WORKPRO 20V Cordless Angle Grinder Kit User Manual

1. Introduzzjoni u Fuqview

The WORKPRO 20V Cordless Angle Grinder Kit is a versatile and portable power tool designed for grinding, cutting, and polishing various materials. Its cordless design offers freedom of movement for both indoor and outdoor applications. Equipped with a powerful 20V 4.0Ah Lithium-Ion battery and a fast charger, this tool ensures stable and long-lasting performance. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting to help you achieve optimal results.

Figure 1.1: Complete WORKPRO 20V Cordless Angle Grinder Kit.

2. Informazzjoni Importanti dwar is-Sigurtà

Dejjem aqra u ifhem it-twissijiet u l-istruzzjonijiet kollha tas-sigurtà qabel ma tħaddem din l-għodda tal-enerġija. Jekk ma ssegwix it-twissijiet u l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, u/jew korriment serju.

2.1 Sigurtà Ġenerali tal-Għodda tal-Enerġija

• Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol tiegħek nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
• Sigurtà Elettrika: Evita kuntatt tal-ġisem ma' uċuħ ertjati jew ertjati (eż., pajpijiet, radjaturi, fuklari, refriġeraturi). Hemm riskju akbar ta' xokk elettriku jekk ġismek ikun ertjat jew ertjat.
• Sigurtà Personali: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Wear appropriate clothing; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Din se tagħmel ix-xogħol aħjar u b'mod aktar sikur bir-rata li ġiet iddisinjata għaliha. Skonnettja l-pakkett tal-batterija mill-għodda tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.

2.2 Specific Angle Grinder Safety

• Dejjem uża l-protezzjoni pprovduta mal-għodda. Kun żgur li l-protezzjoni tkun imwaħħla sew u pożizzjonata għall-massimu tas-sigurtà.
• Use only grinding wheels and cutting discs that are specifically designed for an angle grinder and are rated for the tool's maximum RPM.
• Sikura l-biċċa tax-xogħol. Uża clamps or a vise to hold the workpiece firmly. This frees both hands to operate the tool safely.
• Żomm qabda soda fuq l-għodda biż-żewġ idejn waqt l-operazzjoni.
• Be aware of kickback. Kickback is a sudden reaction to a pinched or snagged rotating wheel. Always maintain proper footing and balance.

3. Kontenut tal-Pakkett

Your WORKPRO 20V Cordless Angle Grinder Kit includes the following components:

• 1 x Cordless Angle Grinder
• 1 x Batterija tal-jone tal-litju ta' 4.0Ah
• 1 x Ċarġer Mgħaġġel
• 1 x Rubberized 3-Position Anti-Slip Auxiliary Handle
• 1 x Grinding Wheel Protector
• 1 x Cutting Wheel Protector
• 5 x Metal Cutting Wheels (4-1/2”)
• 5 x Grinding Wheels (4-1/2”)
• 1 x Spanner

Figure 3.1: Included discs, guards, and spanner. Figure 3.2: 4.0Ah Lithium-Ion Battery and Fast Charger.

4. Setup

4.1 Twaħħil tal-Manku Awżiljarju

The auxiliary handle can be installed in three different positions (left, right, or top) to provide optimal comfort and control for various tasks and user preferences. Simply screw the handle into the desired threaded opening on the grinder head.

Figure 4.1: The 3-position anti-slip auxiliary handle for enhanced ergonomics.

4.2 Installing Wheel Guards

Select the appropriate wheel guard (grinding or cutting) for your task. The guards feature a quick-installation mechanism that does not require additional tools. Align the guard with the grinder head and snap it into place, ensuring it is securely fastened and positioned to deflect sparks and debris away from you.

