NutriBullet Juicer Centrifugal Juicer Machine User Manual

Introduzzjoni

Welcome to the world of fresh, homemade juice with your new NutriBullet Juicer. This manual provides essential information for the safe and efficient operation, maintenance, and care of your centrifugal juicer. Designed for convenience and performance, the NutriBullet Juicer makes it easy to extract juice from a variety of fruits and vegetables.

Informazzjoni Importanti dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel ma tuża l-apparat. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.

• Always ensure the juicer is properly assembled and all parts are securely locked before operation.
• Do not operate the appliance with a damaged cord or plug. Contact customer service for repair.
• Keep hands and utensils out of the feed chute during operation to prevent injury. Always use the food pusher provided.
• Tgħaddix il-bażi tal-mutur fl-ilma jew f'xi likwidu ieħor.
• Unplug the juicer from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Dan il-prodott huwa ddisinjat għall-użu domestiku biss.
• Product built to North American & Canadian Electrical Standards (110V).

Partijiet u Karatteristiċi

Familiarize yourself with the components of your NutriBullet Juicer:

• 800W Motor Base: The main power unit of the juicer.
• 1.5L Pulp Basin with 3” wide feed chute: Collects pulp and allows for whole fruit/vegetable insertion.
• Stainless Steel Sieve: Jissepara l-meraq mill-polpa.
• 27oz Juice Pitcher: Jiġbor il-meraq estratt.
• Sealing Pitcher Lid with Froth Separator: For storing juice and reducing foam.
• Imbuttur tal-Ikel: Used to guide produce into the feed chute.
• Xkupilja tat-Tindif: For easy cleaning of the sieve.

Figure 1: Fully assembled NutriBullet Juicer with juice pitcher.

Figure 2: Detail of the motor base and juice pitcher.

Figure 3: No-drip spout mechanism.

Figure 4: Control dial for dual speeds.

Setup

Follow these steps for initial assembly:

1. Poġġi l-bażi tal-mutur fuq wiċċ nadif, niexef u stabbli.
2. Daħħal l-għarbiel tal-istainless steel fil-polpa basin, ensuring it is seated correctly.
3. Poġġi l-polpa mmuntata basin and sieve onto the motor base. Align the locking arms on the side of the motor base with the grooves on the pulp basin and push them up until they click into place, securing the assembly.
4. Position the juice pitcher under the juicer's spout.
5. Ensure the control dial is in the 'OFF' position before plugging the unit into a 110V electrical outlet.

Figure 5: Assembling the pulp basin onto the motor base.

Istruzzjonijiet Operattivi

Prepare your fruits and vegetables and begin juicing:

1. Wash all produce thoroughly. For most fruits and vegetables, no slicing or dicing is required due to the 3-inch wide feed chute. Remove large seeds or pits from fruits like peaches or avocados.
2. Ensure the juice pitcher is in place under the spout.
3. Turn the control dial to the desired speed: 'LOW' for softer fruits and vegetables, or 'HIGH' for harder produce.
4. Gradually feed produce into the feed chute using the food pusher. Apply gentle, even pressure. Do not force produce into the chute.
5. Once juicing is complete, turn the control dial to 'OFF' and unplug the unit.
6. The 27 oz. sealing juice pitcher allows you to store fresh juice for up to 48 hours in the refrigerator.

Figure 6: Inserting produce into the feed chute.

Figure 7: Juicer in operation with juice collected.

Figure 8: Pouring fresh juice from the pitcher.

Tindif u Manutenzjoni

Proper cleaning ensures the longevity and hygiene of your juicer. The sieve, pulp basin, and juice pitcher are all dishwasher-safe.

1. Dejjem aqla’ l-juicer qabel ma tnaddaf.
2. Disassemble all removable parts: food pusher, pulp basin, sieve, and juice pitcher.
3. Laħlaħ il-partijiet kollha li jistgħu jitneħħew taħt ilma ġieri immedjatament wara l-użu biex tevita li l-polpa tinxef u teħel.
4. Use the provided cleaning brush to thoroughly clean the stainless steel sieve. Pay special attention to the small holes to ensure optimal performance.
5. All removable parts can be washed on the top rack of a dishwasher.
6. Imsaħ il-bażi tal-mutur b'adamp drapp. Qatt m'għandek tgħaddas il-bażi tal-mutur fl-ilma.
7. Kun żgur li l-partijiet kollha jkunu niexfa għal kollox qabel ma terġa' tgħaqqad jew taħżen.

Issolvi l-problemi

If you encounter issues with your NutriBullet Juicer, refer to the following common problems and solutions:

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information, product registration, or technical support, please visit the official NutriBullet webis-sit jew ikkuntattja s-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

You can also refer to the official User Manual (PDF) available hawn għal dettalji addizzjonali.