Manwali+

Yottamaster Yottamaster-HC1-C3-GY-EU

Yottamaster M.2 NVMe Dual Bay Offline Clone Enclosure and Docking Station User Manual

Model: Yottamaster-HC1-C3-GY-EU

1. Prodott Aktarview

The Yottamaster M.2 NVMe Dual Bay Enclosure is a versatile device designed for both offline cloning of M.2 NVMe SSDs and functioning as a high-speed external docking station. It supports two M.2 NVMe SSDs simultaneously and offers data transfer rates up to 10Gbps via USB 3.1 Gen2 Type-C. Its robust aluminum construction aids in efficient heat dissipation.

Sploda view of Yottamaster M.2 NVMe Dual Bay Enclosure showing two NVMe SSDs being inserted.
Figura 1: Sploda view of the Yottamaster M.2 NVMe Dual Bay Enclosure, illustrating the insertion of two NVMe SSDs into their respective slots. The device features a sleek, grey aluminum design with a USB 3.1 Gen2 Type-C port and a DC power input.

2. Kontenut tal-Pakkett

  • Yottamaster M.2 NVMe Dual Bay Enclosure
  • USB-C għal USB-C Cable
  • USB-C għal USB-A Cable
  • 5V/4A Power Adapter with multiple international plug adapters (CN, US, EU, UK, JP)
  • Thermal Silicone Pads (2x)
  • SSD Fixing Screws/Rubber Plugs
  • Tornavit Żgħir
  • Manwal għall-Utent (dan id-dokument)

3. Setup u Installazzjoni

3.1 Installazzjoni ta' SSDs M.2 NVMe

  1. Gently slide open the enclosure cover to access the M.2 slots.
  2. Insert your M.2 NVMe SSDs into the designated slots (Source and Target). Ensure the SSDs are fully seated.
  3. Secure the SSDs using the provided rubber plugs or screws, depending on the SSD length (supports 2230, 2242, 2260, 2280 form factors).
  4. Apply the thermal silicone pads onto the SSDs for optimal heat dissipation.
  5. Close the enclosure cover securely.
Diagram showing various M.2 NVMe SSD sizes (2230, 2242, 2260, 2280) and their compatibility with the enclosure.
Figure 2: Illustration detailing the compatibility of the enclosure with different M.2 NVMe SSD form factors, including 2230, 2242, 2260, and 2280. This ensures users can install a wide range of M.2 NVMe drives.

3.2 Qawwa tal-Konnessjoni

Connect the provided 5V/4A power adapter to the DC input port on the enclosure and then to a power outlet. The external power supply is crucial for stable operation, especially during cloning.

Yottamaster enclosure connected to an external 5V 4A power supply for stable performance.
Figure 3: The Yottamaster enclosure is shown connected to its external 5V 4A power supply, emphasizing the importance of a stable power source for reliable operation and data transfer.

4. Istruzzjonijiet Operattivi

4.1 Offline Cloning (Stand-alone Duplication)

This feature allows you to clone an M.2 NVMe SSD without connecting the enclosure to a computer.

  1. Preparazzjoni:
    • Ensure the enclosure is MHUX connected to any computer.
    • Daħħal il- Sors M.2 NVMe SSD into the 'Source' slot.
    • Daħħal il- Mira M.2 NVMe SSD into the 'Target' slot.
    • Importanti: The capacity of the Target SSD must be equal to or larger than the Source SSD. All data on the Target SSD will be overwritten during the cloning process.
    • Connect the 5V/4A power adapter to the enclosure and a power outlet.
  2. Ibda l-Klonazzjoni:
    • Agħfas u żomm the 'START' button on the enclosure.
    • While holding the 'START' button, turn on the power switch.
    • Continue to hold the 'START' button until the 25% progress indicator LED begins to blink. This typically takes 15-20 seconds after the initial power-on sequence where all four LEDs light up and then turn off.
    • Once the 25% LED is blinking, you can release the 'START' button.
  3. Monitoraġġ tal-Progress:
    • The progress indicator LEDs (25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning status.
    • When all four LEDs are solid (100%), the cloning process is complete.
  4. Tlestija:
    • Once cloning is finished, turn off the power switch and safely remove the SSDs.
Diagram illustrating the offline cloning process between two M.2 NVMe SSDs in the Yottamaster enclosure.
Figure 4: Visual representation of the stand-alone offline cloning function. Data is copied from the Source SSD to the Target SSD without requiring a PC connection. A warning indicates that the target disk capacity must be larger than the source disk capacity.

