1. Introduzzjoni
Thank you for choosing the FLYLINKTECH CF800 Portable Car Jump Starter. This device is designed to provide a reliable solution for jump-starting 12V vehicles, serving as a powerful portable power bank, and offering a multi-functional LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.
Kontenut tal-Pakkett:
- FLYLINKTECH CF800 Portable Car Jump Starter
- Smart Jumper Clamps
- Mikro USB Cable
- Manwal għall-Utent
- EVA Hard Case
2. Informazzjoni dwar is-Sigurtà
Always observe the following safety precautions when using the jump starter to prevent electric shock, explosion, fire, or injury.
- Aqra l-Istruzzjonijiet: Dejjem aqra u ifhem l-istruzzjonijiet kollha qabel ma tħaddem l-apparat.
- Protezzjoni tal-għajnejn: Wear safety glasses and protective clothing when working with batteries.
- Ventilazzjoni: Ensure the area is well-ventilated during jump-starting.
- Mhux Permess li Tpejjep/Jixraq: Do not smoke or allow sparks or flames near the battery or engine.
- Żomm Niexef: Tesponix il-jump starter għax-xita jew għal kundizzjonijiet imxarrbin.
- Tfal: Żomm l-apparat fejn ma jintlaħaqx mit-tfal.
- Polarità Korretta: Qabbad il-jumper clamps to the correct battery terminals (red to positive, black to negative). Reverse polarity can cause damage.
- Evita Short Circuits: Tħallix l-aħmar u iswed clamps li jmissu lil xulxin.
- Temperatura: Do not operate the device in extremely high or low temperatures outside the specified range.
- Damaged Device: Do not use the jump starter if it is damaged, cracked, or leaking.

Image: Visual representation of the CF800's integrated safety protections, including short-circuit, reverse charge, reverse polarity, over-discharge, over-current, over-voltage, and high-temperature protection.
3. Prodott Aktarview
The FLYLINKTECH CF800 is a compact and powerful device designed for emergency vehicle starting and portable power needs.
Karatteristiċi tal-Unità Prinċipali:
- Buttuna tal-Qawwa: Activates the device and LED light.
- Dwal Indikaturi tal-Batterija: Show the remaining battery charge level.
- Port tal-Bidu tal-Qabża: Connects to the smart jumper clamps.
- USB Output Ports (x2): Għall-iċċarġjar ta' apparati elettroniċi.
- Port tad-Dħul tat-Tip C: Għall-iċċarġjar mill-ġdid tal-unità tal-jump starter.
- Flashlight LED: Multi-mode light for illumination, strobe, and SOS.
Smart Jumper Clamps:
The included smart jumper clamps feature built-in protection mechanisms and a digital display for enhanced safety and ease of use.
- Protezzjoni tal-Polarità Reverse: Jipprevjeni l-ħsara jekk ikun hemm clamps huma konnessi ħażin.
- Protezzjoni ta' Kurrent Żejjed: Salvagwardji kontra fluss eċċessiv ta' kurrent.
- Over-Voltage Protezzjoni: Jipproteġi kontra l-volumtagŻidiet.
- Protezzjoni ta' ċirkwit qasir: Tipprevjeni ħsara minn short circuits aċċidentali.
- Wirja Diġitali: Provides real-time feedback on battery voltage and protection status.

Image: The complete FLYLINKTECH CF800 kit, showcasing the jump starter unit, smart jumper clamps, USB charging cable, and the protective EVA hard case.
4. Iċċarġjar tal-Jump Starter
Before first use, fully charge the FLYLINKTECH CF800. It is recommended to recharge the unit at least once every three months to maintain battery health, even when not in use.
Proċedura tal-Iċċarġjar:
- Connect the provided Micro USB cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a 5V/2A or 9V/2A USB wall adapter (not included).
- The battery indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.
A full charge typically takes several hours. Disconnect the charger once the unit is fully charged.

Image: The FLYLINKTECH CF800 unit connected to a power source for charging via its Type-C input, while simultaneously demonstrating its capability to charge external devices like a smartphone and tablet using its USB output ports.
5. Setup for Jump Starting
Before attempting to jump start a vehicle, ensure the jump starter is adequately charged (at least 75% recommended).
- Turn off the vehicle's ignition and all accessories (lights, radio, air conditioning).
- Engage the parking brake and place the vehicle in park (automatic) or neutral (manual).
- Kun żgur li t-terminali tal-batterija tal-vettura huma nodfa u ħielsa mill-korrużjoni.
6. Operating Instructions (Jump Starting)
The FLYLINKTECH CF800 is designed to jump start 12V vehicles with up to 10.0L gasoline engines or 9.0L diesel engines.

Image: The FLYLINKTECH CF800 jump starter unit positioned in a car's engine bay, with its smart clamps correctly connected to a vehicle battery, ready for jump-starting.
Gwida pass pass:
- Qabbad Clamps to Jump Starter: Insert the blue plug of the smart jumper clamps firmly into the jump start port on the CF800 unit. Ensure a secure connection.
- Qabbad Clamps għall-Batterija tal-Karozza:
- Waħħal il- AĦMAR (+) clamp to the vehicle's positive battery terminal.
- Waħħal il- ISWED (-) clamp to the vehicle's negative battery terminal.
Il smart clamps' digital display will show the battery voltage and indicate if the connection is correct. If an error is displayed, check the connections.

