Marmitek Bell ME BLK Wireless Chime for Buzz LO

Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your Marmitek Bell ME BLK Wireless Chime. Please read these instructions carefully before using the product to ensure optimal performance and safety. The Bell ME BLK is designed to work exclusively with the Marmitek Buzz LO video doorbell system.

Informazzjoni dwar is-Sigurtà

• Żomm l-apparat 'il bogħod mill-ilma u l-umdità.
• Tesponix l-apparat għal temperaturi estremi jew dawl tax-xemx dirett.
• Tippruvax tiftaħ jew issewwi l-apparat int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
• Use only the specified battery type (3x AA batteries). Ensure correct polarity when inserting batteries.
• Armi l-batteriji użati b'mod responsabbli skont ir-regolamenti lokali.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• 1x Marmitek Bell ME BLK Wireless Chime
• Manwal ta 'Istruzzjoni (dan id-dokument)

Note: 3x AA batteries are required but not included in the package.

Image: The retail packaging for the Marmitek Bell ME BLK wireless chime, showing the product name and key features.

Prodott Overview

The Marmitek Bell ME BLK is a compact, battery-operated wireless chime designed to extend the audible notification of your Marmitek Buzz LO video doorbell. It allows you to hear the doorbell ring from various locations within your home, garden, or attic, ensuring you never miss a visitor.

Immaġni: Quddiem view of the Marmitek Bell ME BLK wireless chime, showcasing its minimalist design and speaker grille.

Immaġni: Ġenb view of the Marmitek Bell ME BLK wireless chime, highlighting the control buttons for settings.

Setup

1. Installazzjoni tal-batterija

1. Locate the battery compartment on the back of the Bell ME BLK chime.
2. Iftaħ l-għatu tal-kompartiment tal-batterija.
3. Daħħal 3 batteriji AA, waqt li tiżgura l-polarità korretta (+/-) kif indikat ġewwa l-kompartiment.
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

2. Pairing with Marmitek Buzz LO Video Doorbell

The Bell ME BLK chime must be paired with your Marmitek Buzz LO video doorbell to function.

1. Ensure your Buzz LO video doorbell is powered on and configured.
2. On the Bell ME BLK chime, press and hold the pairing button (refer to the product diagram for location, usually a small button on the side or back) until an indicator light flashes or a sound confirms pairing mode.
3. Initiate the pairing process on your Buzz LO video doorbell or its associated mobile application, following the instructions provided with your Buzz LO.
4. Once successfully paired, the Bell ME BLK chime will emit a confirmation sound or its indicator light will become solid.
5. Test the connection by pressing your Buzz LO doorbell button. The Bell ME BLK chime should ring.

Note: You can connect multiple Bell ME chimes to a single Buzz LO doorbell, and multiple Buzz LO doorbells to a single Bell ME chime.

Operating the Chime

Aġġustament tal-Volum

The Bell ME BLK chime features adjustable volume settings. Locate the volume control buttons on the side of the device (refer to product image 2). Press the '+' button to increase volume and the '-' button to decrease volume.

Chime Melodies

The device offers several chime melodies. To change the melody, press the melody selection button (usually located near the volume buttons). Each press will cycle through the available melodies. Select the desired melody by stopping on it.

Firxa Wireless

The Bell ME BLK operates on a 433 MHz frequency with a maximum range of 80 meters (approximately 262 feet) in open areas. Environmental factors such as walls, floors, and other electronic devices may reduce the effective range. Position the chime strategically for optimal reception.

Manutenzjoni

Sostituzzjoni tal-batterija

When the chime's sound becomes weak or the indicator light signals low battery, it's time to replace the batteries. Follow the battery installation steps in the "Setup" section. Always replace all three AA batteries at the same time with new ones.

Tindif

To clean the Bell ME BLK chime, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the device. Ensure the device is dry before re-inserting batteries or operating.

Issolvi l-problemi

• Chime does not ring:
  • Iċċekkja jekk il-batteriji humiex imdaħħla sew u mhux eżawriti. Ibdel jekk meħtieġ.
  • Ensure the chime is properly paired with the Buzz LO video doorbell. Repeat pairing steps if needed.
  • Verify that the Buzz LO doorbell is functioning correctly.
  • Check the distance between the chime and the Buzz LO. Reduce distance if they are too far apart.
• Ħoss baxx jew distort:
  • Ibdel il-batteriji b'oħrajn ġodda.
  • Adjust the volume using the '+' button.
  • Ensure there are no obstructions blocking the speaker grille.
• Chime rings intermittently:
  • This could indicate low battery. Replace batteries.
  • Interference from other wireless devices might be occurring. Try repositioning the chime.
  • The chime might be at the edge of its wireless range. Move it closer to the Buzz LO.

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

For warranty details and terms, please refer to the warranty card included with your purchase or visit the official Marmitek websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Appoġġ għall-Klijent

If you encounter any issues or have questions not covered in this manual, please contact Marmitek customer support. Contact information can typically be found on the Marmitek webis-sit jew fuq l-imballaġġ tal-prodott.

Websit: www.marmitek.com