4.2 Online Enclosure Mode (Connecting to PC)

The enclosure can be used as an external dual-bay M.2 NVMe SSD docking station.

  1. Kun żgur li l-SSDs huma installati sew fl-enclosure.
  2. Connect the 5V/4A power adapter to the enclosure and a power outlet.
  3. Connect the enclosure to your computer using either the USB-C to USB-C cable or the USB-C to USB-A cable. For optimal performance (up to 10Gbps), use the USB-C to USB-C cable with a USB 3.2 Gen 2 compatible port on your PC.
  4. The SSDs will appear as external drives on your computer. You may need to initialize and format new SSDs via your operating system's disk management utility before use.
Yottamaster enclosure connected to a laptop via USB-C cable, illustrating ultra-fast data transfer at 10Gbps.
Figure 5: The Yottamaster enclosure is connected to a laptop, demonstrating its capability for ultra-fast data transfer up to 10Gbps via its USB 3.1 Gen2 interface, achieving speeds of approximately 1000MB/s.

5. Manutenzjoni

5.1 Dissipazzjoni tas-Sħana

The enclosure features an all-aluminum design and includes thermal silicone pads to facilitate heat dissipation from the NVMe SSDs. While operating, especially during intensive tasks like cloning or large data transfers, the enclosure may become warm. This is normal and indicates effective heat transfer. Ensure adequate airflow around the device.

Diagram highlighting the all-aluminum enclosure and thermal silicone pads for outstanding heat dissipation.
Figura 6: Intern view of the enclosure, emphasizing its all-aluminum construction and the placement of thermal silicone pads, which work together to provide outstanding heat dissipation performance for the installed SSDs.

5.2 Kura Ġenerali

  • Żomm l-apparat nadif u ħieles mit-trab. Uża drapp artab u niexef għat-tindif.
  • Evita li tesponi l-apparat għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.
  • Twaqqax jew tissuġġetta l-apparat għal impatti qawwija.

6 Issolvi l-problemi

6.1 Cloning Issues

  • Cloning Fails or Stops:
    • Target Disk Capacity: Ensure the target disk's actual capacity is equal to or greater than the source disk's actual capacity. Even a single byte less can cause failure.
    • Holding START Button: Make sure you press and żomm the 'START' button continuously until the 25% progress LED starts blinking, then release. Releasing too early will prevent cloning from starting.
    • No PC Connection: The enclosure must not be connected to a computer during offline cloning.
    • Bad Sectors: If the source SSD contains bad sectors, the cloning process may stop. Scan the SSD for errors before attempting to clone.
    • SSD Initialization: For new target NVMe SSDs, it is recommended to initialize them and ensure they are 'online' in Disk Management before cloning, if using them in enclosure mode first.

6.2 Connection and Performance Issues

  • Apparat Mhux Rikonoxxut:
    • Ensure the power adapter is securely connected and providing power.
    • Try a different USB cable or USB port on your computer.
    • Verify that the SSDs are correctly seated in their slots.
  • Trasferiment tad-Data bil-mod:
    • Ensure you are using a USB 3.1 Gen2 (10Gbps) compatible port on your computer. Older USB 2.0 or 3.0 ports will result in lower speeds.
    • Use the provided USB-C to USB-C cable for best performance.
    • Check the performance of your SSDs; slower SSDs will limit transfer speeds.

7. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
Numru tal-MudellYottamaster-HC1-C3-GY-EU
InterfaceUSB 3.1 Gen2 Tip-Ċ
Rata ta' Trasferiment tad-DataSa 10 Gbps
SSDs appoġġjatiM.2 NVMe PCIe SSDs (M Key / B&M Key)
Daqsijiet SSD appoġġjati2230, 2242, 2260, 2280
Max Capacity per SlotUp to 4TB (8TB total)
MaterjalAluminju
Provvista tal-EnerġijaExternal 5V/4A DC Power Adapter
Sistemi OperattiviWindows, macOS, Linux

8. Garanzija u Appoġġ

8.1 Informazzjoni dwar Garanzija

Yottamaster products typically come with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Yottamaster websit għal termini u kundizzjonijiet dettaljati tal-garanzija speċifiċi għar-reġjun tiegħek.

8.2 Appoġġ għall-Klijent

If you encounter any issues or have questions regarding your Yottamaster M.2 NVMe Dual Bay Enclosure, please contact Yottamaster customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (Yottamaster-HC1-C3-GY-EU) and purchase details ready.

Dokumenti Relatati - Yottamaster-HC1-C3-GY-EU

Preview Manwal tal-Utent tad-Duplikatur tal-Klonu Yottamaster HC1-C3 M.2 NVMe SSD
Manwal tal-utent għall-Yottamaster HC1-C3, duplikatur tal-klonu M.2 NVMe SSD b'kapaċitajiet ta' klonazzjoni offline, interface USB 3.1 Gen2 10Gbps, u installazzjoni mingħajr għodda. Jinkludi l-prodott fuqview, speċifikazzjonijiet, struzzjonijiet operattivi, noti, garanzija, u konformità mal-FCC.
Preview Manwal tal-Utent tal-Enclosure Yottamaster T7400 PCIe Gen4 NVMe M.2 SSD
Manwal komprensiv għall-utent għall-kompartiment Yottamaster T7400 M.2 NVMe SSD, li jagħti dettalji dwar l-installazzjoni, l-użu, il-karatteristiċi, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet għall-prestazzjoni PCIe Gen4.
Preview Tutorja tal-Konfigurazzjoni tal-Array RAID tal-Enclosure tal-Hard Drive Multi-bay ta' Yottamaster
Gwida komprensiva għall-konfigurazzjoni ta' arrays RAID fuq kompartimenti tal-hard drives multi-bay ta' Yottamaster bl-użu tas-softwer tal-ġestjoni RAID. Tgħallem kif tniżżel, tinstalla, u tissettja l-modi RAID għall-ħażna u l-protezzjoni ottimali tad-dejta.
Preview Guida rapida all'installazione Yottamaster Y-Focus Series
Questa guida rapida tipprovdi struzzjonijiet dettagliate għall-installazzjoni u l-konfigurazzjoni tad-dispositivi Yottamaster Y-Focus Series, inkluża l-ġestjoni tad-dischi riġidi u l-impostazzjonijiet RAID.
Preview Guida Utente Yottamaster: Installazzjoni, Konfigurazzjoni RAID u Gestione Dischi
Manuale completo per gli enclosure Yottamaster, che copre l'installazione dei dischi riġidi, il-konfigurazzjoni RAID hardware u software, il-formattazzjoni, is-sostituzione tad-dischi u l-irkuprar tad-dati.
Preview Gwida għall-Aġġustament tal-Modalità Sleep tal-Enclosure tal-HDD ta' Yottamaster
Istruzzjonijiet u gwida għat-tniżżil tal-firmware għall-aġġustament jew il-kanċellazzjoni tal-modalità awtomatika ta' sleep fuq kompartimenti Yottamaster b'ħafna bajjiet HDD, inklużi mudelli ta' appoġġ u links għat-tniżżil.