1. Introduzzjoni
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. Setup
2.1. Spakkjar
Neħħi bil-galbu amplifier from its packaging. Retain all packaging materials for future transport or storage. Inspect the amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. Tixgħil u Iċċarġjar
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. Connecting Instruments and Microphones
Il- amplifier features two independent channels:
- Kanal 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- Kanal 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
Kun żgur li l-konnessjonijiet kollha huma siguri qabel ma tixgħel il- ampaktar ħaj.
3. Istruzzjonijiet Operattivi
3.1. Kontrolli tal-Kanal
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. Tqabbil tal-Bluetooth
To stream audio wirelessly from a phone or tablet:
- Attiva l-Bluetooth fuq it-tagħmir mobbli tiegħek.
- Agħfas il-buttuna tal-pairing Bluetooth fuq amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampaktar ħaj.
3.3. Looper Function
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- Ilgħab/Waqqaf: Press once to play the loop. Press again to stop.
- Ħoll: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
Il- amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. Manutenzjoni
4.1. Tindif
Biex tnaddaf il- ampGħal ħmieġ iebes, uża drapp artab u niexef.amp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. Ħażna
Aħżen il- amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. Kura tal-batterija
To maximize the life of the lithium-ion battery:
- Evita li tiċċarġja l-batterija kompletament regolarment.
- Tesponix il- amplifier għal sħana jew kesħa estrema.
- Jekk il- amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5 Issolvi l-problemi
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampaktar ħaj.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output tal-ħoss | Volume controls are low; cables are not connected properly; instrument/microphone issue; ampIl-lifer mhux mixgħul. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm amplifier is powered on and charged. |
| Bluetooth mhux pairing | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampaktar ħaj. |
| Il-Looper mhux qed jirreġistra/jdoqq | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| Ħoss distort | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | Acoustic Junior GO |
| Numru tal-Mudell | 2314400000 |
| Brand | Fender |
| Output Wattage | 100 Watts |
| Dimensjonijiet tal-Prodott | 16 x 20 x 16 pulzier (Għoli x Wisa' x Fond) |
| Piż tal-oġġett | 20.6 liri |
| Tip ta 'batterija | Lithium-Ion rikarikabbli |
| Ħajja tal-batterija | Up to 5 hours (full volume), 12 hours (moderate volume) |
| Konnettività | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| Looper | 90-second with Record/Dub, Play/Stop, Undo |
| Voltage | Universali voltage għal użu globali |
7. Garanzija u Appoġġ
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for warranty claims.
Appoġġ onlajn: www.fender.com/support
