Manwal tal-Utent tal-Kontrollur tad-Dawl tal-Istrixxa LED Sunity RGB

1. Introduzzjoni

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sunity RGB LED Strip Light Controller. This device offers versatile control over your LED strip lights through a dedicated mobile application, an infrared (IR) remote control, and integrated buttons on the controller box. Key features include 16 million color options, 22 dynamic light modes, and a music synchronization function.

Sunity RGB LED Strip Light Controller with remote and smartphone app interface

Figure 1: Sunity RGB LED Strip Light Controller, IR remote, and mobile application interface.

2. Informazzjoni dwar is-Sigurtà

Ensure the power supply used is compatible with the controller's voltage requirements (5V-24V DC). An incompatible power supply can damage the device.
The power supply is not included with this product. Use a certified power adapter suitable for your LED strip.
Tesponix il-kontrollur għall-ilma jew għal umdità eċċessiva.
Avoid placing the controller in direct sunlight or near heat sources.
Żomm fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

1 x Sunity RGB LED Strip Light Controller (Model: LED-Ctrl-ONE)
1 x IR Remote Control (with 1 Lithium Metal battery included)

Close-up view of the LED strip controller showing its components and labels

Figura 2: Dettaljat view of the LED Strip Controller, highlighting its connection points and control buttons.

4. Istruzzjonijiet ta' Setup

Qabbad l-Istrixxa LED: Connect your 4-pin 10mm RGB LED strip to the controller's output port. Ensure the pins are aligned correctly. The controller is compatible with 5050, 3528, and 2835 RGB LED strips from 1m to 10m in length.
Qabbad il-Provvista tal-Enerġija: Connect a compatible 5V-24V DC power supply (not included) to the controller's input port.
Prepare IR Remote: Remove the clear plastic insulation tab from the battery compartment of the IR remote control before first use.
Install Mobile Application: Download the "LotusLanternX" app from your device's app store. You can scan the QR code below or search directly.
Figure 3: LotusLanternX mobile application interface and download options.

Scan this QR code to download the app: App Niżżel il-Kodiċi QR
Tqabbil Bluetooth: Open the "LotusLanternX" app on your smartphone. The app will automatically search for and connect to the controller via Bluetooth. Ensure Bluetooth is enabled on your device.

Diagram showing connection steps for the LED strip controller, including power and remote preparation

Figure 4: Connection and usage tips for the LED strip controller.

5. Istruzzjonijiet Operattivi

5.1. Mobile Application Control

The "LotusLanternX" app provides comprehensive control over your LED strip lights.

Għażla tal-Kulur: Agħżel minn 16-il miljun kulur billi tuża r-rota tal-kulur jew l-għażliet tal-kulur issettjati minn qabel.
Modi tad-Dawl: Select from 22 dynamic light modes, including various fades, jumps, and flashes.
Modalità ta' Sinkronizzazzjoni tal-Mużika: The built-in sensitive microphone allows the lights to synchronize with music playing in the environment. Alternatively, you can sync with music playing on your phone or via your phone's microphone.
Funzjoni tal-ħin: Schedule automatic on/off times for your LED lights.
Aġġustament tal-Luminożità/Veloċità: Adjust the brightness of static colors or the speed of dynamic modes.

Various features of the LED strip controller including 16 million colors, 22 light modes, app control, remote control, music mode, and timing function

Figura 5: Aktarview of controller features including app and remote control.

5.2. Kontroll mill-bogħod IR

Point the IR remote directly at the controller box's IR receiver for optimal performance.

Mixgħul/Mitfi: Agħfas il- ON or OFF button to power the lights.
Buttuni tal-Kulur: Select from 16 static colors directly.
Buttuni tal-Modalità: Cycle through the 22 light modes.
Speed/Brightness: Adjust the speed of dynamic modes or the brightness of static colors.

5.3. Controller Box Buttons

The physical buttons on the controller box provide basic control.

Buttuna MODE: Cycles through different light modes.
Buttuna tal-VELOĊITÀ: Adjusts the speed of dynamic modes or brightness of static colors.
Buttuna tal-KULUR: Cycles through static colors.

Image illustrating three ways to control the LED strip lights: via smartphone app, IR remote, and the control box buttons

Figure 6: Control options for the LED strip lights.

6. Manutenzjoni

Clean the controller and remote with a dry, soft cloth. Do not use liquid cleaners.
Aħżen l-apparat f'post frisk u niexef meta ma jkunx qed jintuża għal perjodi twal.
Ensure the IR receiver on the controller box is not obstructed for proper remote functionality.

