Manwal tal-Istruzzjonijiet tal-Fann Stand Brandson

1. Introduzzjoni

Thank you for choosing the Brandson Stand Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new fan. Please read this manual thoroughly before using the appliance and keep it for future reference.

Istruzzjonijiet Importanti dwar is-Sigurtà

• Always ensure the fan is placed on a stable, flat surface to prevent it from tipping over.
• Daħħalx subgħajk jew xi oġġetti fil-gradilja tal-fann meta jkun qed jaħdem.
• Keep the fan away from water and do not operate it in wet or damp ambjenti.
• Skonnettja l-fann mis-sokit tal-enerġija qabel ma tnaddaf, iċċaqlaq, jew tagħmel xi manutenzjoni.
• Do not use the fan if the power cord or plug is damaged. Contact qualified service personnel for repair.
• Dan l-apparat huwa għall-użu fuq ġewwa biss.

2. Kontenut tal-Pakkett

Carefully unpack all components and check for any damage. If any parts are missing or damaged, please contact Brandson customer support.

• Brandson Stand Fan (main unit, including motor, blades, and grilles)
• Height-adjustable stand pole
• Pjanċa bażi
• Assembly hardware (screws, washers)
• Manwal ta' Istruzzjoni

Figure 1: Unboxed Brandson Stand Fan with its packaging and main components.

3. Assemblaġġ u Setup

Follow these steps to assemble your Brandson Stand Fan:

1. Waħħal il-Bażi: Place the base plate on a flat surface. Insert the bottom end of the stand pole into the designated slot on the base. Secure it using the provided screws and washers from underneath the base.
2. Mount the Fan Head: Carefully place the fan head (motor unit with grilles and blades) onto the top of the stand pole. Ensure it is firmly seated and secure it with the locking screw or knob on the pole.
3. Aġġusta l-Għoli: Loosen the height adjustment knob on the stand pole. Extend or retract the pole to your desired height (between 75 cm and 99 cm). Tighten the knob securely to lock the height in place.
4. Pożizzjonament: Place the assembled fan on a stable, level surface, ensuring there is adequate space around it for air circulation and oscillation.

Figure 2: Illustration of the fan's adjustable height (75-99 cm) and tilt angle.

4. Istruzzjonijiet Operattivi

Your Brandson Stand Fan offers multiple settings for optimal comfort.

Kontrolli

Figure 3: Close-up of the control panel, showing the speed dial and oscillation switch.

• Kontroll tal-Qawwa u l-Veloċità: The fan features a rotary switch, typically located at the back of the motor housing.
  • Position 0: Power Off
  • Position 1: Low Speed
  • Position 2: Medium Speed
  • Position 3: High Speed
  Turn the dial to select your desired fan speed.
• Funzjoni ta 'Oxxillazzjoni: To activate the oscillation (side-to-side sweeping motion), press down the oscillation knob located on top of the motor housing. The fan will oscillate approximately 80 degrees. To stop oscillation, pull the knob up.
• Aġġustament tal-inklinazzjoni: The fan head can be tilted up or down by approximately 30 degrees. Loosen the tilt adjustment knob on the side of the fan head, adjust to the desired angle, and then tighten the knob firmly.
• Aġġustament Għoli: As described in the setup section, the fan's height can be adjusted between 75 cm and 99 cm using the knob on the stand pole.

5. Manutenzjoni u Tindif

Tindif regolari jgħin biex tinżamm il-prestazzjoni tal-fann u testendi l-ħajja tiegħu.

• Dejjem aqla’ l-fann mis-sokit tal-elettriku qabel it-tindif.
• Tindif ta' barra: Imsaħ l-uċuħ ta' barra tal-fann b'ċarruta ratba u damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Gradilja u Xfafar: Dust and debris can accumulate on the grilles and blades, reducing airflow.
  • To clean the grilles, use a vacuum cleaner with a brush attachment or a soft brush to remove dust.
  • For a more thorough cleaning, you may need to remove the front grille. Refer to the assembly instructions in reverse order to safely remove the grille. Clean the blades with a damp drapp. Kun żgur li l-partijiet kollha huma niexfa għalkollox qabel ma terġa’ tgħaqqad u tħaddem il-fann.
• Ħażna: Meta ma tkunx qed tużah għal perjodi twal, aħżen il-fann f'post frisk u niexef, preferibbilment fl-imballaġġ oriġinali tiegħu, biex tipproteġih mit-trab u l-ħsara.

Figura 4: Dettaljat view of the fan blades and protective grille, highlighting areas for cleaning.

6 Issolvi l-problemi

If you experience issues with your fan, please consult the following table before contacting customer support.

7. Speċifikazzjonijiet Tekniċi

8. Garanzija u Appoġġ

Brandson products are manufactured with high quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Brandson websit.

For technical support, spare parts, or any questions not covered in this manual, please contact Brandson customer service. You can find contact information on the Brandson brand store page or through your point of purchase.

Visit the official Brandson Store: Brandson Store on Amazon.de