WORKPRO W114016 20-Inch Universal Lug Wrench Instruction Manual

1. Introduzzjoni

The WORKPRO W114016 20-inch Universal Lug Wrench is designed for efficient removal and installation of lug nuts on vehicle wheels. Its cross-bar design provides enhanced leverage and torque compared to standard L-shaped wrenches. This tool features four different lug nut socket sizes to accommodate a wide range of vehicles, constructed from heat-treated, chrome-vanadium plated steel for durability and corrosion resistance. This manual provides essential information for safe and effective use of your lug wrench.

2. Informazzjoni dwar is-Sigurtà

• Always consult your vehicle's owner's manual for proper jack placement and tire changing instructions.
• Ensure the vehicle is on a flat, stable surface and the parking brake is engaged before attempting to loosen or tighten lug nuts.
• Use wheel chocks to prevent the vehicle from rolling.
• Ilbes tagħmir protettiv personali xieraq, bħal ingwanti, biex tevita l-korrimenti.
• Do not use extension pipes or other unauthorized tools to increase leverage, as this can damage the lug wrench or lug nuts.
• Verify the correct socket size for your lug nuts to prevent rounding or damage.
• After changing a tire, re-check lug nut tightness after the first 50 miles of driving.

3. Prodott Aktarview

The WORKPRO W114016 Lug Wrench is a robust tool designed for tire maintenance. Its key features include:

• Waħħal Universali: Equipped with four common lug nut sizes (11/16 inch, 3/4 inch, 13/16 inch, 7/8 inch SAE and 17 mm, 19 mm, 21 mm, 22 mm).
• Enhanced Torque: The 20-inch cross-bar design provides superior leverage for easier loosening and tightening of stubborn lug nuts.
• Kostruzzjoni Durabbli: Made from heat-treated, chrome-vanadium plated steel for high strength and resistance to corrosion.
• Użu versatili: Ideal for use when power or air tools are unavailable.

Figure 1: WORKPRO W114016 20-Inch Universal Lug Wrench. This image shows the full cross-shaped lug wrench, highlighting its four different socket ends.

Figura 2: Close-up view of the lug wrench ends, clearly showing the various SAE and metric sizes stamped on each socket for easy identification.

4. Speċifikazzjonijiet

5. Setup

The WORKPRO W114016 Lug Wrench is ready for immediate use upon unboxing. No assembly is required.

1. Identify Lug Nut Size: Determine the correct size of your vehicle's lug nuts. The lug wrench provides four different sizes on its ends.
2. Select Correct Socket: Choose the socket on the lug wrench that fits snugly over your vehicle's lug nuts. A proper fit is crucial to prevent rounding the lug nuts.

6. Istruzzjonijiet Operattivi

6.1. Loosening Lug Nuts

1. Ipprepara Vettura: Park the vehicle on a flat, stable surface. Engage the parking brake. If changing a flat tire, place wheel chocks on the opposite wheel.
2. Access Lug Nuts: If applicable, remove the wheel cover or hubcap to expose the lug nuts.
3. Ċavetta tal-Pożizzjoni: Place the correct size socket of the lug wrench onto a lug nut. Ensure it is fully seated.
4. Applika l-Forza: With both hands, apply steady, firm pressure in a counter-clockwise direction to loosen the lug nut. Use the cross-bar design to maximize leverage.
5. Loosen All Nuts: Loosen all lug nuts on the wheel by about half a turn. Do not remove them completely at this stage.
6. Jack Up Vehicle: Once all lug nuts are loosened, use a jack to lift the vehicle until the tire is clear of the ground.
7. Remove Lug Nuts: Fully remove the loosened lug nuts and place them in a safe location.
8. Neħħi r-Rota: Carefully remove the wheel from the hub.

6.2. Tightening Lug Nuts

1. Mount Wheel: Place the wheel onto the hub, aligning the bolt holes.
2. Hand-Tighten Nuts: Thread the lug nuts onto the wheel studs by hand. Ensure they are not cross-threaded.
3. Snug Nuts: Using the lug wrench, tighten the lug nuts until they are snug. Tighten them in a star pattern (e.g., skip every other nut) to ensure even seating of the wheel.
4. Vettura t'isfel: Lower the vehicle until the tire just touches the ground, but the full weight is not yet on the wheel.
5. Issikkar finali: Continue tightening the lug nuts in a star pattern until they are fully secure. Refer to your vehicle's owner's manual for the recommended torque specifications.
6. Fully Lower Vehicle: Completely lower the vehicle and remove the jack and wheel chocks.
7. Ibdel il-Qoxra: Reinstall the wheel cover or hubcap if applicable.

7. Manutenzjoni

• Tindif: Wipe the lug wrench clean after each use to remove dirt, grease, or moisture.
• Ħażna: Store the lug wrench in a dry place to prevent rust and corrosion.
• Spezzjoni: Periodically inspect the lug wrench for any signs of damage, bending, or wear. Replace if damaged.

8 Issolvi l-problemi

9. X'hemm fil-Kaxxa

• 1 x WORKPRO W114016 20-Inch Universal Lug Wrench

10. Garanzija u Appoġġ

For warranty information or product support, please refer to the documentation included with your purchase or contact WORKPRO customer service directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Prime-Line Products