1. Introduzzjoni
The Ledlenser P6R Work is a robust and versatile LED rechargeable torch designed for demanding work environments. It features high dust and water protection (IP68), impact-resistant rubber covers, and chemical resistance, ensuring durability. This manual provides essential information for the proper setup, operation, and maintenance of your P6R Work torch.
2. Prodott Aktarview
Karatteristiċi Ewlenin
- Durabilità: IP68 dust and water protection, impact-protecting rubber covers, chemical resistance, and a protective lens.
- Sistema ta' Fokus Avvanzata: Seamless transition between a focused spot beam and a wide flood beam.
- Funzjonijiet tad-Dawl: Includes SOS, Strobe, and Boost modes.
- Dawl naturali: High CRI 90 for accurate color reproduction.
- Dawl Awżiljarju: Diffused, cool white auxiliary light on the side for close-range illumination.
- Ħajja twila tal-batterija: Up to 45 hours of lighting on a single charge.
- Emergency Light Mode: Provides illumination during power outages.
Komponenti Inklużi
The Ledlenser P6R Work package typically includes the following items:
- Batterija Rikarikabbli
- Kejbil tal-Iċċarġjar Manjetiku
- Stazzjon ta 'ċċarġjar
- Ċinga tal-Idejn
- Borża
- Adapter tal-Enerġija USB
- Intelligent Clip (Belt Clip)
3. Setup
Installazzjoni tal-batterija
- Unscrew the end cap of the torch by turning it counter-clockwise.
- Insert the included rechargeable battery with the positive (+) terminal facing towards the head of the torch.
- Screw the end cap back on clockwise until secure.
Iċċarġjar Inizjali
Qabel l-ewwel użu, iċċarġja kompletament il-batterija.
- Connect the magnetic charging cable to the charging port on the torch. The magnetic connector will snap into place.
- Connect the USB end of the charging cable to the USB power adapter, and then plug the adapter into a power outlet. Alternatively, use the charging station by placing the torch onto it.
- The battery indicator light will show the charging status. A full charge is indicated when the light turns green.
4. Istruzzjonijiet Operattivi
Power On/Off and Brightness Modes
The torch is operated via the main switch button located on the body.
- Biex Tixgħel/Tfi: Press the main switch button once.
- Biex Tiċċikla l-Modalitajiet ta' Luminożità: While the torch is on, press the main switch button repeatedly to cycle through different brightness levels (e.g., Low, Medium, High).
- Modalità Boost: A quick double-press of the main switch button may activate a temporary boost mode for maximum brightness.
Special Functions (SOS, Strobe)
Specific sequences of button presses activate special functions:
- Consult the detailed instructions provided in the full product manual for exact button sequences to activate SOS and Strobe modes. These typically involve holding the button or specific multi-press patterns.
Sistema ta 'Focus Avvanzata
The Advanced Focus System allows you to adjust the light beam from a broad floodlight to a sharply focused spot beam.
- To adjust the focus, slide the head of the torch forward or backward.
- Sliding forward typically narrows the beam for a spot focus.
- Sliding backward widens the beam for a flood illumination.
Dawl Awżiljarju
The P6R Work features a diffused, cool white auxiliary light on the side for close-range tasks.
- To activate the auxiliary light, locate the dedicated button or follow the specific button sequence outlined in the full manual.
- This light is ideal for illuminating immediate surroundings without the intensity of the main beam.
5. Manutenzjoni
Tindif
- Imsaħ il-korp tat-torċa b'ċarruta ratba, damp drapp.
- Do not use abrasive cleaners or solvents, as these can damage the finish or rubber components.
- Clean the lens gently with a lens cleaning cloth to avoid scratches.
Kura tal-batterija
- Charge the battery regularly, even if the torch is not in frequent use, to maintain battery health.
- Store the torch and battery in a cool, dry place.
- If the torch will not be used for an extended period, remove the battery.
Reżistenza għall-Ilma (IP68)
The P6R Work is rated IP68, meaning it is protected against dust ingress and can withstand continuous immersion in water up to a specified depth (typically 1.5 meters for 30 minutes).
- Ensure all caps and covers are securely fastened before exposing the torch to water or dusty environments.
- After exposure to saltwater, rinse the torch with fresh water and dry thoroughly.
6 Issolvi l-problemi
If you encounter issues with your Ledlenser P6R Work torch, refer to the following common solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Torch does not turn on | Low or depleted battery; improperly installed battery; loose connections. | Charge the battery fully. Ensure the battery is inserted correctly with the correct polarity. Tighten the end cap securely. |
| Id-dawl huwa baxx jew jitteptep | Low battery charge; dirty battery contacts. | Recharge the battery. Clean battery contacts with a dry cloth. |
| Torch not charging | Charging cable not properly connected; faulty USB adapter or power source; dirty charging contacts. | Ensure the magnetic charging cable is securely attached. Try a different USB power adapter or power outlet. Clean the charging contacts on both the torch and the cable. |
| Focus system is stiff | Ħmieġ jew debris fil-mekkaniżmu tal-iffukar. | Gently clean the exterior of the focusing mechanism. Avoid forcing the movement. |
If the problem persists after attempting these solutions, please contact Ledlenser customer support.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | 502186 |
| Ħruġ tad-Dawl (Massimu) | 850 Lumens |
| Distanza tar-Raġġ (Massima) | 230-il metru |
| Ħajja tal-Batterija (Massima) | Sa 45 sigħat |
| Reżistenza għall-Ilma | IP68 |
| Tip ta' Sors tad-Dawl | LED (High CRI 90) |
| Sors tal-Enerġija | Batterija tal-jone tal-litju rikarikabbli |
| Materjal | Aluminum with rubber protectors |
| Dimensjonijiet (D x W x H) | 1.57"D x 1.57"W x 6.42"H |
| Piż tal-oġġett | 6.6 uqija (0.19 Kilogrammi) |
8. Garanzija u Appoġġ
Informazzjoni dwar Garanzija
The Ledlenser P6R Work LED torch comes with a warranty that covers defects in manufacturing. With product registration, this warranty can extend up to 7 years. Please refer to the official Ledlenser website or the warranty card included with your product for full terms and conditions.
Appoġġ għall-Klijent
For technical assistance, warranty claims, or further inquiries, please visit the official Ledlenser webis-sit jew ikkuntattja l-appoġġ għall-klijenti tagħhom direttament. Tista' ssib ukoll aktar informazzjoni u prodotti fuq Ħanut Ledlenser fuq Amazon.