Image: Close-up of the smart jumper clamps featuring a digital display that provides real-time feedback on battery status and active safety protections, such as low voltage, reverse polarity, reverse charge, short circuit, over-temperature, and over-voltage.
- Ibda l-Vettura: Ladarba l-clamps are correctly connected and the smart display shows a ready status, start the vehicle's engine.
- Neħħi Clamps: As soon as the engine starts, immediately remove the smart jumper clamps from the car battery, first the black (-) clamp, imbagħad il-marka ħamra (+)amp. Then, disconnect the clamps mill-unità tal-jump starter.
If the vehicle does not start after the first attempt, wait at least 30 seconds before trying again. Do not attempt more than three consecutive jump starts.
7. Funzjonalità tal-Power Bank
The FLYLINKTECH CF800 features a 20000mAh capacity and two USB output ports to charge your electronic devices.
- Output USB1: 5V/3A, 9V/2A (Quick Charge 3.0 compatible)
- Output USB2: 5V/2.4A
To Charge Devices:
- Connect your device's USB charging cable to one of the USB output ports on the CF800.
- The CF800 will automatically begin charging your device.
- Monitor the battery indicator lights on the CF800 to check its remaining charge.
8. LED Light Functions
The built-in LED flashlight offers multiple modes for various situations.

Image: The FLYLINKTECH CF800 jump starter held in hand, demonstrating its powerful LED flashlight in action, with icons illustrating its various modes: standard illumination, SOS signal, warning light, and strobe.
It-tħaddim tad-Dawl LED:
- Ixgħel/Itfi: Press and hold the power button for 3 seconds to turn the LED light on or off.
- Ibdel il-Modi: Once the light is on, short press the power button to cycle through the modes: Steady On (Torch) → Strobe → SOS → Off.
9. Manutenzjoni u Ħażna
Proper maintenance ensures the longevity and readiness of your FLYLINKTECH CF800.
- Iċċarġja mill-ġdid regolarment: Recharge the jump starter at least once every 3 months to prevent deep discharge and prolong battery life.
- Tindif: Imsaħ l-unità b'ċarruta niexfa u ratba. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Ħażna: Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Reżistenza għat-temperatura: The CF800 is designed to operate and be stored within a wide temperature range, typically from -20°C to 50°C.

Image: The FLYLINKTECH CF800 jump starter demonstrating its robust design and ability to withstand extreme temperatures, depicted in both a hot environment at 50°C and a cold environment at -20°C.
10 Issolvi l-problemi
If you encounter issues with your FLYLINKTECH CF800, refer to the following common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-vettura ma tibdax | Jump starter battery low; Incorrect clamp connection; Vehicle battery severely discharged; Engine issues. | Kun żgur li l-jump starter ikun iċċarġjat kompletament. Iċċekkja l-kliewi.amp connections for correct polarity. Wait 30 seconds before reattempting. If still no start, vehicle may have other issues. |
| Smart clamps show error | Reverse polarity; Short circuit; Over-voltage; Low voltage. | Irreferi għall-klampi intelliġentiamp display for the specific error code. Disconnect and reconnect clamps correctly. Ensure battery voltage tinsab f'medda aċċettabbli. |
| L-istarter tal-qabża mhux qed jiċċarġja | Charging cable faulty; Wall adapter insufficient; Charging port damaged. | Try a different USB cable and wall adapter. Ensure the adapter meets the specified output (5V/2A or 9V/2A). |
| L-output tal-USB mhux qed jiċċarġja apparati | Jump starter battery low; Device cable faulty; Device not compatible. | Ensure jump starter has sufficient charge. Try a different USB cable or device. |
If the problem persists after trying these solutions, please contact FLYLINKTECH customer support.
11. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | CF800 |
| L-ogħla Kurrenti | 3000A |
| Kapaċità tal-batterija | 20000mAh |
| Ibda Voltage | 12V |
| Gas Engine Compatibility | Sa 10.0L |
| Diesel Engine Compatibility | Sa 9.0L |
| Output USB1 | 5V/3A, 9V/2A (Quick Charge 3.0) |
| Output USB2 | 5V/2.4A |
| Input tat-Tip-Ċ | 5V/2A, 9V/2A, 5V/3A |
| Dimensjonijiet (L x W x H) | 17.8 x 8.8 x 3.8 ċm |
| Piż | 700 g |
| Temperatura operattiva | -20°C sa 50°C |
12. Garanzija u Appoġġ
FLYLINKTECH provides a worry-free 12-il xahar garanzija for the CF800 Portable Car Jump Starter, along with efficient servizz ta' wara l-bejgħ tul il-ħajja.
If you have any questions, encounter problems during use, or require technical assistance, please contact FLYLINKTECH customer support. Our professional technical team is available to help resolve issues within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH websit.





