1. Prodott Aktarview
The Beghelli Emergency LED Lamp (Model BEG19500) is a high-quality emergency lighting solution designed to illuminate areas during power outages. This versatile lamp can be installed on walls, ceilings, or recessed, making it suitable for various environments. It features an 11W LED light source and is equipped with a long-lasting LiFe 3.2V 0.5 Ah battery, backed by a 5-year warranty.
Its robust design ensures functionality even in industrial settings, with an IP42 protection rating and IK05 impact resistance.
Figura 1: Quddiem view of the Beghelli Emergency LED Lamp. Il-lamp features a white base and a transparent polycarbonate cover, revealing the LED light source inside.
2. Informazzjoni dwar is-Sigurtà
Always read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the product.
- Kun żgur li l-provvista tal-enerġija hija skonnettjata qabel kwalunkwe xogħol ta' installazzjoni jew manutenzjoni.
- This product operates on 230V. Consult a qualified electrician if unsure about wiring.
- Tesponix l-lamp to extreme temperatures or direct water spray beyond its IP42 rating.
- Do not attempt to open or modify the battery compartment or internal components, except as explicitly instructed.
- Dispose of batteries and electronic components according to local regulations. More information can be found on the manufacturer's website or local waste management authorities.
3. Installazzjoni u Setup
The Beghelli Emergency LED Lamp offers flexible installation options:
- Preparazzjoni:
- Kun żgur li l-provvista ewlenija tal-enerġija għaż-żona tal-installazzjoni tkun mitfija mis-circuit breaker.
- Ippakkja l-lamp and verify all components are present: the lamp unit and included battery.
- Għażliet ta 'Immuntar:
Il-lamp can be mounted on a wall, ceiling, or recessed. The unit has 3 pre-breakage inputs (ø16) and can be installed on a standard 503 recessed box.
- Muntaġġ tal-ħajt/saqaf: Mark the desired mounting points using the lamp's base as a template. Drill holes and secure the lamp bl-użu ta' viti xierqa (mhux inklużi).
- Imnaqqas: Prepare the recess opening according to the lamp's dimensions (L 280 x H 119 x P 46 mm). Ensure sufficient space for wiring.
- Wiring:
- Connect the 230V power supply wires to the lamp's terminals. Ensure correct polarity.
- Il-lamp is designed for simple connection. If replacing an older unit, existing wiring may be compatible.
- Installazzjoni tal-batterija:
The LiFe 3.2V 0.5 Ah battery is included and typically pre-installed or easily connected. Ensure it is securely connected before closing the lamp kopertura.
- Assemblea Finali:
Secure the transparent polycarbonate screen onto the lamp unit. Ensure it clicks into place for proper IP42 protection.
Figure 2: Photometric curve illustrating the light distribution pattern of the Beghelli Emergency LED Lamp. This diagram shows the intensity of light emitted at various angles.
4. Istruzzjonijiet Operattivi
The Beghelli Emergency LED Lamp operates automatically in emergency mode (SA/SE).
- Operazzjoni normali: When main power (230V) is present, the lamp's battery charges. The LED light remains off.
- Operazzjoni ta' Emerġenza: Fil-każ ta' qawwa outage (blackout), the lamp automatically switches on, drawing power from its internal battery to provide emergency illumination.
- Tul tal-batterija: Il-lamp provides 120 lumens for 1 hour or 80 lumens for 2 hours in emergency mode, depending on the configured setting. Refer to the installation instructions for details on adjusting this setting (if applicable, often involves cutting a wire or jumper as per customer reviews).
- Ittestjar: Periodically test the emergency function by temporarily cutting the main power supply to the lamp's circuit. The lamp should illuminate immediately. Restore power after testing.
5. Manutenzjoni
Regular maintenance ensures optimal performance and longevity of your emergency lamp.
- Tindif: Clean the transparent polycarbonate screen periodically with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
- Iċċekkja tal-batterija: The LiFe battery has a 5-year warranty. While designed for long life, it is recommended to perform a full discharge test annually to assess battery health. Allow the lamp to operate until the battery is depleted, then restore power to allow it to fully recharge.
- Spezzjoni Viżwali: Annually inspect the lamp for any signs of physical damage, loose connections, or discoloration.
- Sostituzzjoni: Jekk il-lamp fails to illuminate during a power outage or if the battery duration significantly decreases, the battery may need replacement. Contact a qualified technician for battery replacement.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lamp does not illuminate during power outage. |
|
|
| Lamp illuminates dimly or for a short duration. |
|
|
| Lamp jibqa' mixgħul il-ħin kollu. |
|
|
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Beghelli |
| Numru tal-Mudell | BEG19500 |
| Provvista tal-Enerġija | 230V |
| Wattage | 11W |
| Fluss Luminuż | 120 lumens (1 hour) / 80 lumens (2 hours) |
| Tip ta 'batterija | LiFe 3.2V 0.5 Ah (Lithium Metal) |
| Batterija Inkluża | Iva |
| Tip ta' Installazzjoni | Wall mount, Ceiling mount, Recessed |
| Dimensjonijiet (L x H x P) | 280 x 119 x 46 mm (11.02 x 4.69 x 1.81 pulzieri) |
| Piż | 400 gramma (0.88 lbs) |
| Kulur | Abjad |
| Materjal | Polycarbonate (Screen: Transparent Polycarbonate) |
| Grad ta' Protezzjoni | IP42 |
| Reżistenza għall-Impatt | IK05 |
| Modalità Operattiva | SA/SE (Emergency) |
8. Garanzija u Appoġġ
The Beghelli Emergency LED Lamp (Model BEG19500) comes with a garanzija ta 'sena on its LiFe 3.2V 0.5 Ah battery, ensuring long-term reliability.
For technical support, service, or warranty claims, please contact Beghelli customer service through their official websit jew distributuri awtorizzati. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
For information on recycling and disposal of the product, especially the battery and LED components, please refer to local regulations and guidelines for electronic waste. More information can be found on the manufacturer's website or local waste management authorities.
