Caliber CAM030 Wired Rear View Manwal għall-Utent tal-Kamera

Introduzzjoni

Thank you for choosing the Caliber CAM030 Wired Rear View Camera. This manual provides essential information for the proper installation, operation, and maintenance of your new camera. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

Figure 1: Caliber CAM030 Rear View Kamera

Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat:

• Ensure the vehicle's power is off before beginning installation.
• Ikkonsulta professjonist jekk m'intix ċert dwar xi passi tal-installazzjoni.
• Do not expose the camera to extreme temperatures or direct water immersion.
• Uża biss il-kejbils u l-aċċessorji pprovduti.
• Żomm fejn ma jintlaħaqx mit-tfal.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-oġġetti kollha huma preżenti fil-pakkett:

• Caliber CAM030 Rear View Kamera
• Cable tal-Vidjo RCA
• Kejbil tal-Enerġija
• Mounting Hardware (screws, bracket)
• Manwal għall-Utent (dan id-dokument)

Setup u Installazzjoni

The Caliber CAM030 is designed for aftermarket installation and connects to a compatible monitor via an RCA connector. Follow these steps for proper installation:

1. Agħżel Post tal-Immuntar: Select a suitable location at the rear of your vehicle, typically near the license plate or bumper, that provides a clear view. The camera is designed for a wide-angle view ta’ 170 grad.


Figure 2: Typical mounting location near the license plate.

2. Immonta l-Kamera: Secure the camera using the provided mounting bracket and screws. Ensure it is firmly attached and angled correctly for optimal visibility.

Figure 3: Camera with mounting bracket.
3. Qabbad l-Enerġija: Connect the camera's power cable to the vehicle's reverse light circuit. This allows the camera to automatically power on when the vehicle is put into reverse gear. Ensure proper polarity.
4. Qabbad il-Kejbil tal-Vidjo: Route the RCA video cable from the camera to your in-car monitor. Connect the RCA plug from the camera to the corresponding RCA input on your monitor.
5. Ittestja l-Installazzjoni: Once all connections are made, turn on your vehicle and shift into reverse gear to test the camera's functionality. Adjust the camera's angle if necessary.

Figure 4: Compact size of the CAM030 camera.

Istruzzjonijiet Operattivi

The Caliber CAM030 is designed for simple, automatic operation:

• Attivazzjoni Awtomatika: When properly installed and connected to the reverse light circuit, the camera will automatically activate and display the rear view on your connected monitor as soon as you shift your vehicle into reverse gear.
• Angolu Wide View: The camera features a 170-degree wide-angle lens, providing a broad field of vision to assist with parking and maneuvering.
• Kwalità tal-Immaġni: The camera captures video in 1080p resolution using CMOS sensor technology for clear images.

Manutenzjoni

To ensure the longevity and optimal performance of your camera:

• Tindif: Naddaf il-lenti tal-kamera perjodikament b'drapp artab u dryer.amp drapp biex tneħħi l-ħmieġ, it-trab, jew tbajja’ ta’ ilma li jistgħu jostakolaw viewTużax kimiċi ħarxa.
• Spezzjoni tal-Cable: Regularly check the cables for any signs of wear, fraying, or damage. Ensure all connections remain secure.
• Protezzjoni Ambjentali: While the camera is designed for outdoor use, avoid exposing it to extreme pressure washing or prolonged submersion in water.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or visit the official Caliber websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

Nota: Informazzjoni dwar id-disponibbiltà tal-ispare parts u l-aġġornamenti tas-softwer mhijiex disponibbli bħalissa.