Manwal tal-Utent tal-Kamera Dome PTZ Analoga HD Full-HD 2MP Hanwha Techwin HCP-6320HA

Introduzzjoni

This manual provides essential instructions for the installation, operation, and maintenance of your Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Informazzjoni dwar is-Sigurtà

• Installation must be performed by qualified personnel in accordance with all local codes and regulations.
• Ensure the power supply (24V AC) matches the camera's requirements. Disconnect power before any installation or maintenance procedures.
• Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
• Avoid direct exposure of the lens to strong light sources, as this may damage the image sensor.
• This product is designed for outdoor use with IP66 weather protection and IK10 vandal resistance.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:

• HCP-6320HA PTZ Dome Camera
• Gwida għall-Utent (dan id-dokument)
• Mounting hardware (if included in standard package)

Prodott Overview

The Hanwha Techwin HCP-6320HA is a high-performance Full-HD 2MP Analog HD PTZ (Pan-Tilt-Zoom) dome camera designed for outdoor surveillance. It features a powerful 32x optical zoom lens (4.44-142.6mm), Day & Night functionality with an IR Cut Filter (ICR), Wide Dynamic Range (WDR 120dB), and advanced noise reduction (SSNRIII).

Figura 1: Quddiem view of the Hanwha Techwin HCP-6320HA PTZ Dome Camera. The camera features a white dome housing with a clear protective bubble covering the lens assembly. The "Wisenet" logo is visible on the upper part of the dome.

Karatteristiċi Ewlenin

• 2 Megapixel (1920 x 1080) Full HD Resolution
• Sensorju CMOS ta' 1/2.8"
• 32x Optical Zoom (4.44 ~ 142.6mm)
• Day & Night (ICR) and Defog functions
• WDR (120dB) and SSNRIII (Digital Noise Reduction)
• High-speed Pan/Tilt: 700°/sec preset speed
• IP66 Weatherproof and IK10 Vandal-Proof ratings
• Analog HD (AHD/TVI/CVI/CVBS selectable) video output
• RS-485 and Coaxitron (Up the Coax) control

Setup u Installazzjoni

Immuntar tal-Kamera

The HCP-6320HA is designed for wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 7 lbs) and any associated cabling.

1. Agħżel post adattat għall-immuntar li jipprovdi l-kamp mixtieq ta' view u jkun fil-qrib tal-kejbils tal-enerġija u tal-vidjo.
2. Use the provided mounting template (if applicable) to mark drilling points for the mounting bracket.
3. Drill pilot holes and secure the mounting bracket to the surface using appropriate screws and anchors.
4. Waħħal il-kamera mal-bracket tal-immuntar, waqt li tiżgura li tkun imwaħħla sew.

Konnessjonijiet tal-Wiring

The camera requires a 24V AC power supply and uses wired connectivity for video and control.

1. Konnessjoni tal-Enerġija: Connect the 24V AC power supply to the camera's power input. Ensure correct polarity.
2. Output tal-vidjo: Connect the analog HD video output (BNC connector) to your DVR or video monitoring system. The camera supports various analog HD formats (AHD, TVI, CVI) and CVBS, which can typically be selected via the OSD menu or DIP switches.
3. Kontroll (Mhux obbligatorju): For PTZ control, connect the RS-485 communication lines (Tx+/Tx-) to your DVR or PTZ controller. Alternatively, Coaxitron (Up the Coax) control can be used if supported by your DVR, eliminating the need for separate RS-485 wiring.

Konfigurazzjoni Inizjali

After physical installation and wiring, power on the camera. Access the camera's On-Screen Display (OSD) menu via your DVR or controller to configure settings such as video format, PTZ protocols, and image adjustments.

It-tħaddim tal-Kamera

Pan, Tilt, and Zoom (PTZ) Control

The HCP-6320HA offers precise PTZ control, allowing you to remotely adjust the camera's viewangolu tal-ing u livell taż-żum.

• Ħobż: Rotate the camera horizontally (360° continuous).
• Mejjel: Adjust the camera vertically.
• Zoom: Use the 32x optical zoom to magnify distant objects.
• Fokus: The camera typically features auto-focus, but manual focus may be available via the OSD menu.

Preset and Tour Functions

Configure specific camera positions (presets) and sequences of presets (tours) for automated surveillance.

• Issettjar Presets: Move the camera to the desired position, zoom, and focus, then save it as a preset through your DVR or controller interface. The camera supports high-speed preset recall.
• Running Tours: Create a tour by linking multiple presets in a specific order and duration.

Settings tal-Immaġni

Adjust various image parameters through the OSD menu to optimize video quality for different lighting conditions.

• WDR (Medda Dinamika Wiesgħa): Improves visibility in scenes with both very bright and very dark areas.
• Jum u Lejl: Automatically switches between color (day) and black & white (night) modes, utilizing the IR Cut Filter (ICR).
• SSNRIII: Reduces digital noise in low-light conditions.
• Deċpar: Enhances image clarity in foggy or hazy environments.

Manutenzjoni

Tindif

• Naddaf regolarment l-għatu tad-domu tal-kamera b'ċarruta ratba u damp cloth to remove dust and dirt. Avoid abrasive cleaners.
• Ensure the lens is free from smudges or obstructions for clear image quality.

Aġġornamenti tal-Firmware

Periodically check the Hanwha Techwin website for firmware updates. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.

Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and technical support, please refer to the official Hanwha Techwin website or contact your authorized dealer. Keep your purchase receipt for warranty claims.