Yaheetech Dance Pole YT-00099996 Instruction Manual

Introduzzjoni

This instruction manual provides comprehensive guidance for the safe and effective setup, operation, and maintenance of your Yaheetech Dance Pole, model YT-00099996. Please read this manual thoroughly before installation and use to ensure proper functionality and user safety. Retain this manual for future reference.

Informazzjoni dwar is-Sigurtà

WARNING: Failure to follow these safety instructions may result in serious injury or damage to property.

• Ensure the dance pole is installed on a solid, level floor and a sturdy, flat ceiling. Avoid installation on suspended ceilings, false ceilings, or uneven surfaces.
• Verify that the pole is securely tightened and stable before each use. Perform a pull test to confirm stability.
• The maximum weight capacity for this pole is 230 kg (500 lb). Do not exceed this limit.
• Always use the provided silicone rubber rings on the top and base domes to protect your ceiling and floor and enhance stability.
• Regularly inspect all components for wear, damage, or loose connections. Discontinue use immediately if any damage is observed.
• Children and pets should be kept away from the dance pole during use and installation.
• If you are new to pole dancing, consider seeking professional instruction to learn proper techniques and minimize injury risk.

Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, jekk jogħġbok ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti u mhux imħassra. Jekk xi partijiet huma nieqsa jew imħassra, ikkuntattja l-appoġġ għall-klijenti.

Image: All components included in the Yaheetech Dance Pole package, including main poles, extensions, domes, and tools.

• Main Pole A (41.6")
• Main Pole B (40.6")
• Extension A (12")
• Extension B (7.6")
• Sheering Shaft (3")
• Top Dome (15.2" diameter)
• Base Dome (4.7" diameter)
• Assembly Kit (Allen wrench, screws)
• Manwal ta' Istruzzjoni

Image: Detailed diagram illustrating each part of the dance pole with its corresponding length or diameter, and a guide for suitable ceiling heights.

Speċifikazzjonijiet

Image: Visual representation of the pole's dimensions and key specifications.

Setup u Installazzjoni

Follow these steps carefully to ensure a secure and stable installation of your dance pole.

1. Measure Ceiling Height

Accurately measure the height from your floor to the ceiling at the desired installation location. This will determine which pole extensions you need to use.

Image: Guide for selecting appropriate pole extensions based on ceiling height, ranging from 7.1ft to 9.0ft.

Nota: The table above provides common configurations. Always ensure the pole is securely tension-mounted between the floor and ceiling.

2. Passi tal-Assemblea

1. Attach the appropriate extension poles (Extension A, Extension B, Sheering Shaft) to Main Pole B, then connect Main Pole A, based on your ceiling height measurement. Ensure all connections are tightly screwed together.
2. Place the Base Dome on the floor at your desired location. Ensure the silicone ring is properly seated.
3. Carefully lift the assembled pole section and place its bottom end onto the Base Dome.
4. Position the Top Dome onto the top end of the pole, ensuring the silicone ring faces the ceiling.
5. With the pole in place, rotate the bottom section of the pole (above the Base Dome) clockwise to extend the pole and create tension between the floor and ceiling. This is the height adjustment mechanism.
6. Once the pole is snug, use the provided Allen wrench to tighten the three screws located near the bottom of the pole. This locks the height adjustment in place and prevents accidental rotation.
7. Perform a stability check: Gently pull and push the pole in various directions to ensure it is firmly secured and does not wobble or slip. If there is any movement, re-tighten the pole and screws.

Image: Close-up of the adjustable base design, highlighting how the pole extends for tension mounting and the location of the locking screws.

Image: Illustration of the height adjustment process, including unscrewing and re-tightening the locking screws for secure installation.

Istruzzjonijiet Operattivi

Your Yaheetech Dance Pole offers both static and spinning modes for versatile use.

Switching Between Static and Spinning Modes

The mode can be changed by adjusting a screw at the base of the pole.

1. Locate the screw at the very bottom of the pole, near the Base Dome.
2. Biex tidħol Mod statiku (pole does not rotate): Use the provided tool to tighten the screw. This locks the pole in a stationary position, suitable for practicing new moves or for users who prefer a non-rotating pole.
3. Biex tidħol Spinning Mode (pole rotates freely): Use the provided tool to loosen the screw. This allows the pole to rotate, adding dynamic movement to your routines.
4. Always ensure the screw is fully tightened for static mode or sufficiently loosened for spinning mode before use.

Image: Visual guide demonstrating how to switch between static and spinning modes by adjusting the base screw.

Manutenzjoni

• Tindif: Clean the pole regularly with a soft, damp cloth and mild soap or a specialized pole cleaning solution. Avoid abrasive cleaners or materials that could scratch the chrome finish.
• Spezzjoni: Periodically check all connections, screws, and pole sections for tightness and signs of wear or damage. Ensure the silicone rings on the domes are intact and properly positioned.
• Ħażna: If disassembling for storage, clean all parts thoroughly and store them in a dry, safe place to prevent corrosion or damage.

Issolvi l-problemi

Garanzija u Appoġġ

For warranty information, technical support, or to inquire about replacement parts, please contact Yaheetech customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Manifattur: Yaheetech

Numru tal-Mudell: YT-00099996