Manwal tal-Istruzzjonijiet għall-Immuntar tal-Ħajt tat-TV USX Mount Full Motion

Introduzzjoni

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your USX MOUNT Full Motion TV Wall Mount, Model XML019. Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent potential damage or injury. Keep this manual for future reference.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact USX MOUNT customer service or a qualified installer.

Do not install on drywall alone. This mount is designed for installation on wood studs, solid concrete walls, or brick walls.
Ensure the wall structure can safely support the combined weight of the mount and the television. The maximum weight capacity for this mount is 132 lbs (60 kg).
Verify your TV's VESA pattern (mounting hole pattern) is compatible with the mount. This mount supports VESA patterns from 200x100mm to 600x400mm.
Always use the provided hardware. If your installation requires different hardware (e.g., concrete anchors), ensure they are appropriate for your wall type and TV.
Do not overtighten screws. Overtightening can cause damage to the mount or your TV.
Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
Dan il-prodott huwa maħsub għall-użu fuq ġewwa biss.

Kontenut tal-Pakkett

Before installation, please verify that all components are present and undamaged. If any parts are missing or defective, contact USX MOUNT customer service.

Assemblea tal-Pjanċa tal-Ħajt
Parentesi tat-TV (2)
Kit tal-Ħardwer tal-Immuntar (diversi viti, woxers, spacers, ankri)
Livell tal-bużżieqa
Mudell tal-Immuntar
Rabtiet tal-Kejbil (Velcro)

USX MOUNT Full Motion TV Wall Mount components including the main mount assembly, a bubble level, and cable ties.

Figura 1: Aktarview of the USX MOUNT Full Motion TV Wall Mount and included accessories.

Setup u Installazzjoni

1. Check Wall Type Compatibility

This mount is compatible with 16-inch wood studs, solid concrete walls, and brick walls. Tinstallax fuq drywall waħdu.

Diagram showing compatible wall types: wood studs (max 16 inches), solid concrete wall, and brick wall. A warning indicates not to install on drywall alone.

Figure 2: Wall type compatibility for the TV mount. Ensure your wall meets these requirements.

2. Verify TV Compatibility (Size and VESA)

This mount is designed for TVs ranging from 42 to 85 inches and supports a maximum load of 132 lbs. Check your TV's VESA mounting pattern, which refers to the four holes on the back of your TV. The mount supports VESA patterns from a minimum of 200x100mm to a maximum of 600x400mm.

Diagram illustrating TV size compatibility (42-85 inches), VESA compatibility (Min 200x100mm, Max 600x400mm), and maximum load capacity (132 lbs).

Figure 3: TV size, VESA pattern, and weight capacity compatibility details.

3. Attach TV Brackets to TV

Carefully place your TV face down on a soft, clean surface. Attach the two TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are securely fastened and evenly aligned.

Dettaljati view of the TV mount showing its dimensions, safety locks, tilting adjustment mechanism, heavy-duty steel wall plate, and ultra-strong six-arms structure.

Figure 4: Key features and dimensions of the TV mount, including the wall plate and articulating arms.

4. Immunta l-Pjanċa tal-Ħajt mal-Ħajt

Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable. Mark the drill holes using the provided mounting template. Drill pilot holes according to the instructions. Secure the wall plate assembly to the wall using the appropriate lag bolts and washers. Ensure the wall plate is level using the included bubble level.

Important Note for 16" Wood Studs: If your installation is on 16-inch wood studs, screw the bolts into the outermost edge of the holes on both side wall plates of the bracket. This ensures proper compatibility and secure attachment to the studs.

Illustration showing installation tips for 16-inch wood studs, emphasizing screwing bolts into the outermost holes of the wall plate for proper alignment.

Figure 5: Specific installation guidance for 16-inch wood studs.

5. Hang TV onto Wall Plate

With assistance, carefully lift the TV (with brackets attached) and hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount. Engage any safety locks or mechanisms to prevent accidental dislodging.

Image highlighting the superior load capacity of the mount, stating it is UL Tested for Safety and 30% thicker, capable of holding up to 132 lbs.

Figure 6: The mount's robust construction ensures superior load capacity and safety.

Istruzzjonijiet Operattivi

L-aġġustament ViewIng Angolu

The USX MOUNT XML019 offers full motion capabilities for optimal viewing minn pożizzjonijiet varji.

