Introduzzjoni
Grazzi tax-xiriasing the MEIKEE 20W LED PIR Motion Sensor Security Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlight. Please read these instructions carefully before use and retain them for future reference.
Istruzzjonijiet Importanti dwar is-Sigurtà
- Dejjem skonnettja l-enerġija qabel l-installazzjoni jew is-servizz.
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jew skont il-kodiċijiet elettriċi lokali.
- Tiżgura l-provvista tal-enerġija voltage matches the product specifications (85-265VAC).
- Tħarisx direttament fis-sors tad-dawl LED meta jkun imdawwal, għax jista' jikkawża ħsara lill-għajnejn.
- Do not modify the product in any way, as this will void the warranty and may pose safety risks.
- Żomm il-materjali tal-ippakkjar 'il bogħod mit-tfal.
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:
- 1x MEIKEE 20W Motion Sensor Floodlight
- 1x Screw Package (Mounting Hardware)
- 1x Manwal tal-Utent (dan id-dokument)
Prodott Overview
The MEIKEE 20W LED PIR Motion Sensor Security Floodlight is designed for outdoor use, featuring a sensitive motion sensor and durable, waterproof construction. It provides warm white illumination for enhanced security and convenience.
Figura 1: Quddiem view of the MEIKEE 20W LED PIR Motion Sensor Security Floodlight, showing the main light panel, integrated motion sensor, and mounting bracket.
Karatteristiċi ewlenin:
- Wattage: 20W LED
- Ħruġ Lumen: 1700lm
- Temperatura tal-Kulur: Abjad sħun
- Sensor tal-Moviment: PIR (Passive Infrared) with 180° detection angle and up to 12m detection distance.
- Klassifikazzjoni li ma jgħaddix ilma minnha: IP66 for floodlight, IP65 for sensor.
- Settings aġġustabbli: Time duration and light sensitivity (LUX).
- Kostruzzjoni Durabbli: Aluminum body, nano-material front cover.
Istruzzjonijiet għall-installazzjoni
Before installation, ensure the power supply is turned off at the main circuit breaker.
- Agħżel Post tal-Immuntar: Select a suitable location for the floodlight, ideally between 9.84ft (3m) and 16.4ft (5m) high for optimal detection range and light coverage. Consider the 120° beam angle and 12m detection distance.
Figura 2: Illustration of optimal mounting height (9.84ft - 16.4ft) and detection range (max 39ft / 12m) for the floodlight, showing a 120° beam angle.
- Immarka l-Punti tat-Tħaffir: Uża l-bracket tal-immuntar bħala mudell biex timmarka l-punti tat-tħaffir fuq il-ħajt jew fuq il-wiċċ tal-immuntar.
- Drill toqob: Drill holes at the marked points and insert appropriate wall plugs (if necessary, depending on the surface).
- Sikura l-Bracket: Waħħal il-bracket tal-immuntar mal-wiċċ billi tuża l-viti pprovduti.
- Qabbad il-Floodlight bil-wajer: Connect the floodlight's cable to your main power supply. The 1.5m cable includes three wires: Live (Brown), Neutral (Blue), and Earth (Yellow/Green). Ensure correct polarity and secure connections.
Figura 3: Wara view of the floodlight, illustrating the adjustable mounting bracket and the power cable connection point.
- Adjust Sensor Angle: The motion sensor can be rotated 360° horizontally and 270° vertically to cover the desired detection area.
Figura 4: Close-up of the motion sensor showing the TIME and LUX adjustment dials protected by a waterproof soft rubber cover, and illustrations of the sensor's 360° horizontal and 270° vertical rotation capabilities.
- Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' daħħal l-enerġija fiċ-ċirkwit.
Operazzjoni
The MEIKEE floodlight features two adjustable settings on the motion sensor: TIME and LUX. These settings are located under a waterproof soft rubber cover on the sensor unit.
Figura 5: Dettaljati view of the TIME and LUX adjustment dials on the motion sensor.
1. TIME Setting:
This dial controls the duration the light stays on after motion is detected and the sensor is triggered. Rotate the dial to select the desired time:
- 10s: Light stays on for approximately 10 seconds.
- 45s: Light stays on for approximately 45 seconds.
- 120s: Light stays on for approximately 120 seconds (2 minutes).
- 600s: Light stays on for approximately 600 seconds (10 minutes).
2. LUX Setting:
This dial determines the ambient light level at which the sensor will activate the floodlight. Rotate the dial to select the desired mode:
- "SUN" (Daylight Mode): The sensor will work continuously, activating the light both during the day and at night when motion is detected.
- "MOON" (Night Mode): The sensor will only activate the light when motion is detected during low light conditions or at night.
Nota: The detection range defaults to a maximum of 12 meters (39 feet).
Manutenzjoni
- Tindif: Periodically clean the floodlight and sensor lens with a soft, damp cloth to ensure optimal performance. Do not use abrasive cleaners or solvents.
- Spezzjoni: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power and have it repaired by a qualified technician.
- L-ebda Partijiet li jistgħu jservu mill-utent: The LED light source and sensor unit are not user-replaceable. Do not attempt to open or repair the unit.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Ebda provvista ta 'enerġija. LUX setting is too low (Moon mode during day). Is-senser huwa mblukkat. Senser difettuż. | Iċċekkja l-konnessjonijiet tal-enerġija u s-circuit breaker. Adjust LUX setting to "SUN" for testing, or wait until night. Neħħi kwalunkwe ostaklu mis-sensor view. Ikkuntattja l-appoġġ tal-klijent. |
| Id-dawl jibqa' mixgħul kontinwament. | Continuous motion in detection area. LUX setting is too high (Sun mode at night). Senser difettuż. | Ensure no constant movement is triggering the sensor. Adjust LUX setting to "MOON" for night-only operation. Ikkuntattja l-appoġġ tal-klijent. |
| Light turns on for too short/long a period. | Incorrect TIME setting. | Adjust the TIME dial to the desired duration (10s/45s/120s/600s). |
| Reduced detection range or sensitivity. | Il-lenti tas-sensor hija maħmuġa. Sensor angle is incorrect. Ambient temperature too high (reduces PIR effectiveness). | Naddaf il-lenti tas-sensorju. Adjust the sensor angle to cover the desired area. This is normal behavior for PIR sensors in very warm conditions. |
Speċifikazzjonijiet
| Numru tal-Mudell | FLB020 |
| Wattage | 20W |
| Voltage | 85-265VAC |
| Fluss Luminuż | 1700lm |
| Kulur Luminuż | Abjad sħun |
| Angolu tar-raġġ | 120° |
| Temperatura tax-Xogħol | -25°C sa 40°C |
| Angolu ta 'Sejbien tas-Sensor | 180° |
| Distanza ta' Sejbien | Sa 12m |
| Waterproof Rating (Floodlight) | IP66 |
| Waterproof Rating (Sensor) | IP65 |
| Tul tal-Cable | 1.5m |
| Materjal | Aluminum (body), Nano-material (front cover) |
| Dimensjonijiet (madwar) | 140mm x 98mm x 60mm (excluding bracket) |
Figura 6: Diagram showing the approximate dimensions of the floodlight: 140mm (5.51in) width, 98mm (3.82in) height, and 60mm (2.4in) depth (excluding the sensor and bracket).
For detailed product information and energy efficiency, please refer to the official EPREL database: Folja ta' Informazzjoni dwar il-Prodott EPREL
Garanzija u Appoġġ
MEIKEE products are designed for durability and performance. For warranty information or technical support, please contact your retailer or visit the official MEIKEE websit. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