4.3 Installing Grinding/Cutting Discs

1. Ensure the battery is removed from the grinder.
2. Press and hold the spindle lock button located on the grinder head.
3. Poġġi l-flanġ ta' ġewwa fuq l-ispindle.
4. Position the desired grinding or cutting disc onto the spindle, ensuring it sits flush against the inner flange.
5. Place the outer flange onto the spindle, on top of the disc.
6. Use the provided spanner to tighten the outer flange clockwise until the disc is securely fastened. Release the spindle lock.

4.4 Iċċarġjar tal-batterija

Before first use, fully charge the 4.0Ah Lithium-Ion battery. Connect the fast charger to a standard power outlet. Slide the battery pack onto the charger until it clicks into place. The charger's indicator light will show the charging status (e.g., red for charging, green for fully charged). Once fully charged, remove the battery from the charger.

5. Istruzzjonijiet Operattivi

5.1 Tixgħel/Jitfi

The angle grinder features an ergonomic two-step operational switch located in the center of the top for convenient access by both left- and right-handed users. To turn the tool ON, push the switch forward and then up. To turn the tool OFF, simply push the switch down.

Figure 5.1: The two-step operational switch for safe and convenient use.

5.2 Grinding Operations

For grinding tasks, ensure the grinding wheel protector is installed and a grinding disc is securely attached. Hold the grinder firmly with both hands, maintaining a stable stance. Apply light, even pressure to the workpiece, allowing the 7500 RPM speed to do the work. Move the grinder smoothly across the surface to achieve desired results. The tool's lightweight design (3.5 pounds without battery) helps reduce hand pressure during extended use.

Figure 5.2: Grinding metal with the WORKPRO Angle Grinder, demonstrating sparks and stable operation.

5.3 Operazzjonijiet ta' Qtugħ

When cutting, use the cutting wheel protector and a suitable cutting disc. Position the workpiece securely. Start the grinder before making contact with the material. Guide the disc through the material with steady, controlled movements. Avoid twisting or binding the disc, which can cause kickback. The tool's ergonomic design and rubberized grip provide a better user experience during cutting tasks.

6. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your WORKPRO Angle Grinder.

6.1 Tindif

• After each use, clean the tool with a soft, dry cloth.
• Periodically clear dust and debris from the ventilation openings to ensure proper heat dissipation. The grinder features a stereo circulating heat dissipation system with multiple vents for more uniform heat dissipation.
• Tużax ilma jew prodotti kimiċi tat-tindif.

Figure 6.1: Stereo Circulating Heat Dissipation through multiple vents.

6.2 Kura tal-Batterija

• Aħżen il-batteriji f'post frisk u niexef 'il bogħod mix-xemx diretta u temperaturi estremi.
• Do not store fully discharged batteries for long periods. Recharge them periodically.
• Avoid exposing the battery to moisture or water.

6.3 Spezzjoni u Sostituzzjoni tad-Diska

• Inspect grinding and cutting discs before each use for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Always use the correct type and size of disc for your application.

7 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bl-angle grinder tiegħek.

8. Speċifikazzjonijiet

Technical details for the WORKPRO 20V Cordless Angle Grinder Kit:

• Ditta: XOGĦOL PRO
• Numru tal-Mudell: W125051A
• Sors tal-Enerġija: Mħaddma bil-batterija
• Tip ta 'batterija: 20V 4.0Ah Lithium-Ion
• Veloċità ta' Rotazzjoni Massima: 7500 RPM
• Dijametru tad-Diska: 4-1/2 pulzieri
• Materjal: Aluminum (housing)
• Kulur: Aħdar
• Piż tal-Oġġett (mingħajr batterija): 3.5 liri (madwar 1.59 kg)
• Dimensjonijiet tal-Prodott: 13.58"T x 5.91"W x 7.48"Għ
• Manifattur: HANZGHOU GREATSTAR INDUSTRIJALI Co.Ltd
• UPC: 820909764120

9. Garanzija u Appoġġ

For detailed warranty information or technical support, please refer to the official user guide PDF provided with your product or visit the WORKPRO website. You can access the user guide hawn.