MIPRO ACT-5801/ACT-58H Wireless Microphone System User Manual

Introduzzjoni

Thank you for choosing the MIPRO ACT-5801/ACT-58H ISM 5 GHz Wireless Microphone System. This system is designed to provide high-quality, reliable audio transmission for various applications. This manual provides detailed instructions for the setup, operation, and maintenance of your new wireless microphone system. Please read this manual thoroughly before operating the equipment to ensure optimal performance and longevity.

Informazzjoni dwar is-Sigurtà

• Sors tal-Enerġija: Use only the specified power adapter for the receiver. Ensure the voltage jaqbel mal-provvista tal-enerġija lokali.
• Ilma u Umdità: Do not expose the system to rain, moisture, or any liquids. Avoid using near water sources.
• Sħana: Keep the system away from heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) li jipproduċu sħana.
• Ventilazzjoni: Ensure proper ventilation for the receiver. Do not block any ventilation openings.
• Tindif: Naddaf biss b'ċarruta niexfa. Tużax tindif likwidu jew tindif aerosol.
• Servizzi: Irreferi kull servizz lil persunal tas-servizz kwalifikat. Tippruvax tagħmel servizz ta' dan il-prodott int stess.
• Batteriji: Dispose of used batteries according to local regulations. Do not expose batteries to excessive heat.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-oġġetti kollha li ġejjin huma inklużi fil-pakkett tiegħek:

• ACT-5801 Digital Receiver (1 unit)
• ACT-58H Handheld Microphone Transmitter (1 unit)
• Power Adapter for Receiver (1 unit)
• Audio Cable (XLR to 1/4" Jack) (1 unit)
• Manwal għall-Utent (dan id-dokument)

Identifikazzjoni tal-Komponent

ACT-5801 Receiver

The ACT-5801 receiver is a 1/2U single-channel unit. Key components include:

• Panel ta' quddiem: Power button, LCD display, Channel/Frequency selection buttons, Volume control, ACT sync button.
• Panel ta 'wara: DC power input, Antenna connectors (BNC), Balanced XLR audio output, Unbalanced 1/4" audio output.

ACT-58H Handheld Microphone Transmitter

The ACT-58H handheld transmitter features:

• Kap tal-mikrofonu: Integrated condenser capsule.
• Korp: Power switch, Battery compartment, LCD display (for channel/battery status), ACT sync window.

Setup

1. Issettjar tar-Riċevitur

1. Pjazzament: Position the ACT-5801 receiver in a clear, open area, away from potential interference sources (e.g., Wi-Fi routers, other 5 GHz devices).
2. Konnessjoni tal-antenna: Connect the supplied antennas to the BNC connectors on the rear panel of the receiver. Ensure they are securely tightened and positioned vertically for optimal reception.
3. Konnessjoni tal-Enerġija: Connect the power adapter to the DC input on the receiver's rear panel, then plug the adapter into an AC power outlet.
4. Output Awdjo: Connect the receiver's audio output (XLR or 1/4" jack) to the input of your mixer, amplifier, or audio interface using the provided audio cable or a suitable alternative.

2. Transmitter Setup (ACT-58H)

1. Installazzjoni tal-batterija: Unscrew the lower part of the ACT-58H handheld microphone to reveal the battery compartment. Insert two fresh AA batteries, observing the correct polarity (+/-). Replace the cover.
2. Qawwa Mixgħul: Slide the power switch to the "ON" position. The LCD display will illuminate, showing battery status and current channel.

3. Synchronization (ACT Sync)

To establish a wireless connection, the receiver and transmitter must be on the same frequency channel. Use the ACT (Automatic Channel Targeting) sync function for quick setup:

1. Qawwa mixgħul ir-riċevitur: Turn on the ACT-5801 receiver.
2. Agħżel il-Kanal: On the receiver, use the channel selection buttons to choose a desired operating frequency. The receiver will automatically scan for a clear channel.
3. Prepare Transmitter: Turn on the ACT-58H transmitter.
4. Ibda s-Sinkronizzazzjoni: Press and hold the "ACT" button on the receiver. The receiver's display will show "ACT" or a similar indicator.
5. Align IR Windows: Position the IR sync window of the ACT-58H transmitter (usually near the bottom of the display) directly facing the IR sync window on the receiver's front panel (typically next to the ACT button). Keep them within a few centimeters.
6. Ikkonferma s-Sinkronizzazzjoni: The transmitter's display will flash and then show the synchronized channel. The receiver's display will also confirm the successful sync.
7. Awdjo tat-Test: Speak into the microphone and observe the audio level indicators on the receiver and your mixer/amplifier to confirm signal presence.

Operazzjoni

Operazzjoni Bażika

• Power On/Off: Use the dedicated power buttons on both the receiver and transmitter. Always power on the receiver first, then the transmitter. Power off the transmitter first, then the receiver.
• Kontroll tal-Volum: Adjust the output volume of the receiver using the volume knob on its front panel. Fine-tune the overall audio level on your connected mixer or ampaktar ħaj.
• Monitoraġġ: Monitor the receiver's LCD display for signal strength (RF) and audio level (AF) indicators. Ensure stable RF and avoid clipping on AF.
• Teknika tal-Mikrofonu: Hold the handheld microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound quality. Avoid covering the microphone grille with your hand.

Għażla tal-Kanal

If you experience interference, you may need to change the operating channel:

1. On the receiver, press the channel selection buttons to cycle through available frequencies or initiate an auto-scan function (if available).
2. Once a clear channel is selected on the receiver, perform the ACT sync procedure again to match the transmitter to the new frequency.

Manutenzjoni

• Tindif: Use a soft, dry cloth to clean the exterior surfaces of both the receiver and transmitter. Do not use abrasive cleaners or solvents.
• Kura tal-batterija: Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage. Always use high-quality alkaline or rechargeable batteries.
• Ħażna: Store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
• Antenni: Handle antennas carefully. Avoid bending or stressing them excessively.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

MIPRO products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official MIPRO websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

For further assistance, please contact your local MIPRO distributor or authorized service center.