User Manual for Reality Leuchten Blake LED Floor Lamp

1. Introduzzjoni

Thank you for choosing the Reality Leuchten Blake LED Floor Lamp. This minimalist and elegant floor lamp (Model R42111107) is designed to provide optimal lighting conditions with its integrated 4.5 Watt LED. Featuring a matte nickel finish, it seamlessly blends into various interior designs. The lamp is battery-operated, offering portability, and can be conveniently recharged via a USB-C port. Its intuitive 4-step touch control allows you to adjust light intensity and ambiance.

Image 1.1: The Blake LED Floor Lamp in a contemporary living space. This image showcases the lamp's sleek design and how it complements modern decor.

2. Istruzzjonijiet tas-Sigurtà

Please read these safety instructions carefully before using the lamp. Żomm dan il-manwal għal referenza futura.

• Tiżgura l-lamp jitqiegħed fuq wiċċ stabbli u livellat biex jipprevjeni li jinqaleb.
• Tesponix l-lamp to extreme temperatures, direct sunlight, or high humidity.
• Tippruvax tiżżarma jew timmodifika l-lampDan jannulla l-garanzija u jista' jikkawża ħsara jew korriment.
• Use only the provided or recommended USB charger for recharging. Using incompatible chargers may damage the battery or lamp.
• Żomm il-lamp 'il bogħod mill-ilma u likwidi oħra.
• The integrated LED light source is not replaceable. If the LED fails, the entire luminaire must be replaced.
• Naddaf il-lamp b'ċarruta ratba u niexfa biss. Tużax prodotti tat-tindif jew solventi li joborxu.

3. Kontenut tal-Pakkett

Iftaħ il-kaxxa bir-reqqa u kun żgur li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba. Jekk xi oġġetti huma neqsin jew bil-ħsara, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

• Blake LED Floor Lamp (Model R42111107)
• Kejbil tal-Iċċarġjar USB (Tip Ċ)
• Manwal għall-Utent (dan id-dokument)

4. Setup u Assemblea

The Blake LED Floor Lamp comes largely pre-assembled. Follow these simple steps to set up your lamp:

1. Neħħi bir-reqqa l-materjali tal-ippakkjar kollha mill-lamp.
2. Poġġi l-lamp base on a flat, stable surface.
3. Tiżgura l-lamp head is securely attached to the pole. The lamp head can be adjusted to direct light as needed.
4. Before first use, it is recommended to fully charge the lamp's integrated battery. Refer to Section 6 for charging instructions.

Image 4.1: The Blake LED Floor Lamp, showing its full height and design. The lamp is ready for placement after unboxing.

5. Istruzzjonijiet Operattivi

The Blake LED Floor Lamp features an intuitive touch control located on the top of the lamp head. This allows for easy power control and brightness adjustment.

Image 5.1: Detail of the touch-sensitive area on the top of the lamp head, used for controlling power and brightness.

1. Power On/Off: Lightly touch the control area once to turn the lamp ON. Touch it again to turn the lamp OFF.
2. Aġġusta l-Luminożità (Dimming): Il-lamp offers 3 levels of brightness. After turning the lamp ON, repeatedly touch the control area to cycle through the brightness levels (Low → Medium → High → Off).
3. L-aġġustament ta' Lamp Kap: Il-lamp head is adjustable, allowing you to direct the light beam as desired. Gently pivot the lamp head to the desired angle.

Image 5.2: The adjustable joint connecting the lamp head to the main pole, enabling flexible light direction.

6. Iċċarġjar tal-batterija

The Blake LED Floor Lamp is equipped with an integrated rechargeable battery, providing approximately three hours of light at maximum brightness on a full charge. The USB-C charging port is located on the lampbażi ta'.

Image 6.1: The USB-C charging port located on the side of the lampbażi ta'.

1. Locate the USB-C port on the side of the lampbażi ta'.
2. Connect the provided USB charging cable to the lamp's USB-C port.
3. Connect the other end of the USB cable to a compatible USB power adapter (e.g., a phone charger, computer USB port, or power bank).
4. A small indicator light near the USB port will illuminate during charging. It will change color or turn off when charging is complete.
5. Għall-aħjar ħajja tal-batterija, evita li tbattal kompletament il-batterija qabel ma terġa 'tiċċarġja.

Nota: Some users have reported that charging works best with the original or a specific type of charger. If you experience issues, try different compatible USB power adapters.

7. Manutenzjoni

To ensure the longevity and optimal performance of your Blake LED Floor Lamp, segwi dawn il-linji gwida sempliċi ta' manutenzjoni:

• Tindif: Trab l-lamp regularly with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water and wipe gently, then dry immediately. Do not use abrasive cleaners, solvents, or chemical sprays.
• Ħażna: Jekk taħżen lamp for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Recharge the battery every few months to prevent deep discharge.
• Kura tal-LED: The integrated LED is designed for long life and does not require replacement. Avoid touching the LED directly.

8 Issolvi l-problemi

If you encounter any issues with your Blake LED Floor Lamp, please refer to the following troubleshooting guide:

9. Speċifikazzjonijiet

Image 9.1: Technical drawing illustrating the dimensions of the Blake LED Floor Lamp (R42111107).

Image 9.2: Energy efficiency label for the Blake LED Floor Lamp, indicating its energy class.

10. Garanzija u Appoġġ

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the retailer.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact RL LIVE YOUR LIGHT customer service through their official webis-sit jew il-bejjiegħ bl-imnut minn fejn xtrajt il-prodott.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.