iDOO ID-IG201

Manwal tal-Utent tas-Sistema tat-Tkabbir tal-Idroponika iDOO ID-IG201

Model: ID-IG201 | Brand: iDOO

1. Introduzzjoni

The iDOO Hydroponics Growing System ID-IG201 is an indoor herb garden starter kit designed for cultivating plants without soil. It features a water circulation system, LED grow lights, and smart modes to support plant growth from germination to harvest. This manual provides essential information for setting up, operating, and maintaining your hydroponic system.

iDOO Hydroponics Growing System with lush green plants

Figure 1: The iDOO Hydroponics Growing System with mature plants.

2. Komponenti Overview

Qabel l-assemblaġġ, kun żgur li l-komponenti kollha huma preżenti:

  • Hydroponic Growing System Base with Water Tank
  • Adjustable LED Grow Light Panel
  • 7 Plant Pods (Baskets)
  • 7 Kabbar Sponoż
  • Nutrient Solutions (A and B)
  • Dome Covers for Germination
  • Plant Support Sticks (if included)
Components of the iDOO Hydroponics Growing System including pods, sponges, and nutrient bottles

Figure 2: Essential components for planting, including grow sponges and nutrient bottles.

3. Istruzzjonijiet ta' Setup

  1. Assemble the System: Place the LED grow light panel onto the adjustable pole and secure it to the system base.
  2. Prepare Water and Nutrients: Fill the water tank with clean water up to the 'Max' line. Add the recommended amount of Nutrient Solution A and Nutrient Solution B according to the instructions on the bottles. Stir gently to mix.
  3. Żrieragħ tal-Pjanti: Place one or two seeds into each grow sponge. Insert the seeded sponges into the plant pods. Place the pods into the designated holes on the system base. For optimal germination, cover each pod with a clear dome.
  4. Initial Light Adjustment: Position the LED grow light panel approximately 4-6 inches above the plant pods.
Diagram showing the hydroponic water circulation system and nutrient addition

Figure 3: Illustration of the hydroponic circulation system and nutrient application.

4. Istruzzjonijiet Operattivi

The system features smart modes for lighting and water circulation.

4.1. LED Grow Light Modes

The 24-Watt LED lights simulate the sunlight spectrum. Select the appropriate mode based on plant growth stage:

  • MODA NORMALI: 14 hours on, 10 hours off. Uses red, blue, and white LED lights. Suitable for sprouts, seedlings, and young plants.
  • GROW MODE: 16 hours on, 8 hours off. Uses red and white LED lights. Ideal for growing plants.
  • ENJOY MODE: 12 hours on, 12 hours off. Uses 50% red and white LED lights. Good for grown plants and flowering stages. Lights will be less intense in this mode.
Diagram illustrating the three light modes: Normal, Enjoy, and Grow with their respective on/off cycles

Figura 4: Aktarview of the automatic on/off light cycles for different growth stages.

4.2. Water Pump Circulation Modes

The water pump ensures oxygenation of the water.

  • Modalità Normali: The water pump operates for 5 minutes and pauses for 30 minutes.
  • Modalità Sleep: To activate, long-press the "PUMP SWITCH" button for 5 seconds. The pump will turn off for 12 hours and then resume its normal cycle. This mode is useful for reducing noise during rest periods.

4.3. Aġġustament tal-Għoli

The height of the LED grow light panel is adjustable to accommodate plants at different growth stages. Raise the light as plants grow to maintain the optimal distance (typically 4-6 inches above the tallest plant).

Image showing the adjustable lamp pole with minimum and maximum height indications

Figure 5: The adjustable lamp pole allows for varying plant heights up to 16 inches.

5. Manutenzjoni

Regular maintenance ensures healthy plant growth and system longevity.

  • Livell tal-Ilma: Monitor the water level regularly. Refill the tank with fresh water when the level is low.
  • Nutrient Replenishment: Add nutrient solutions according to the plant's needs and the manufacturer's recommendations (typically every 1-2 weeks or with water refills).
  • Tindif: Periodically clean the water tank and pump to prevent algae buildup and ensure optimal performance. Disconnect power before cleaning.

