CREWORKS 15L Ultrasonic Cleaner (Model DUC-M) - Instruction Manual

Introduzzjoni

The CREWORKS 15L Ultrasonic Cleaner is a professional industrial-grade cleaning machine designed for thorough cleaning of various items. Utilizing 360W of ultrasonic power and 300W of heating power, it generates 40kHz cavitation bubbles to effectively remove rust, tarnish, carbon deposits, and other stains from intricate surfaces. Its robust stainless steel construction ensures durability for long-term use.

1. Setup

1. Spakkjar: Neħħi bir-reqqa l-apparat tat-tindif ultrasoniku u l-aċċessorji kollha mill-imballaġġ. Iċċekkja għal kwalunkwe ħsara.
2. Pjazzament: Place the unit on a stable, level surface away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
3. Imla t-Tank: Open the lid and fill the stainless steel tank with water. For enhanced cleaning, add an appropriate ultrasonic cleaning solution. Do not exceed the 'MAX' fill line.
4. Qabbad l-Enerġija: Ensure the unit is turned off before plugging the power cord into a grounded electrical outlet.

Figure 1: CREWORKS 15L Ultrasonic Cleaner ready for use.

2. Istruzzjonijiet Operattivi

1. Ipprepara l-Oġġetti: Place the items to be cleaned into the included stainless steel basket. Ensure items are not directly touching the bottom of the tank.
2. Issettjat Temperatura: Use the temperature control knob to set the desired cleaning temperature between 70°F and 175°F (20°C to 80°C). The heating indicator light will illuminate.
3. Issettja l-Timer: Use the time control knob to set the cleaning duration from 1 to 30 minutes.
4. Ibda t-Tindif: Press the power button to initiate the ultrasonic cleaning process. The cleaning indicator light will illuminate, and you will hear the cavitation action.
5. Tissorvelja Proċess: The unit will automatically stop the ultrasonic cleaning when the timer expires.
6. Neħħi l-Oġġetti: Once cleaning is complete and the unit has cooled, carefully remove the basket with the cleaned items. Rinse items with clean water if necessary.

Figure 2: Wide application of the ultrasonic cleaner for various items.

3. Manutenzjoni

• Ilma li jbattal: After use, allow the water to cool down. Use the integrated drain valve on the side of the unit to safely empty the tank.
• Tindif tat-Tank: Wipe the stainless steel tank and exterior surfaces with a soft, damp drapp. Evita prodotti tat-tindif li joborxu li jistgħu jagħmlu ħsara lill-finitura.
• Ħażna: Aħżen l-unità f'post frisk u niexef meta ma tkunx qed tuża.
• Protezzjoni tal-fjus: The unit includes a built-in fuse to protect against power surges. If the unit fails to power on, check and replace the fuse if necessary.

Figure 3: Key features contributing to the cleaner's durability and reliable performance.

4 Issolvi l-problemi

• Heater Does Not Turn Off Automatically: Be aware that this unit does not automatically deactivate its heating once the target temperature is reached. ALWAYS turn off the heating unit manually when cleaning sensitive objects or when finished.
• Tindif Insuffiċjenti: Ensure the tank is filled to the appropriate level and that the correct cleaning solution (if used) is mixed according to its instructions. Verify that the temperature and timer settings are suitable for the items being cleaned.
• L-Unità Ma Tixgħel: Check the power cord connection and the electrical outlet. Inspect the built-in fuse and replace if blown.
• Storbju mhux tas-soltu: A humming sound is normal during ultrasonic operation. Excessive or unusual noise may indicate an issue; ensure the unit is on a stable surface and not vibrating against other objects.

5. Speċifikazzjonijiet

Figure 4: Physical dimensions of the ultrasonic cleaner and its basket.

6. Garanzija u Appoġġ

CREWORKS offers a 1-year promise on this product, ensuring quality and reliability. For any inquiries, technical assistance, or customer service, please contact CREWORKS support. Our dedicated team is available 24/7 to assist you.