Kismile Oscillating Parabolic Space Heater Instruction Manual

Introduzzjoni

This manual provides essential information for the safe and efficient operation of your Kismile Oscillating Parabolic Space Heater. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: Kismile Oscillating Parabolic Space Heater

Istruzzjonijiet Importanti dwar is-Sigurtà

TWISSIJA: Biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment, osserva dan li ġej:

• Dejjem ipplaggja l-ħiters direttament f'ħanut/reċipjent tal-ħajt. Qatt tuża b'korda ta' estensjoni jew vit tal-enerġija rilokabbli (outlet/power strip).
• Dan il-heater huwa sħun meta jintuża. Biex tevita ħruq, tħallix ġilda mikxufa tmiss uċuħ sħan.
• Żomm materjali kombustibbli, bħal għamara, mħaded, friex, karti, ħwejjeġ, u purtieri mill-inqas 3 piedi (0.9 m) minn quddiem il-heater u żommhom 'il bogħod mill-ġnub u wara.
• Attenzjoni kbira hija meħtieġa meta xi heater jintuża minn jew ħdejn tfal jew persuni invalidi u kull meta l-heater jitħalla jaħdem u ma jkunx hemm attenzjoni.
• Tħaddimx xi heater b'korda jew plagg bil-ħsara jew wara li l-heater ma jaħdimx, ikun waqa' jew ġie mħassar b'xi mod. Armi l-heater, jew erġa' lura f'faċilità ta' servizz awtorizzata għal eżaminazzjoni u/jew tiswija.
• Tużax barra.
• Biex skonnettja l-heater, dawwar il-kontrolli fuq OFF, imbagħad neħħi l-plagg mill-iżbokk.
• Daħħalx jew tħallix oġġetti barranin jidħlu f'xi ftuħ ta' ventilazzjoni jew exhaust peress li dan jista' jikkawża xokk elettriku jew nar, jew jagħmel ħsara lill-heater.
• Biex tipprevjeni nar possibbli, m'għandekx timblokka d-dħul tal-arja jew l-egżost bl-ebda mod. Tużax fuq uċuħ rotob, bħal sodda, fejn il-fetħiet jistgħu jiġu mblukkati.
• Ħiter għandu partijiet sħan u b'ark jew sparking ġewwa. Tużahx f'żoni fejn jintużaw jew jinħażnu gażolina, żebgħa, jew fwar jew likwidi li jaqbdu.
• Uża dan il-heater biss kif deskritt f'dan il-manwal. Kwalunkwe użu ieħor mhux rakkomandat mill-manifattur jista 'jikkawża nar, xokk elettriku, jew korriment lil persuni.
• Dejjem aqla l-heater meta ma tkunx qed tuża.

Karatteristiċi tas-Sigurtà Inkorporati:

• Protezzjoni kontra l-qlib: The heater is equipped with a safety tip-over switch that automatically turns the unit off if it is accidentally tipped over. The unit will resume operation once placed upright on a flat, stable surface.
• Protezzjoni ta' sħana żejda: An internal overheat protection system is designed to shut off the unit if internal components reach an unsafe temperature. This prevents potential fire hazards.
• Cool-to-Touch Flocked Grill: The front grill remains cool to the touch during operation, reducing the risk of accidental burns.

Figure 2: Visual representation of Tip-Over and Overheating Protection

Prodott Overview

The Kismile Oscillating Parabolic Space Heater is designed to provide efficient and targeted warmth for indoor spaces. It features adjustable heat settings, an oscillation function, and a convenient timer.

Komponenti:

• Element tat-tisħin: Parabolic radiant dish for focused heat.
• Dials tal-Kontroll: Two rotary dials for power/heat settings and timer.
• Bażi ta' Oxxillazzjoni: Allows for wide-angle heat distribution.
• Manku inkorporat: Għal portabbiltà faċli.

Figure 3: Multi-function regulation dials

Figure 4: Heater with built-in handle for portability

Setup

1. Ippakkja: Neħħi l-ħiter mill-imballaġġ tiegħu bir-reqqa. Żomm l-imballaġġ għall-ħażna barra l-istaġun.
2. Pjazzament: Place the heater on a firm, level surface. Ensure there are no obstructions within 3 feet (0.9 m) of the front, sides, or rear of the heater.
3. Konnessjoni tal-Enerġija: Plug the power cord directly into a 120V AC, 60Hz electrical outlet. Do not use extension cords or power strips.

Istruzzjonijiet Operattivi

Power On/Off and Heat Settings:

Use the right-hand dial (Heat/Oscillation Control) to select the desired heat mode:

• MITFI: Itfi l-ħiter.
• I (Low Heating): Activates the low heat setting (600W).
• I with Oscillation: Activates low heat with 65-degree oscillation.
• II (High Heating): Activates the high heat setting (1000W).
• II with Oscillation: Activates high heat with 65-degree oscillation.

Figure 5: Heat and Oscillation Mode Selection

Timer aġġustabbli:

Use the left-hand dial (Timer Control) to set an operating duration:

• Rotate the dial clockwise to select a time between 30 to 180 minutes.
• The heater will automatically turn off once the set time has elapsed.
• To operate continuously, set the dial to the "ON" position.

Figure 6: Adjustable Timer Settings

Funzjoni ta 'Oxxillazzjoni:

When a heat setting with oscillation is selected, the heater will rotate 65 degrees to distribute warmth across a wider area.

Figure 7: Heater demonstrating 65-degree oscillation

Tisħin Rapidu:

The parabolic design ensures rapid heat output, providing warmth almost instantly after activation.

Figure 8: Heater providing rapid heat

Manutenzjoni

• Tindif: Dejjem aqla’ l-plagg tal-ħiter qabel ma tnaddaf. Uża drapp artab u damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water enters the interior of the heater.
• Ħażna: Meta ma tkunx qed tuża l-ħiter, aħżenh f'post frisk u niexef. Huwa rakkomandat li taħżnu fl-imballaġġ oriġinali tiegħu biex tipproteġih mit-trab u l-ħsara.

Issolvi l-problemi

Speċifikazzjonijiet

Vidjo Uffiċjali tal-Prodott

Watch this official video from Kismile Direct for a visual guide on the heater's features and operation.

Garanzija u Appoġġ

For warranty information, technical support, or any inquiries regarding your Kismile Oscillating Parabolic Space Heater, please contact Kismile Direct customer service. Refer to the product packaging or the official Kismile webis-sit għad-dettalji ta' kuntatt l-aktar aġġornati.