7 Issolvi l-problemi

Id-dwal ma jixegħlux:
- Check if the power supply is properly connected and functioning.
- Ensure the LED strip is correctly connected to the controller with proper pin alignment.
- Verify the controller is powered on via the app, remote, or control box button.
Il-kontroll mill-bogħod ma jaħdimx:
- Ensure the plastic insulation tab has been removed from the remote's battery compartment.
- Point the remote directly at the IR receiver on the controller box.
- Replace the remote battery if necessary.
Incorrect colors displayed (e.g., Red shows Green):
- This issue often occurs if the LED strip's color sequence (e.g., GRB, RGB, BRG) does not match the controller's default setting.
- Use the "LotusLanternX" app to modify the pin sequence. Navigate to the "Modify Pin Sequence" option within the app settings and adjust until colors are correct.
Figure 7: Solution for incorrect color display via app's pin sequence modification.
Problemi bil-konnessjoni Bluetooth:
- Kun żgur li l-Bluetooth huwa attivat fuq l-ismartphone tiegħek.
- Restart the "LotusLanternX" app.
- Power cycle the LED controller (unplug and re-plug the power supply).
- Ensure no other devices are actively connected to the controller via Bluetooth.

8. Speċifikazzjonijiet

Numru tal-Mudell	LED-Ctrl-ONE
Brand	Sunity
Input Voltage	5V-24V DC
Kompatibilità	4-pin 10mm RGB LED Strip Lights (5050, 3528, 2835)
Metodi ta' Kontroll	APP Control (Bluetooth), IR Remote Control, Controller Box Buttons
Għażliet tal-Kulur	16 Million (APP), 16 Static (IR Remote)
Modi tad-Dawl	22
Dimensjonijiet (L x W x H)	6.69 x 3.94 x 0.39 pulzieri
Piż tal-oġġett	2.11 uqija (0.06 Kilogrammi)
Batterija mill-bogħod	1 x Lithium Metal (included)
UPC	782947792926

9. Informazzjoni dwar Garanzija

Specific warranty details for this product are not provided in the available information. Please refer to your purchase receipt or contact the seller/retailer directly for warranty terms and conditions.

10. Appoġġ

For further assistance or technical support, please contact the seller or refer to the support resources provided by the platform where the product was purchased. Please have your model number (LED-Ctrl-ONE) and purchase details ready when seeking support.

	Manwal tal-Utent tal-Kontrollur tal-APP Bluetooth tad-Dawl tal-Istrixxa LED Gwida komprensiva għall-Kontrollur tal-APP Bluetooth tal-Istrixxa tad-Dawl LED, li tkopri l-karatteristiċi, l-installazzjoni, it-tħaddim, l-ispeċifikazzjonijiet, u informazzjoni dwar il-garanzija. Ikkontrolla l-istrixxi LED tiegħek permezz tal-Bluetooth bit-telefon ċellulari tiegħek.
	Strixxa tad-Dawl LED GHome Smart SL1: Gwida għall-Installazzjoni u l-Karatteristiċi Gwida komprensiva għall-istrixxa tad-dawl LED GHome Smart SL1, li tkopri l-partijiet, il-funzjonijiet tal-kontrollur, it-tqabbil tal-apps, il-passi tal-installazzjoni, il-karatteristiċi ewlenin, noti importanti, u twissijiet ta' sigurtà. Kompatibbli ma' Alexa u Google Home.
	Strixxa tad-Dawl LED COB LED RGBW mingħajr Dotless Apollo Solida - Skeda tad-Data u Gwida għall-Installazzjoni Folja tad-dejta komprensiva u gwida għall-installazzjoni għall-Istrixxa tad-Dawl LED Solid Apollo LED RGBW Dotless COB. Din l-istrixxa ta' 16.4 pied (5m), 90W, 24V għandha 4200 LED għal illuminazzjoni uniformi u mingħajr tikek, dijodi bojod dedikati, u tista' titbaxxa kompletament. Tinkludi speċifikazzjonijiet dettaljati, informazzjoni dwar il-prodott, struzzjonijiet ta' installazzjoni pass pass, prekawzjonijiet ta' sigurtà, u dettalji tal-garanzija.
	Manwal tal-Operazzjoni tal-APP Magic Lantern This manual provides instructions for operating the Magic Lantern APP, a mobile application designed to control LED lamp belts via Bluetooth. It covers app features, operating environment, installation, and detailed operational steps for color adjustment, mode selection, music synchronization, microphone input, scheduling, and pin sequence modification.
	Speċifikazzjonijiet tal-Prodott tal-American Lighting Simple Select Series Kontrollur In-line 12V/24V Speċifikazzjonijiet dettaljati, karatteristiċi, informazzjoni dwar l-ordnijiet, u funzjonijiet għall-Kontrollur In-line tas-Serje Simple Select ta' 12V/24V tal-American Lighting, inklużi mudelli ta' kulur wieħed, CCT sintonizzabbli, RGB, RGBW, u RGBTW.
	Strixxa RGB Sharkoon SHARK Blades - Dawl LED RGB Indirizzabbli Explore the Sharkoon SHARK Blades RGB Strip, a 360mm flexible LED strip with 18 addressable 5050 RGB LEDs. It offers easy magnetic or adhesive installation and seamless integration with major motherboard RGB sync technologies like Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte Fusion for customizable PC illumination.

Sunity LED-Ctrl-ONE