Introduzzjoni
Thank you for choosing the Yaheetech 7.5ft Pre-lit Spruce Artificial Hinged Christmas Pine Tree. This manual provides essential information for the safe assembly, operation, and maintenance of your new Christmas tree. Please read all instructions carefully before setup and retain this manual for future reference.
Istruzzjonijiet tas-Sigurtà
- Kun żgur li l-partijiet kollha jkunu preżenti u mingħajr ħsara qabel l-assemblaġġ.
- Always assemble the tree on a flat, stable surface to prevent tipping.
- Keep children and pets away from the tree during assembly.
- Do not overload electrical outlets. Ensure the tree's power cord is not pinched or damaged.
- Unplug the tree from the power source when not in use or before performing any maintenance.
- Tpoġġix is-siġra ħdejn sorsi ta' sħana jew fjammi miftuħa.
- Use only the provided power adapter and lights.
- If any lights do not work, check for loose bulbs or connections. Spare bulbs may be included and are attached by the plugs.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma inklużi fil-pakkett tiegħek:
- Tree Sections (typically 3 sections for 7.5ft tree: Part A, Part B, Part C)
- Stand tal-metall
- Eyebolts for Stand (3 pieces)
- Protective Caps for Stand Feet (4 pieces)
- Spare Bulbs (attached near light plugs)
Image: Components of the Yaheetech Christmas tree, showing the three main sections and the stand.
Setup Istruzzjonijiet
Follow these steps to assemble your Christmas tree:
- Arma l-Istand:
Unfold the metal stand into a cross shape. Insert the eyebolts into the holes on the stand and tighten them to secure the stand. Place the protective caps on the feet of the stand to prevent scratches on your floor. - Insert the Bottom Section (Part A):
Carefully insert the largest tree section (Part A) into the center hole of the assembled stand. Ensure it is firmly seated. - Insert the Middle Section (Part B):
Place the middle tree section (Part B) into the top of Part A. Align the sections properly. - Insert the Top Section (Part C):
Insert the smallest tree section (Part C) into the top of Part B. - Qabbad id-Dwal:
Locate the light connectors on each section. Connect the corresponding plugs to ensure all pre-assembled lights illuminate. - Fluff and Shape the Branches:
Starting from the bottom section, gently pull apart and spread out each branch and individual tip to create a full and natural appearance. Ensure all small branches are expanded in a V-shape. This process may take 1.5-2 hours for a 7.5ft tree to achieve optimal fullness.
Image: The foldable metal stand with protective caps on its feet.
Image: Diagram showing the three sections of the tree trunk for simple assembly.
Image: Close-up of the pre-assembled warm white lights on the tree branches.
Image: A visual comparison of the tree before and after the branches have been fluffed and shaped.
Video: Official Yaheetech video demonstrating the simple setup process for the Christmas tree.
Istruzzjonijiet Operattivi
Once assembled and plugged in, your Yaheetech Pre-lit Christmas Tree will illuminate with warm white lights. There are no additional controls for the lights; they are designed to be continuously on when plugged into a power source.
Manutenzjoni
- Tindif: Dust the tree periodically with a soft, dry cloth. Do not use liquid cleaners.
- Sostituzzjoni tad-Dawl: If a light bulb burns out, replace it with a spare bulb of the same type and wattage. Spare bulbs are typically attached near the light plugs.
- Ħażna: Before storing, ensure the tree is completely unplugged and dry. Gently compress the branches and disassemble the tree sections in reverse order of assembly. Store all parts in the original box or a suitable storage container in a cool, dry place away from direct sunlight.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dwal ma jaħdmux | Loose connection, burnt-out bulb, power outage. | Check all light connections. Replace any burnt-out bulbs. Ensure the power outlet is functional. |
| Tree is wobbly | Stand not fully secured, sections not properly aligned. | Ensure eyebolts on the stand are tightened. Re-seat tree sections to ensure they are fully inserted and aligned. |
| Il-fergħat jidhru skarsi | Insufficient fluffing. | Spend more time fluffing each individual branch and tip, spreading them out to fill gaps. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Yaheetech |
| Numru tal-Mudell | HWOA-100/2FR(0.2A) |
| Dimensjonijiet tal-Prodott | 52"D x 52"W x 90"H (7.5ft height) |
| Kulur | Aħdar |
| Materjal | Metall, Klorur tal-Polivinil (PVC) |
| Piż tal-oġġett | 29.4 Liri |
| Għadd tal-ponti | 1354 |
| Dawl inkorporat | Iva |
| Kulur Dawl | Abjad sħun |
| Karatteristika Speċjali | Bendable Branch, Prelit |
| Assemblea Meħtieġa | Iva |
Image: Detailed dimensions of the 7.5ft Christmas tree.
Garanzija u Appoġġ
This product is covered by the standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Yaheetech customer support. If you encounter any issues or have questions regarding your product, please visit the official Yaheetech webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom għall-assistenza.