Manwal tal-Istruzzjonijiet tal-Gamdias Boreas E1-410 RGB CPU Air Cooler

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Boreas E1-410 RGB CPU Air Cooler. Please read this guide thoroughly before proceeding with installation to ensure proper setup and optimal performance.

Figure 1: GAMDIAS Boreas E1-410 RGB CPU Air Cooler

2. Karatteristiċi tal-prodott

The GAMDIAS Boreas E1-410 is designed to provide efficient cooling for your CPU with several key features:

• 4 Copper Heatpipes with Direct Contact Technology: Four heat pipes directly contact the CPU for rapid and efficient heat transfer.
• Optimized Cooling with Universal Thick Base Plate: A robust base plate ensures maximum contact and heat dissipation, compatible with various Intel and AMD platforms.
• Elegant and Stylish Design with ARGB Lighting: High-quality fins and a high-airflow fan integrate addressable RGB lighting for aesthetic customization.
• High Airflow PWM Fan: A 120mm fan with adjustable speeds (800-2000 RPM) delivers up to 70 CFM for effective temperature regulation.
• 5V ARGB Header with Great Compatibility: RGB lighting can synchronize with motherboard software from ASUS, MSI, Gigabyte, and ASRock. Compatible with LGA2066 / 2011-v3 / 2011 / 1700 / 1151 / 1150 / 1155 / 1156 / 1366 / 1200 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 sockets.

Figure 2: Direct Contact Copper Heatpipes

Figure 3: Optimized Thick Base Plate

3. Speċifikazzjonijiet

4. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:

• GAMDIAS Boreas E1-410 CPU Air Cooler (Heatsink with pre-attached fan)
• Universal Mounting Kit (for Intel and AMD sockets)
• Pejst Termali
• Manwal għall-Utent (dan id-dokument)

5. Gwida għall-Installazzjoni

Follow these steps carefully to install your GAMDIAS Boreas E1-410 CPU Air Cooler. Ensure your system is powered off and unplugged before beginning.

5.1. Preparazzjoni

1. Ensure your CPU is correctly installed in its socket on the motherboard.
2. Clean the CPU surface of any old thermal paste using isopropyl alcohol.
3. Apply a small, pea-sized amount of thermal paste to the center of the CPU's integrated heat spreader (IHS).

5.2. Installazzjoni tal-Bracket tal-Immuntar

Refer to the included universal mounting kit for specific instructions for your Intel or AMD motherboard socket. Typically, this involves:

1. Attaching the appropriate backplate to the rear of the motherboard.
2. Securing the standoffs or mounting posts to the front of the motherboard around the CPU socket.

5.3. Heatsink Mounting

1. Carefully place the heatsink onto the CPU, aligning the mounting holes on the heatsink base with the standoffs/mounting posts.
2. Using the provided screws, secure the heatsink to the mounting hardware. Tighten screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.

5.4. Fan Attachment

The 120mm fan is typically pre-attached. If not, or if you need to re-attach it:

1. Ensure the fan is oriented to blow air towards the rear of your PC case for optimal airflow.
2. Use the provided fan clips to secure the fan to the heatsink fins.

5.5. Konnessjonijiet tal-kejbil

1. Connect the 4-pin PWM fan cable from the cooler to the 'CPU_FAN' header on your motherboard.
2. Connect the 3-pin 5V ARGB cable from the cooler to an available '5V ADD_HEADER' or 'ARGB_HEADER' on your motherboard. Do not connect to a 12V RGB header, as this will damage the LEDs.

Figure 4: 5V ARGB Header Connection

6. Istruzzjonijiet Operattivi

6.1. Kontroll tal-Veloċità tal-Fann (PWM)

The 120mm fan supports Pulse Width Modulation (PWM), allowing your motherboard to dynamically adjust fan speed based on CPU temperature. This ensures efficient cooling when needed and quieter operation during lighter loads. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.

6.2. Kontroll tad-Dawl ARGB

The cooler's ARGB lighting can be controlled via your motherboard's 5V ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Install the relevant software for your motherboard to customize lighting effects and colors.

Figure 5: High Airflow PWM Fan in Operation

7. Manutenzjoni

Regular maintenance helps ensure the longevity and performance of your CPU cooler:

• Tneħħija tat-Trab: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is not spinning during cleaning.
• Pejst Termali: If you remove the cooler for any reason, it is recommended to clean off the old thermal paste and apply new thermal paste before re-installation.

8 Issolvi l-problemi

• Il-Fann Mhux Idur: Check if the 4-pin PWM fan cable is securely connected to the 'CPU_FAN' header on the motherboard. Verify fan settings in BIOS/UEFI.
• L-ebda Dawl ARGB: Ensure the 3-pin 5V ARGB cable is correctly connected to a 5V ARGB header (not 12V RGB). Check your motherboard's ARGB software for lighting control.
• Temperaturi Għolja tas-CPU: Confirm that the heatsink is securely mounted and making proper contact with the CPU. Ensure thermal paste was applied correctly. Verify fan orientation for proper airflow (blowing towards the rear/top of the case). Check fan speed settings in BIOS/UEFI.

9. Garanzija u Appoġġ

For warranty information, technical support, or further assistance, please refer to the official GAMDIAS webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.