Manwal tal-Utent tal-Ċarġer tal-Batterija Riċarġjabbli ABSINA AA AAA & 9V

1. Introduzzjoni

Thank you for choosing the ABSINA Rechargeable Battery Charger. This manual provides essential information for the safe and efficient use of your new charger. Please read it thoroughly before operation and keep it for future reference.

Kontenut tal-Pakkett:

• 1x ABSINA X4 Charger for AAA, AA, and 9V batteries
• 4x ABSINA AAA Rechargeable Batteries (1150 min. 1050mAh 1.2V HR03)

2. Informazzjoni dwar is-Sigurtà

• Use this charger only for NiMH and NiCd rechargeable batteries. Do not attempt to charge non-rechargeable batteries or other battery types, as this may lead to explosion, rupture, or leakage, causing personal injury or property damage.
• Do not disassemble, modify, or short-circuit the charger or batteries.
• Żomm il-ċarġer 'il bogħod mill-ilma, l-umdità, u temperaturi għoljin.
• Tħaddimx il-ċarġer jekk ikun ġie bil-ħsara b'xi mod.
• Żgura ventilazzjoni xierqa waqt l-iċċarġjar.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Skonnettja l-ċarġer mill-plagg tal-elettriku meta ma jkunx qed jintuża.

3. Prodott Aktarview

The ABSINA X4 charger is designed for efficient and safe charging of various rechargeable battery types. It features individual slot monitoring and advanced safety functions.

Karatteristiċi ewlenin:

• X4 Charging Station: Allows simultaneous charging of 1-4 Micro AAA (500mA), 1-4 Mignon AA (500mA), or 1-2 9V Block (13mA) batteries.
• Individual Slot Monitoring: Each battery slot is monitored independently for optimal charging.
• Pulse Maintenance Charging: Ensures batteries remain at full capacity after charging.
• Sejbien ta' Batterija Difettuża: Automatically identifies and signals faulty batteries.
• Modalità Tiswija: For discharged batteries, a gentle pre-charge with reduced current is applied.
• Iċċarġjar veloċi: Microcontroller-supervised charge management and overload protection allow batteries to be charged in approximately 2 hours.
• Indikatur LED: Provides clear information on the charging status of each battery.
• Tifi awtomatiku: The charger automatically stops charging once batteries reach full capacity.

Figura 3.1: The ABSINA 4-slot battery charger shown with four included AAA rechargeable batteries. The charger is black with green LED indicators.

Figura 3.2: The ABSINA charger with AA batteries inserted, highlighting its simple operation without unnecessary buttons.

Figura 3.3: An illustration demonstrating the environmental and economic benefit of rechargeable batteries, where one rechargeable battery can replace numerous disposable ones.

4. Setup

1. Spakkja l-Ċarġer: Carefully remove the charger and included batteries from the packaging.
2. Qabbad mal-Enerġija: Plug the charger directly into a standard 100-240V AC 50-60Hz wall outlet. The charger is designed for direct wall plug-in.
3. Daħħal Batteriji: Insert the rechargeable batteries into the appropriate slots. Ensure correct polarity (+ and -) as indicated on the charger and batteries. The charger supports 1-4 AA or AAA batteries, or 1-2 9V block batteries.

Figura 4.1: The charger illustrating its compatibility with AAA, AA, and 9V battery types, indicating the number of cells supported for each type.

5. Istruzzjonijiet Operattivi

Proċess tal-Iċċarġjar:

1. Ladarba l-batteriji jkunu daħħlu sew u l-ċarġer ikun imdaħħal, il-proċess tal-iċċarġjar jibda awtomatikament.
2. The LED indicators above each slot will show the charging status.
3. The charger automatically switches to maintenance charging once batteries are fully charged.
4. Defective batteries will be identified immediately, and their corresponding LED will indicate an error (e.g., red light).

Figura 5.1: The ABSINA charger in operation, plugged into a wall outlet, with an estimated charging time of 2 hours.

Status tal-Indikatur LED:

• LED aħdar: Battery is fully charged or in maintenance mode.
• LED aħmar: Defective battery detected or error during charging.
• Flashing LED (if applicable): Charging in progress (specific behavior may vary, refer to visual cues on the charger).

Figura 5.2: A close-up view of the LED status indicators on the ABSINA charger, showing green lights for charged batteries and a red light for a detected issue.

Figura 5.3: The charger indicating a defective battery with a red LED, demonstrating its fault detection capability.

Tifi awtomatiku:

The charger is equipped with an automatic shut-off function that activates once the batteries are fully charged, preventing overcharging and extending battery life.

Figura 5.4: The charger illustrating its auto-off feature, which activates once batteries are fully charged.

6. Manutenzjoni

• Tindif: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Ħażna: Aħżen il-ċarġer f'post frisk u niexef 'il bogħod mid-dawl tax-xemx dirett u temperaturi estremi.
• Kura tal-batterija: For optimal battery life, avoid completely discharging batteries before recharging.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Specific warranty information for this product is not available in the provided data. For warranty claims or technical support, please refer to the retailer or manufacturer's official websit għall-aktar informazzjoni kurrenti.

Spare parts availability and software update guarantees are not available.