x Contact Sensors
- 2 x Motion Detectors
- 1 x Range Extender
Setup u Installazzjoni
The Ring Alarm system is designed for easy do-it-yourself installation. Follow these steps to set up your system:
- Niżżel l-App Ring: Niżżel l-app Ring mill-app store tat-tagħmir mobbli tiegħek (iOS jew Android).
- Oħloq Kont: If you don't have one, create a Ring account and follow the on-screen prompts to set up your home.
- Install the Base Station:
- Place the Base Station in a central location in your home, preferably near your internet router.
- Connect the Base Station to power using the included AC adapter.
- Connect the Base Station to your internet router via Ethernet or Wi-Fi.
- Żid Apparat:
- In the Ring app, tap "Set Up a Device" and select "Security Devices".
- Follow the in-app instructions to add each component: Keypads, Contact Sensors, Motion Detectors, and the Range Extender.
- For Contact Sensors, mount them on doors and windows, ensuring the sensor and magnet are within 1 inch of each other.
- For Motion Detectors, mount them in room corners or on flat walls to cover desired areas.
Image: A person installing a Ring Motion Detector on a wall, demonstrating the ease of do-it-yourself installation.
- Ippersonalizza Settings: Use the Ring app to customize settings for each device, including entry/exit delays, sensor placement, and notification preferences.
Operating Your Ring Alarm System
Your Ring Alarm system offers three security modes: Disarmed, Away, and Home.
- Iddiżarmat: The system is off, and no sensors will trigger the alarm. This mode is typically used when you are home and moving freely.
- Dar: Select sensors are armed (e.g., perimeter doors and windows), while interior motion detectors may be disarmed to allow movement inside. Ideal for when you are home but want protection.
- Bogħod: All sensors are armed, including motion detectors. This mode is used when no one is home.
You can arm and disarm your system using the Keypad or the Ring app.
Image: A Ring Alarm Keypad displayed on a kitchen countertop, showing its compact design and user-friendly interface.
Kontroll tal-App mobbli
The Ring app provides comprehensive control and monitoring capabilities:
- Arm and disarm your system from anywhere.
- Receive real-time mobile notifications when your system is triggered.
- Monitor all your Ring devices.
- View event history.
Image: A hand holding a smartphone displaying the Ring app, showing options for disarming, home, away modes, and live views from connected cameras.
Kompatibilità Alexa
The Ring Alarm system is compatible with Alexa. With a compatible Ring Home Plan (subscription required, sold separately), you can arm and disarm your Ring Alarm using only your voice.
Manutenzjoni
To ensure optimal performance of your Ring Alarm system, consider the following maintenance tips:
- Verifiki tal-Batterija: Regularly check the battery status of your Keypads, Contact Sensors, and Motion Detectors via the Ring app. Replace batteries as needed.
- Contact Sensors: CR2032 coin cell batteries (approx. 3 years life).
- Motion Detectors: 2 AA batteries.
- Base Station: Rechargeable 24-hour battery backup.
- Range Extender: 24-hour battery backup (lithium ion).
- Aġġornamenti tas-Software: Ensure your Ring app and devices are updated to the latest software versions for improved features and security.
- Tindif: Gently wipe down devices with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive materials.
- Konnettività: Periodically check your Wi-Fi connection to ensure the Base Station has a stable internet connection.
Issolvi l-problemi
If you encounter issues with your Ring Alarm system, try the following troubleshooting steps:
- Apparat Offline:
- Check the device's battery level in the Ring app.
- Ensure the device is within range of the Base Station or a Range Extender.
- Restart the device by removing and reinserting its batteries (if applicable).
- Base Station Connectivity Issues:
- Iċċekkja li l-konnessjoni tal-internet tiegħek hija attiva.
- Erġa' ibda r-router u l-modem tiegħek.
- Ensure the Ethernet cable is securely connected (if using wired connection).
- If using Wi-Fi, ensure the Base Station is within good Wi-Fi signal range.
