Introduzzjoni
This manual provides essential information for the setup, operation, and maintenance of your Fender American Professional II Precision Bass. Designed for musicians seeking a familiar yet versatile instrument, this bass features a comfortable '63 P Bass neck profile, smooth rolled fingerboard edges, and a "Super-Natural" satin finish. It is equipped with a new V-Mod II split-coil pickup for articulate sound and a HiMass Vintage Bridge for enhanced sustain and attack.
Setup
1. Spakkjar
Carefully remove your bass from its case. Inspect the instrument for any visible damage that may have occurred during shipping. Retain all packaging materials for future transport or storage.
2. Spezzjoni Inizjali
Examine the neck, body, hardware, and electronics. Ensure all components are securely fastened.
3. Installazzjoni u Irfinar tal-Korda
Your bass comes with factory strings. For optimal performance, ensure they are properly seated and tuned to standard E-A-D-G (from thickest to thinnest string). Use a reliable electronic tuner for accuracy.
Immaġni: Minn quddiem view of the Fender American Professional II Precision Bass in Olympic White with a rosewood fingerboard and tortoise pickguard.
4. Twaħħil taċ-Ċinga
Attach a guitar strap to the strap buttons located on the upper horn and the bottom end of the body. Ensure the strap is securely fastened before playing.
It-Tħaddim tal-Bass Tiegħek
1. Konnessjoni ma' Ampaktar ħaj
Insert a standard 1/4-inch instrument cable into the output jack located on the side of the bass body. Connect the other end of the cable to your bass ampl-input tal-lifer.
Immaġni: Close-up view of the lower body of the Fender Precision Bass, highlighting the volume and tone control knobs, and the 1/4-inch output jack.
2. Kontrolli
- Buttuna tal-Volum: Controls the overall output level of the instrument. Turn clockwise to increase volume, counter-clockwise to decrease.
- Pum tat-Ton: Adjusts the treble frequencies. Turn clockwise for brighter tones, counter-clockwise for warmer, darker tones.
3. Playing Position
Hold the bass comfortably, whether standing or seated. Adjust your strap length to allow for easy access to all frets and controls.
Manutenzjoni
1. Tindif
Regularly wipe down the body, neck, and strings with a soft, lint-free cloth after each use to remove sweat and grime. For the body finish, use a guitar-specific polish sparingly. For the rosewood fingerboard, a specialized fretboard conditioner can be applied periodically to prevent drying.
2. Sostituzzjoni tal-korda
Strings should be replaced regularly, depending on usage, to maintain optimal tone and playability. Replace one string at a time to maintain neck tension. Refer to the headstock image for proper string winding around the tuning machines.
Immaġni: Close-up view of the Fender Precision Bass headstock, showing the four tuning machines and the Fender logo.
3. Kura tal-Freshboard
Keep the rosewood fretboard clean and moisturized. Avoid harsh chemicals. If the fretboard appears dry, apply a small amount of lemon oil or a dedicated fretboard conditioner.
4. Hardware Inspection
Periodically check all screws and nuts on the tuning machines, bridge, and pickguard for tightness. Do not overtighten.
Issolvi l-problemi
This section addresses common issues you might encounter with your bass.
1. L-ebda Ħruġ tal-Ħoss
- Iċċekkja l-Konnessjonijiet tal-Cable: Ensure the instrument cable is securely plugged into both the bass and the ampaktar ħaj.
- AmpEnerġija aktar ħajja: Ivverifika l- amplifier is turned on and its volume is not set to zero.
- Volum tal-bass: Confirm the volume knob on your bass is turned up.
- Integrità tal-Cable: Test with a different instrument cable to rule out a faulty cable.
2. Buzzing or Fret Noise
- Teknika tal-Logħob: Ensure proper finger placement and pressure on the frets.
- String Height (Action): If buzzing persists, the string action might be too low. This may require professional adjustment of the bridge saddles or truss rod.
- Fret Wear: Worn frets can cause buzzing. This typically requires professional fret leveling or replacement.
3. Intonazzjoni Ħażina
If notes played at the 12th fret do not match the harmonic at the 12th fret, the intonation needs adjustment. This involves adjusting the length of each string at the bridge saddles. This is a precise adjustment best performed by an experienced technician.
Immaġni: Close-up view of the Fender Precision Bass bridge, showing the individual saddles and the V-Mod II split-coil pickup.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | American Professional II Precision Bass |
| Numru tal-Mudell | 0193930705 |
| Materjal tal-Korp | Alder |
| Finitura tal-Korp | Gloss Urethane |
| Materjal tal-għonq | Aġġru |
| Neck Finish | "Super-Natural" Satin Urethane with Gloss Urethane Headstock Face |
| Materjal tal-fretboard | Rosewood |
| Numru ta' Frets | 20 |
| Materjal tal-Ġewż | Għadam |
| Pont | 4-Saddle HiMass Vintage (String-Through-Body or Top-Load) |
| Pickups | V-Mod II Split Single-Coil Precision Bass |
| Kontrolli | Master Volume, Master Tone |
| Temm tal-ħardwer | Nickel/Chrome |
| Kordi | Fender USA 7250M Nickel Plated Steel (.045-.105 Gauges) |
| Dimensjonijiet (L x W x H) | 53 x 19 x 6 pulzieri |
| Piż tal-oġġett | 3 liri (Note: This is likely shipping weight, actual instrument weight may vary) |
Garanzija u Appoġġ
Fender instruments are covered by a limited warranty. For specific details regarding your instrument's warranty coverage, please refer to the warranty card included with your purchase or visit the official Fender website. For technical support, service, or parts, contact Fender customer service directly.
Riżorsi onlajn: For additional resources, including FAQs, setup guides, and product registration, visit www.fender.com/support.
