1. Introduzzjoni
The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.
Image 1.1: The FLAMMA FS06 Digital Preamp Pedala.
2. Kontenut tal-Pakkett
- FLAMMA FS06 Pre Diġitaliamp Pedala
- Gwida Quick
- FLAMMA Logo Sticker
Image 2.1: Contents of the FLAMMA FS06 package.
3. Konfigurazzjoni u Konnessjonijiet
3.1 Provvista tal-Enerġija
The FS06 pedal requires a Provvista ta 'enerġija DC 9V with a current output of aktar minn 303mA. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.
3.2 Connecting Your Pedal
The FS06 can be integrated into various audio setups:
- To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar ampaktar ħaj.
- Direct to a Power Ampaktar ħaj: Connect the pedal's output directly to a dedicated power ampaktar ħaj.
- To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.
Image 3.1: Input jack of the FS06 pedal.
Image 3.2: Output jack of the FS06 pedal.
Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.
4. Operazzjoni
4.1 Kontrolli Fuqview
The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:
- BASS: Jaġġusta r-rispons ta' frekwenza baxxa.
- MID: Adjusts the middle-frequency response.
- TRE (Treble): Jaġġusta r-rispons ta' frekwenza għolja.
- LIVELL: Jikkontrolla l-volum ġenerali tal-ħruġ.
- QLIGĦ: Jaġġusta l-ammont ta' overdrive/distorsjoni.
- SAVE SELECT Button: Used to select preamp models and save presets.
- Swiċċ tas-saqajn: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.
Image 4.1: Control knobs and their functions.
Image 4.2: Footswitch functionality.
4.2 Preamp Mudelli
The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.
| Numru | Isem | Amp Model Basis |
|---|---|---|
| 1 | DELUXEBLUE | Based on Fender® Blues Deluxe |
| 2 | AC31 | Based on Vox® AC30 |
| 3 | CORAL REEF | Based on Two Rock® Coral |
| 4 | PLEX 50 | Ibbażat fuq Marshall® Plexi 50 |
| 5 | BLUE EYE 100 | Based on Friedman® BE-100 |
| 6 | MB 5th Gen | Based on Mesa Boogie® MARK V |
| 7 | HVE 5151 | Based on EVH® 5150 |
Immaġni 4.3: Fuqview of the 7 preamp mudelli.
4.3 Issejvjar ta' Presets
Kull preamp model has two channels, allowing you to save a unique preset for each. To save your settings:
- Select your desired preamp model using the SAVE SELECT button.
- Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
- Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.
This allows you to recall your customized tones instantly during performance or practice.
5. Manutenzjoni
To ensure the longevity and optimal performance of your FLAMMA FS06 pedal, follow these maintenance guidelines:
- Tindif: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Ħażna: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- Immaniġġjar: Immaniġġja l-pedala b'attenzjoni. Evita li twaqqagħha jew li tissottomettiha għal impatti qawwija.
- Qawwa: Dejjem skonnettja l-provvista tal-enerġija meta l-pedala ma tkunx qed tintuża għal perjodi twal.
6 Issolvi l-problemi
6.1 No Sound or Weak Signal
- Iċċekkja l-Provvista tal-Enerġija: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
- Konnessjonijiet tal-kejbil: Verify all audio cables are securely connected to the input and output jacks.
- Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your amplifier jew interface awdjo.
- Modalità Bypass: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.
6.2 Imġieba Mhux Mistennija
- Ċiklu tal-Enerġija: Disconnect and reconnect the power supply to reset the pedal.
- Irrisettjar tal-Fabbrika: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | FS06 |
| Piż tal-oġġett | 10.5 uqija (0.3 Kilogrammi) |
| Dimensjonijiet tal-Prodott | 2.75 x 1.97 x 4.78 pulzieri (7 x 5 x 12.1 ċm) |
| Tip ta' Materjal | Metall |
| Sors tal-Enerġija | Corded Elettriku |
| Voltage | 9 Volts DC |
| Format tas-Sinjal | Diġitali |
| Interface tal-Ħardwer | Awdjo 1/4-il pulzier |
| Preamp Mudelli | 7 |
| Saveable Presets | Yes (2 channels per preamp mudell) |
| Cabinet Simulation | Mibnija fil- |
8. Garanzija u Appoġġ
For warranty information, technical support, or further inquiries, please visit the official FLAMMA webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
FLAMMA Official Websit: Visit the FLAMMA Store on Amazon