6 Issolvi l-problemi

Kwistjonijiet komuni u s-soluzzjonijiet tagħhom:

  • Seeds Not Germinating: Ensure proper temperature, adequate moisture (use dome covers), and fresh seeds. Some seeds may require soaking before planting.
  • Slow Growth: Check nutrient levels and light distance. Ensure the correct light mode is selected for the plant's stage.
  • Tkabbir tal-Alka: This can occur due to excessive light exposure to the water or high nutrient levels. Ensure pods are covered and clean the tank regularly.
  • Leaves Burning/Leggy Plants: Adjust the height of the grow light. If leaves are burning, the light is too close. If plants are leggy (stretching), the light is too far away.
  • Ħsara fil-Pompa tal-Ilma: Check for blockages in the pump or tubing. Ensure the pump is properly connected and the water level is sufficient.

7. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
BrandiDOO
Numru tal-MudellID-IG201
Wattage24 watt
Number of Plant Pods7
Max Plant HeightUp to 13.4 inches (as per feature bullets, image says 16 inches, using feature bullet info)
Tip ta' Sors tad-DawlLED (Red, Blue, White spectrum)
Water Pump Circulation5 mins on / 30 mins off (Normal Mode)
Metodu ta' KontrollTouch buttuni
Użu fuq ġewwa/barraĠewwa

8. Vidjo Uffiċjali tal-Prodott

Vidjo 1: Overview of the iDOO Indoor Herb Hydroponic System, demonstrating its features and ease of use.

9. Garanzija u Appoġġ

For warranty information, technical support, or replacement parts, please refer to the contact information provided with your product packaging or visit the official iDOO websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.

Dokumenti Relatati - ID-IG201

Preview Gwida għall-Installazzjoni tas-Sistema Idroponika LED ta' Ġewwa iDoo (Mudell: ID-IG201)
Gwida komprensiva għas-setup għas-Sistema Idroponika LED ta' ġewwa iDoo, Mudell ID-IG201. Tgħallem dwar il-komponenti inklużi, il-proċeduri ta' tħaddim, l-istruzzjonijiet tas-sigurtà, l-ispeċifikazzjonijiet, is-settings tal-pannell tal-kontroll, pariri dwar il-ġardinaġġ, is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija.
Preview Manwal tal-Utent tal-Kit tal-Ġardinaġġ ta' Ġewwa iDOO
Manwal komprensiv għall-utent għall-iDOO Indoor Gardening Kit (Mudell: ID-01), li jkopri s-setup, it-tħaddim, il-manutenzjoni, u pariri għal ġardinaġġ idroponiku ta' ġewwa b'suċċess.
Preview Manwal tal-Utent tas-Sistema Idroponika LED Intelliġenti ta' Ġewwa iDOO
Manwal tal-utent għas-Sistema Idroponika LED Intelliġenti ta' ġewwa iDOO, Mudell ID-IG301S. Jinkludi struzzjonijiet dwar is-sigurtà, tagħrif dwar il-prodottview, speċifikazzjonijiet, kontenut tal-pakkett, installazzjoni, tħaddim, struzzjonijiet tal-app, manutenzjoni tal-prodott, u FAQs.
Preview iDoo ID-EM002 Mopp Elettriku Spin mingħajr Fili b'ħafna Funzjonijiet: Manwal tal-Utent u Speċifikazzjonijiet
Manwal komprensiv għall-utent u speċifikazzjonijiet għall-mopp elettriku mingħajr fili iDoo ID-EM002, li jinkludi funzjonijiet ta' sprejer u xama'. Jinkludi informazzjoni dwar l-installazzjoni, it-tħaddim, is-soluzzjoni tal-problemi, u s-servizz tal-konsumatur.
Preview Manwal tal-Utent tal-Idoo Space Heater (Mudell IH-03)
Manwal komprensiv għall-utent għall-iDOO Space Heater (Mudell IH-03), li jkopri struzzjonijiet essenzjali ta' sigurtà, speċifikazzjonijiet tal-prodott, gwidi dettaljati dwar l-operazzjoni għall-pannell tal-kontroll u r-remote, proċeduri ta' tindif u manutenzjoni, pariri dwar is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija. Tgħallem kif tuża l-iDOO heater tiegħek b'mod sigur u effettiv.
Preview Manwal tal-Utent tal-Heater Spazjali taċ-Ċeramika iDOO - Qawwa (Mudell IC-027)
Manwal komprensiv għall-utent għall-iDOO Ceramic Space Heater - Power, mudell IC-027. Jinkludi struzzjonijiet dwar is-sigurtà, speċifikazzjonijiet tal-prodott, gwida għat-tħaddim, kif ukoll informazzjoni dwar is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija.