ANYCUBIC 405nm UV Photopolymer Resin User Manual (Grey, 1kg)

1. Introduzzjoni

This manual provides essential information for the safe and effective use of ANYCUBIC 405nm UV Photopolymer Resin. This high-precision, fast-curing resin is specifically formulated for LCD 3D printing, offering excellent detail and stability for your projects.

Image: A bottle of ANYCUBIC Standard Resin (Grey, 1kg) next to a detailed grey 3D printed miniature figure, showcasing the resin's capabilities.

2. Informazzjoni dwar is-Sigurtà

WARNING: UV resin is a chemical product. Always follow safety precautions to prevent injury or exposure.

• Tagħmir Protettiv Personali (PPE): Always wear chemical-resistant gloves (nitrile or butyl rubber) and safety glasses to protect skin and eyes from direct contact with liquid resin.
• Ventilazzjoni: Use the resin in a well-ventilated area to minimize inhalation of fumes. Consider using a respirator if ventilation is inadequate.
• Kuntatt mal-ġilda: In case of skin contact, wash immediately and thoroughly with soap and water. Do not use solvents.
• Kuntatt mal-għajnejn: F'każ ta' kuntatt mal-għajnejn, laħlaħ immedjatament b'ħafna ilma għal mill-inqas 15-il minuta u fittex attenzjoni medika.
• Inġestjoni: Do not ingest. If swallowed, do not induce vomiting. Rinse mouth and seek medical attention immediately.
• Ħażna: Store resin in a cool, dry, dark place, away from direct sunlight and heat sources. Keep out of reach of children and pets. Ensure the bottle is tightly sealed to prevent moisture and air exposure.
• Rimi: Dispose of liquid resin and contaminated materials according to local regulations. Cured resin can typically be disposed of as regular plastic waste.

Image: Safety and usage recommendations for resin, emphasizing shaking before use, recommended temperature (25-30°C), wearing gloves, and proper storage away from children and light.

3. Prodott Aktarview

ANYCUBIC 405nm UV Photopolymer Resin is engineered for high-performance LCD 3D printing. Key features include:

• Efficient and Stable: High fluidity and fast curing properties ensure efficient printing. Cured models exhibit good stability in humid and corrosive environments.
• Preċiżjoni Għolja: Features low shrinkage (3.72-4.24%) for accurate model reproduction and smooth surface finishes.
• Kulur Vibranti: Contains high-quality pigments for bright and consistent color effects in printed objects.
• Kompatibilità Universali: Designed for use with most LCD/DLP 3D printers operating at a 405nm UV wavelength.

Immaġni: Fuqview of ANYCUBIC resin properties, including light odor, fluidity, quality, and toughness, with examples of printed models.

4. Setup u Preparazzjoni

1. Shake the Resin Bottle: Before each use, shake the resin bottle thoroughly for at least 30 seconds to ensure pigments and components are evenly mixed.
2. Temperatura Ottimali: For best results, use the resin at an ambient temperature between 15°C and 35°C (59°F and 95°F). Lower temperatures can increase resin viscosity, potentially affecting print quality.
3. Kompatibbiltà tal-printer: Ensure your 3D printer is compatible with 405nm UV photopolymer resins.
4. Clean the Vat: Before pouring new resin, ensure the resin vat (FEP film) is clean and free of any cured resin particles or debris.
5. Level the Build Plate: Verify that your printer's build plate is properly leveled according to the manufacturer's instructions.

Image: Comparison of old and new ANYCUBIC resin packaging, indicating a product update.

5. Operating Instructions (3D Printing Process)

The following steps outline a general workflow for using ANYCUBIC resin with an LCD 3D printer. Always refer to your specific 3D printer's manual for detailed operating procedures and recommended settings.

1. Prepare Your Model: Use slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model. Add supports as necessary and orient the model for optimal printing.
2. Apply Printing Parameters: Input the recommended printing parameters for ANYCUBIC resin into your slicing software. These parameters can vary based on your specific printer model and desired layer thickness.
3. Pour Resin: Carefully pour the shaken resin into the printer's resin vat, ensuring it does not exceed the maximum fill line.
4. Ibda l-Istampar: Ittrasferixxi l-imqatta file to your 3D printer and initiate the printing process. Monitor the first few layers to ensure proper adhesion.
5. Wara l-ipproċessar: Ladarba l-istampar ikun lest, neħħi l-pjanċa tal-bini bir-reqqa.

Parametri tal-Istampar Rakkomandati

The table below provides general recommended settings for various ANYCUBIC Photon series printers. These are starting points and may require fine-tuning for your specific environment and desired print quality.

Image: A detailed table listing recommended printing parameters for different ANYCUBIC Photon 3D printer models.

Immaġni: Eżamples of intricate 3D printed models, showcasing the resin's ability to produce high-precision objects with minimal shrinkage.

6. Manutenzjoni u Ħażna

1. Cleaning Prints: After printing, carefully remove the model from the build plate. Wash the printed model with isopropyl alcohol (IPA) or a dedicated resin cleaner to remove uncured resin. Use a soft brush if necessary.
2. Curing Prints: Place the cleaned model in a UV curing station or expose it to direct sunlight until fully cured. Ensure all surfaces are exposed to UV light for complete hardening.
3. Resin Storage:
   • Store unused resin in its original, opaque bottle, tightly sealed.
   • Keep the resin in a cool, dry, and dark place, ideally between 15°C and 35°C (59°F and 95°F).
   • Avoid direct sunlight or any UV light exposure, as this will cure the resin in the bottle.
   • If resin has been in the vat for an extended period, filter it back into the bottle through a mesh filter to remove any cured particles before storing.

7. Issolvi l-problemi ta' Kwistjonijiet Komuni

While ANYCUBIC resin is designed for reliability, issues can occasionally arise. Here are some general troubleshooting tips:

• Failed Prints/Poor Adhesion:
  • Ensure the build plate is properly leveled and clean.
  • Increase bottom exposure time to improve initial layer adhesion.
  • Verify the ambient temperature is within the recommended range.
  • Check the FEP film for damage or cloudiness.
• Layer Separation/Delamination:
  • Increase normal exposure time slightly.
  • Ensure the resin is thoroughly mixed.
  • Check for stable room temperature during printing.
• Soft or Brittle Prints:
  • Ensure models are fully cleaned of uncured resin before curing.
  • Increase post-curing time or intensity.

8. Speċifikazzjonijiet tal-Prodott

Image: Detailed product parameters for ANYCUBIC Standard Resin.

9. Garanzija u Appoġġ

For warranty information, technical support, or further assistance, please visit the official ANYCUBIC webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.

Official ANYCUBIC Store: ANYCUBIC Official Store on Amazon