Introduzzjoni
The SHARP Digital Alarm Clock with AccuSet is designed for effortless timekeeping. Featuring automatic time setting, a clear LED display, and user-friendly controls, this clock is ideal for any bedroom. Its AccuSet technology ensures the time is always accurate, eliminating the need for manual adjustments, making it perfect for seniors, children, or anyone seeking a hassle-free alarm clock solution.
Figura 1: Quddiem view of the SHARP Digital Alarm Clock with green LED display.
Karatteristiċi Ewlenin
- AccuSet Automatic Time Set: The clock is pre-programmed to automatically set the correct time, removing the need for manual adjustments. Simply select your time zone.
- Quick Daylight Savings Time (DST) Adjustment: A convenient switch allows for easy adjustment for Daylight Savings Time (+1 hour) or Standard Time (-1 hour).
- High/Low Dimmer Control: Adjust the brightness of the LED display to your preference, ensuring comfortable viewġurnata jew bil-lejl.
- Backup tal-batterija: A pre-installed CR2032 button cell battery provides backup for time settings during power outages, ensuring continuous accuracy.
- Għażla taż-Żona tal-Ħin: Easily select your local time zone from the options provided at the bottom of the clock.
Figure 2: Diagram illustrating the key features and functionalities of the alarm clock.
Gwida ta' Setup
- Spakkjar: Carefully remove the alarm clock from its packaging.
- Battery Installation (Pre-installed): The CR2032 button cell battery for backup is pre-installed in a screw-secured cabinet at the bottom of the clock. This battery is designed to last for several years. No immediate action is required for initial setup.
- Għażla taż-Żona tal-Ħin: Before plugging in the clock, locate the time zone selection switch at the bottom of the unit. Select your correct time zone (e.g., EST, CST, MST, PST). The default time zone is Eastern Standard Time.
- Konnessjoni tal-Enerġija: Plug the clock into an approved electrical source. The AccuSet feature will automatically program the correct time based on your selected time zone.
- Daylight Savings Time (DST) Adjustment: If applicable, slide the DST switch at the bottom of the clock to "ON" to add one hour (+1 hr) for Daylight Savings Time. For Standard Time, slide the switch to "OFF" to subtract one hour (-1 hr).
Figure 3: Top panel controls for setting time, alarm, and adjusting display.
Istruzzjonijiet Operattivi
L-issettjar tal-allarm
- Agħfas il- ALLARM button once. The alarm time will appear on the display.
- Waqt li jintwera l-ħin tal-allarm, agħfas il- SIEGĦA buttuna biex taġġusta s-siegħa tal-allarm.
- Agħfas il- MINUTA buttuna biex taġġusta l-minuta tal-allarm.
- Biex tattiva jew tiddiżattiva l-allarm, agħfas il-buttuna ALLARM ON / OFF button. An alarm indicator light (usually a small LED) will illuminate when the alarm is active.
- To return to the current time display, press the ĦIN button or wait a few seconds for it to revert automatically.
Bl-użu tal-Funzjoni Snooze
Meta jdoqq l-allarm, agħfas il-buttuna l-kbira SNOOZE button located on the top of the clock. This will temporarily silence the alarm for a set period (typically 9 minutes), allowing for extra rest. The alarm will sound again after the snooze period ends.
Adjusting Display Brightness (Dimmer Control)
The clock features a High/Low dimmer control to adjust the display brightness. Locate the DIMMER HI/LO button on the top panel. Press this button to toggle between high and low brightness settings to suit your environment and preference.
Figure 4: Illustration of the High & Low Display Dimmer Control.
Manutenzjoni
- Tindif: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Sostituzzjoni tal-batterija: The CR2032 backup battery is designed for long-term use. If the clock loses time during a power outage after several years, it may be time to replace the battery. This is located in a screw-secured compartment at the bottom of the clock.
- Pjazzament: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Clock does not display time after plugging in. | Not connected to power, or power outlet is not active. | Kun żgur li l-korda tal-enerġija hija mdaħħla sew f'sokit elettriku li jaħdem. |
| Il-ħin mhux korrett. | Incorrect time zone selected, or DST switch is set incorrectly. | Verify the time zone switch at the bottom of the clock is set to your local zone. Check the DST switch position. |
| L-allarm ma jdoqqx. | L-allarm mhux attivat, jew il-volum tal-allarm huwa baxx wisq (jekk aġġustabbli). | Ensure the alarm is turned ON using the ALARM ON/OFF button. Check for an alarm indicator light. |
| Id-displej huwa qawwi wisq jew mudlam wisq. | Is-setting tad-dimmer jeħtieġ aġġustament. | Press the DIMMER HI/LO button to cycle through brightness settings. |
| Clock loses time during power outage. | Backup battery is depleted. | Replace the CR2032 backup battery located in the compartment at the bottom of the clock. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Sharp |
| Numru tal-Mudell | OZJONG |
| Kulur | Black - Green Led |
| Tip ta 'Wiri | Diġitali |
| Karatteristiċi Speċjali | Alarm, Daylight Saving, Auto Dimmable |
| Dimensjonijiet tal-Prodott | 5.5"W x 2.6"Għ |
| Sors tal-Enerġija | Corded Electric, Battery Powered |
| Batterija tal-Backup | CR2032 (installat minn qabel) |
| Materjal | Plastik |
| Piż tal-oġġett | 9.9 uqija |
| Tip ta 'Immuntar | Mejda |
| UPC | 049353006079 |
Figura 5: Id-dimensjonijiet tal-prodott għal referenza faċli.
Garanzija u Appoġġ
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Sharp websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.