Aġġustament tal-inklinazzjoni: The mount allows for a tilt range of +5° to -15°. This feature helps reduce glare from lights or windows. To adjust, loosen the tilting bolt, set the desired angle, and then tighten the bolt securely.
Aġġustament tad-dawran: The mount can swivel up to ±45° left or right, depending on your TV size and wall clearance. Gently push or pull the TV to achieve the desired swivel angle.
Aġġustament tal-Livell: After installation, you can make a ±4° post-installation level adjustment to ensure your TV is perfectly horizontal.
Estensjoni u Irtirar: The articulating arms allow the TV to extend up to 16.61 inches from the wall or retract back to a slim 2.52 inches, saving space when not in use.

Diagram showing the TV mount's ability to tilt from +5 to -15 degrees and extend up to 16.61 inches or retract to 2.52 inches from the wall, demonstrating space-saving and glare reduction.

Figure 7: Tilt and extension/retraction capabilities for optimal viewing and space saving.

Image demonstrating the TV mount's swivel capability of up to ±45 degrees, allowing for flexible viewing angles in a room.

Figure 8: Flexible viewing angles with ±45° swivel.

Ġestjoni tal-Cable

Use the provided Velcro cable ties to neatly manage and conceal TV cables along the mount arms. This helps maintain a clean and organized appearance.

Manutenzjoni

To ensure the longevity and proper function of your TV wall mount, follow these maintenance guidelines:

Tindif: Neħħi t-trab mill-muntatura regolarment b'ċarruta ratba u niexfa. Għal marki iebsa, uża ċarruta kemxejn ratba.amp drapp u deterġent ħafif, imbagħad imsaħ niexef immedjatament. Evita prodotti tat-tindif jew solventi li joborxu.
Spezzjoni Perjodika: Periodically check all screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
Lubrikazzjoni: The articulating joints are designed for smooth movement. If you notice any stiffness, a small amount of silicone-based lubricant can be applied to the pivot points.
Limitu tal-Piż: Qatt m'għandek taqbeż il-kapaċità massima tal-piż ta' 132 lbs (60 kg).

Issolvi l-problemi

If you encounter any issues with your USX MOUNT TV wall mount, refer to the following common problems and solutions:

Problema	Kawża Possibbli	Soluzzjoni
It-TV mhux livellat wara l-installazzjoni.	Minor misalignment during installation.	Use the ±4° post-installation level adjustment feature. Loosen the leveling screws, adjust the TV, and retighten.
Il-muntatura tħossha maħlula jew imċaqalqa.	Wall plate not securely fastened or screws are loose.	Re-check all wall mounting bolts and TV bracket screws. Ensure they are tightened securely. Verify wall type compatibility.
Difficulty adjusting tilt or swivel.	Joints are stiff or screws are too tight.	Loosen the relevant adjustment screws slightly. Apply a small amount of silicone-based lubricant to the joints if needed.
It-TV ma joqgħodx mal-muntatura.	Mudell VESA jew daqs/piż tat-TV mhux korrett.	Verify your TV's VESA pattern and weight against the mount's specifications (200x100mm to 600x400mm VESA, max 132 lbs). Contact customer service if unsure.

If the problem persists after attempting these solutions, please contact USX MOUNT customer service for further assistance.

Speċifikazzjonijiet

Mudell: XML019
Ditta: MUNTATURA USX
Materjal: Azzar Liga
Kulur: Iswed
Kompatibbiltà tad-Daqs tat-TV: 42 - 85 pulzieri
Kompatibbiltà VESA: 200x100mm sa 600x400mm
Kapaċità tal-piż: Sa 132 lbs (60 kg)
Angolu ta 'l-inklinazzjoni: +5° sa -15°
Angolu tad-dawran: Up to ±45° (depends on TV size)
Aġġustament tal-Livell: ±4° wara l-installazzjoni
Estensjoni mill-Ħajt: 2.52 pulzieri (irtirat) sa 16.61 pulzieri (estiż)
Kompatibilità tat-Tip ta' Ħajt: 16" Wood Studs, Solid Concrete, Brick (Do not install on drywall alone)
Elenkat UL: Iva
Piż tal-oġġett: 12.47 liri
Dimensjonijiet tal-Prodott: 16.93 x 2.76 x 11.81 pulzieri

Garanzija u Appoġġ

USX MOUNT provides after-sales service for this product. For warranty information, technical support, or any questions regarding your TV mount, please contact USX MOUNT customer service. You can typically find contact details on the product packaging or the official USX MOUNT website. When contacting support, please have your model number (XML019) and purchase information ready.

