Manwal tal-Istruzzjonijiet tal-Figura ta' Azzjoni tal-Klassi Voyager tat-Transformers Studio Series 76

1. Introduzzjoni

This instruction manual provides detailed guidance for the Transformers Studio Series 76 Voyager Class Thrust Action Figure. Inspired by the iconic Cybertron Falls scene from the Transformers: Bumblebee movie, this figure offers a complex transformation experience between its robot and tetrajet modes. Designed for collectors and enthusiasts aged 8 and up, this guide will assist you in enjoying your figure to its fullest potential.

Karatteristiċi ewlenin:

• 6.5-inch scale figure with movie-inspired deco.
• Highly articulated for dynamic posing.
• Converts between robot and tetrajet modes in 30 steps.
• Includes blaster and 2 Null Ray accessories.
• Comes with a removable backdrop for scene display.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: PERIKLU TA’ FGATAR - Partijiet żgħar. Mhux għal tfal taħt it-3 snin.

This product contains small parts and may have sharp points. Adult supervision is recommended for younger users. Keep all packaging materials away from children.

3. X'hemm fil-Kaxxa

• 1x Thrust Action Figure
• 1x Aċċessorju tal-Blaster
• 2x Aċċessorji tar-Raġġi Nulli
• 1x Removable Backdrop
• 1x Instruction Booklet (this manual)

4. Twaqqif u Assemblaġġ Inizjali

Your Thrust figure comes pre-assembled in robot mode. Minor assembly involves attaching accessories and setting up the display backdrop.

1. Twaħħil Aċċessorji:
   • Locate the blaster and two Null Ray accessories.
   • The blaster can be held in the figure's hand.
   • The Null Ray accessories can be attached to designated ports on the figure's arms or wings in both robot and tetrajet modes. Refer to the transformation section for optimal placement during each mode.
2. Setting Up the Removable Backdrop:
   • Carefully remove the cardboard backdrop from the packaging.
   • Unfold the backdrop to reveal the Cybertron Falls scene.
   • Position the figure in front of the backdrop to recreate movie scenes.

5. Istruzzjonijiet Operattivi: Trasformazzjoni

The Thrust figure transforms between robot mode and tetrajet mode in 30 steps. This process requires careful manipulation of various parts. Please follow the steps below, applying gentle but firm pressure.

5.1. Robot Mode to Tetrajet Mode (30 Steps)

Ibda bil-figura fil-modalità robot.

1. Remove all accessories (blaster, Null Rays) from the figure.
2. Rotate the robot's head 180 degrees to face backward.
3. Itwi idejn ir-robot fid-dirgħajn.
4. Collapse the chest panel slightly.
5. Dawwar il-qadd 180 grad.
6. Fold the robot's feet upwards.
7. Extend the leg panels and rotate them to align with the lower legs.
8. Bring the two leg sections together, ensuring they lock securely.
9. Rotate the wings on the back of the figure to extend outwards.
10. Fold the shoulder sections inward towards the body.
11. Position the arms alongside the body, tucking them in.
12. Adjust the back panels to form the rear section of the tetrajet.
13. Bring the nosecone section forward from the back of the robot, extending it.
14. Secure the nosecone into place, ensuring it locks with the chest area.
15. Adjust the wing flaps and stabilizers to complete the tetrajet's aerodynamic shape.
16. Attach the Null Ray accessories to the designated ports under the wings for tetrajet mode.
17. Ensure all panels are securely tabbed and aligned to form a cohesive tetrajet.

5.2. Tetrajet Mode to Robot Mode (30 Steps)

To transform back to robot mode, reverse the steps above. Carefully untab and unfold each section.

1. Remove all accessories (Null Rays) from the tetrajet.
2. Untab and detach the nosecone section from the main body.
3. Fold the nosecone section back towards the rear of the jet.
4. Untab and unfold the arm sections from the sides of the jet.
5. Extend the robot's hands from the forearms.
6. Untab and separate the leg sections from each other.
7. Rotate the leg panels back into their robot mode configuration.
8. Dawwar il-qadd 180 grad biex tħares 'il quddiem.
9. Extend the robot's feet.
10. Adjust the chest panel.
11. Rotate the robot's head 180 degrees to face forward.
12. Position the wings and back panels to align with the robot's back.
13. Attach the blaster and Null Ray accessories as desired in robot mode.
14. Ensure all parts are securely tabbed and locked in robot mode.

5.3. Transformation Video Guide

For a visual demonstration of the transformation process, please refer to the official video below:

6. Manutenzjoni u Kura

• Tindif: Use a soft, dry cloth to gently wipe the figure. Avoid harsh chemicals or abrasive cleaners, as these can damage the paint or plastic.
• Ħażna: Aħżen il-figura 'l bogħod mix-xemx diretta u minn temperaturi estremi biex tevita li titlef il-kulur jew titgħawweġ.
• Immaniġġjar: When transforming or posing, apply gentle and even pressure. Avoid forcing parts, as this can lead to breakage.
• Kura tal-Ġogi: If joints become loose, a small amount of clear nail polish or a specialized joint tightener can be applied to the ball joints and allowed to dry to restore tightness.

7 Issolvi l-problemi

• Diffikultà fit-Trasformazzjoni: Refer to the detailed steps in Section 5 and the video guide. Ensure all tabs and slots are correctly aligned before applying pressure. Some transformations require specific sequences.
• Ġonot Laxki: See "Joint Care" in Section 6.
• Accessories Not Staying in Place: Ensure accessories are inserted into the correct ports. Some ports may be tighter than others.
• Figure Not Standing Stably: Adjust the figure's pose and leg positions. The figure is highly articulated, allowing for various stable stances.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For information regarding product warranty, returns, or additional support, please refer to the documentation included with your purchase or visit the official Hasbro website. Contact details for customer service are typically provided on the product packaging or the manufacturer's support pages.

You can also visit the official Transformers Store for more information: Ħanut tat-Trasformaturi fuq Amazon