1. Introduzzjoni
The Silvergear 2-in-1 Pulse Oximeter Model 2238 is a compact and convenient device designed for non-invasive spot-checking of arterial oxygen saturation (SpO2) and pulse rate (PRbpm). It is suitable for use by adults and children in home environments, medical facilities, and during sports activities.
Monitoring blood oxygen levels is crucial for individuals with respiratory conditions such as asthma and COPD, heart conditions, and athletes. A normal blood oxygen saturation typically ranges between 95-100%. Slight variations are normal, but consistent or prolonged low readings should be discussed with a healthcare professional. This device also measures your heart rate.
For athletes training at high altitudes, such as during skiing, mountaineering, or flying, measuring oxygen saturation can be beneficial. In high-altitude environments, it is normal for blood oxygen saturation to be lower than usual. During physical exertion, oxygen levels may decrease slightly. This handy and compact oximeter allows for easy measurement and monitoring.
Quddiem view of the Silvergear Pulse Oximeter displaying SpO2 and PRbpm readings.
2. Informazzjoni dwar is-Sigurtà
- Consult your doctor before using this device for medical diagnosis or treatment.
- This device is intended for non-medical use and self-monitoring. It is not a substitute for professional medical advice.
- Tużax l-ossimetru f'ambjent MRI jew CT.
- Do not use the oximeter in situations requiring continuous monitoring.
- Żomm l-apparat 'il bogħod mit-tfal u l-annimali domestiċi. Partijiet żgħar jistgħu joħolqu periklu ta' fgar.
- Avoid exposing the device to direct sunlight, extreme temperatures, or moisture.
- Tippruvax issewwi jew timmodifika l-apparat int stess. Ikkuntattja l-appoġġ għall-klijenti għall-għajnuna.
3. Setup
3.1 Kontenut tal-Pakkett
- Silvergear 2-in-1 Pulse Oximeter
- Manwal għall-Utent
3.2 Installazzjoni tal-batterija
- Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-apparat.
- Żerżaq l-għatu 'l barra biex tiftaħ il-kompartiment.
- Insert two 1.5V AAA batteries (not included) according to the polarity indicators (+/-) inside the compartment.
- Erġa’ poġġi l-għatu tal-kompartiment tal-batterija sakemm tikklikkja sew f’postu.
Ġenb view of the Silvergear Pulse Oximeter, illustrating its compact design.
4. Istruzzjonijiet Operattivi
4.1 Teħid ta 'Kejl
- Kun żgur li l-apparat għandu batteriji ġodda installati.
- Iftaħ il-clamp of the oximeter by pressing the top and bottom parts together.
- Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring your fingertip is placed against the stop guide.
- Eħles il-clamp, allowing it to gently close around your finger.
- Press the power button on the front of the device to turn it on.
- Keep your hand still and avoid movement during the measurement. The display will show your SpO2 and pulse rate readings within a few seconds.
- The device will automatically shut off after approximately 8 seconds of inactivity.
The Silvergear Pulse Oximeter opened, ready for finger insertion.
A hand demonstrating correct finger placement in the Silvergear Pulse Oximeter for measurement.
4.2 Nifhmu l-Wiri
The clear LED display shows the following information:
- %SpO2: Blood Oxygen Saturation level.
- PRbpm: Rata tal-polz f'taħbitiet kull minuta.
- Plethysmogram: A waveform indicating the pulse strength.
- Indikatur tal-batterija: Juri l-ħajja tal-batterija li fadal.
Close-up of the Silvergear Pulse Oximeter display with labels indicating Oxygen Saturation, Pulse Rate, Plethysmogram, and Power Button.
Ieħor view of the Silvergear Pulse Oximeter in use on a finger, showing the active display.
5. Kura u Manutenzjoni
5.1 Tindif
- Naddaf il-wiċċ tal-ossimetru b'ċarruta ratbaampimħallat ma' alkoħol mediku (70% etanol jew isopropanol).
- Do not immerse the device in water or any other cleaning solution.
- Kun żgur li l-apparat ikun niexef għalkollox qabel ma terġa' tużah.
5.2 Ħażna
- Aħżen l-ossimetru f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Jekk l-apparat ma jkunx se jintuża għal perjodu twil ta' żmien, neħħi l-batteriji biex tevita t-tnixxija u l-ħsara.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No display after pressing power button | Il-batteriji huma mejta jew installati ħażin. | Ibdel il-batteriji jew erġa’ installahom b’mod korrett, waqt li tosserva l-polarità. |
| Qari mhux preċiż jew instabbli | Finger not inserted properly; excessive movement; cold fingers; nail polish or artificial nails. | Re-insert finger correctly; remain still; warm hands; remove nail polish/artificial nails. |
| "Finger Out" jew messaġġ ta' żball simili | Saba’ mhux skopert jew imqiegħed ħażin. | Ensure finger is fully inserted and resting flat on the sensor. |
7. Speċifikazzjonijiet Tekniċi
- Oxygen Saturation Measurement Range: 70-99%
- Preċiżjoni tas-Saturazzjoni tal-Ossiġenu: ± 2% (70-99%), unspecified below 70%
- Medda ta' Kejl tar-Rata tal-Impuls: 30-240 bpm
- Preċiżjoni tar-rata tal-polz: ± 2 bpm or ± 2% (whichever is greater)
- Wiri: LED
- Provvista tal-Enerġija: 2 x 1.5V batteriji AAA (mhux inklużi)
- Vol Operattivtage: 2.6 - 3.6 V
- Kurrent Operattiv: ≤ 30 mA
- Tifi awtomatiku: Madwar 8 sekonda ta' inattività
- Numru tal-Mudell: 2238
- Manifattur: Karsten Internazzjonali
8. Garanzija u Appoġġ
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Silvergear customer service. Keep your proof of purchase for any warranty claims.
You can also visit the official Silvergear store for more information: Ħanut tal-Fiddagear
9. Rimi
This product contains electronic components and batteries. Do not dispose of it with general household waste. Please follow local regulations for the disposal of electronic waste and batteries to protect the environment.