- Allarmi Foloz:
- Review sensor placement to avoid accidental triggers (e.g., motion detectors facing windows, contact sensors on frequently used doors).
- Adjust motion detector sensitivity in the Ring app.
- Ensure all doors and windows with contact sensors are fully closed.
- App Mhux Tirrispondi:
- Close and reopen the Ring app.
- Kun żgur li l-apparat mobbli tiegħek għandu konnessjoni stabbli tal-internet.
- Iċċekkja għal aġġornamenti tal-app fl-app store tat-tagħmir tiegħek.
For further assistance, refer to the official Ring support resources.
Speċifikazzjonijiet
| Komponent | Speċifikazzjoni | Dettalji |
|---|---|---|
| Stazzjon Bażi | Qawwa | 100-240V 50/60Hz AC Adapter Inkluż |
| Ħajja tal-batterija | Rechargeable 24-hour battery backup | |
| Kundizzjonijiet operattivi | -4°F sa 104°F (-20°C sa 40°C) | |
| Dimensjonijiet | 6.65 in x 6.65 in x 1.46 in | |
| Installazzjoni | Mount to walls or place on any flat surface, Ring Alarm Kit required | |
| Konnettività | Ethernet, Wi-Fi, Z-Wave, Bluetooth for setup (plus Cellular Backup with Ring Home Standard subscription). Works with Ring Certified WWR with Kwikset Smart Code Touchpad, Schlage Connect Smart Deadbolt, Yale Real Living Assure, Dome Siren, and First Alert | |
| Tastiera | Qawwa | AC Adapter, rechargeable battery included |
| Security modes | Disarmed, Away, and Home | |
| Kundizzjonijiet operattivi | Użu fuq ġewwa, 32°F sa 104°F (0°C sa 40°C) | |
| Dimensjonijiet | 4.13 in x 4.41 in x 0.75 in | |
| Installazzjoni | Wall mount with Quick-Release Bracket or place it on any flat surface, Ring Alarm Kit required | |
| Konnettività | Z-Wave (firxa ta' 250 pied sal-Istazzjon Bażi fl-arja aperta, linja tal-vista) | |
| Kuntatt Sensor | Qawwa | Batteriji taċ-ċelluli tal-muniti CR2032 |
| Ħajja tal-batterija | Madwar sentejn | |
| Max distance between sensors | 1 inch. Leave ½” space on non-magnet side to access battery compartment | |
| Kundizzjonijiet operattivi | Użu fuq ġewwa, 32°F sa 120°F (0°C sa 49°C) | |
| Dimensjonijiet | 1.56 in x 2.09 in x 0.55 in | |
| Installazzjoni | Immuntar fuq bibien u twieqi, meħtieġ Ring Alarm Kit | |
| Ditekter tal-moviment | Qawwa | 2 batteriji AA |
| Dimensjonijiet | 2.6 in x 2.6 in x 1.53 in | |
| Installazzjoni | Mounts to room corners or flat walls, Ring Alarm Kit required | |
| Medda Estensiva | Qawwa | 100-240V 60Hz |
| Ħajja tal-batterija | 24-hr battery backup (lithium ion) | |
| Kundizzjonijiet operattivi | Indoor use, 32°F t0 104°F (0°C to 40°C) | |
| Dimensjonijiet | 1.86 in x 3.19 in x 1.66 in | |
| Installazzjoni | Plugs into standard power outlets, Ring Alarm Kit required | |
| Konnettività | Z-Wave (250-foot range to Base Station, extends Z-Wave a further 250 feet) |
Garanzija u Appoġġ
Your Ring Alarm Kit includes a 1-year limited warranty and service. Use of the Ring Alarm Kit is subject to terms and conditions.
For more information and support, please visit the official Ring support page:
Software security updates are guaranteed for this device until at least four years after it is last available for purchase as a new unit on Ring websites. For information specific to your device, visit Software Security Updates in the Ring Control Center.
Note: A compatible Ring subscription is required for certain features, including Alarm Professional Monitoring and Cellular Backup. Additional fees may apply for permits or false alarms depending on your local jurisdiction.