US-based Customer Service: Buy with confidence, we provide after-sales service. Not sure this mount will work?? Our engineers will simulate the installation for you. Please let us know the Complete TV models.

	Manwal tal-Installazzjoni tal-Muntatura tal-Ħajt tat-TV USX-MOUNT XML030-K Manwal ta' struzzjonijiet dettaljat għall-muntatura tal-ħajt tat-TV USX-MOUNT XML030-K, adattat għal televiżjonijiet ta' 42-82 pulzier. Jipprovdi gwida komprensiva dwar kontrolli ta' kompatibilità, identifikazzjoni tal-partijiet, installazzjoni pass pass għal ħitan tal-injam u tal-konkrit, ittestjar tal-integrità, u aġġustamenti tal-angolu/livell. Jinkludi twissijiet ta' sigurtà u rekwiżiti tal-għodda.
	Manwal tal-Istruzzjonijiet għall-Immuntar mal-Ħajt tat-TV USX-MOUNT XMM021 Manwal ta' struzzjonijiet komprensiv għall-muntatura tal-ħajt tat-TV USX-MOUNT XMM021, iddisinjata għal televiżjonijiet ta' 32-65 pulzier. Jinkludi passi ta' installazzjoni għal travi tal-injam u ħitan tal-konkrit, kontrolli tal-kompatibilità, u gwidi ta' aġġustament.
	Manwal tal-Istruzzjonijiet USX-MOUNT XML006-24K-1 għal TV ta' 42-85" Manwal ta' struzzjonijiet għall-muntatura tal-ħajt tat-TV full-motion USX-MOUNT XML006-24K-1, iddisinjata għal televiżjonijiet ta' 42-85 pulzier. Jipprovdi passi dettaljati għall-installazzjoni fuq travi tal-injam jew ħitan tal-konkrit solidu, inklużi listi tal-partijiet, dimensjonijiet, u proċeduri ta' aġġustament.
	Manwal tal-Istruzzjonijiet għall-Immuntar mal-Ħajt tat-TV Fiss USX-MOUNT XFM090-15/WFM009-01 Manwal ta' struzzjonijiet komprensiv għall-muntatura fissa tal-ħajt tat-TV USX-MOUNT XFM090-15/WFM009-01, iddisinjata għal televiżjonijiet ta' 26-60 pulzier. Jinkludi passi ta' installazzjoni, kontrolli ta' kompatibilità, lista tal-partijiet, u prekawzjonijiet ta' sigurtà.
	USX-MOUNT XML008-1K-01: Manwal ta' Istruzzjoni għal televiżjonijiet ta' 47-84 pulzier Dan id-dokument jipprovdi struzzjonijiet komprensivi għall-installazzjoni tal-muntatura tal-ħajt tat-TV USX-MOUNT XML008-1K-01, adattata għal televiżjonijiet ta' 47-84 pulzier. Jiddeskrivi l-verifiki ta' qabel l-installazzjoni, l-identifikazzjoni tal-partijiet, l-assemblaġġ pass pass għal travi tal-injam u ħitan tal-konkrit solidu, l-ittestjar tal-integrità, l-immuntar tat-TV, u l-aġġustamenti finali. Twissijiet ta' sigurtà u speċifikazzjonijiet tad-dimensjonijiet huma inklużi.
	Manwal tal-Installazzjoni tal-Muntatura tal-Ħajt tat-TV USX-MOUNT XMM006-2 Manwal ta' struzzjonijiet komprensiv għall-installazzjoni tal-muntatura tal-ħajt tat-TV USX-MOUNT XMM006-2 għal televiżjonijiet ta' 26-55 pulzier. Jinkludi kompatibilità VESA, limiti tal-piż, struzzjonijiet għall-immuntar tal-ħajt (studs tal-injam u konkrit), lista tal-partijiet, u gwidi tal-aġġustament.

USX MOUNT XML019