Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your KING K901-B Hoot WiFi Line Voltage Smart Programmable Thermostat. This device is designed to provide precise temperature control for electric heating systems, including baseboard, fan-forced, and radiant electric heaters, with the added convenience of WiFi connectivity for remote management.
Jekk jogħġbok aqra dan il-manwal bir-reqqa qabel l-installazzjoni u l-użu biex tiżgura l-funzjonament xieraq u s-sigurtà.
Informazzjoni dwar is-Sigurtà
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi lokali u nazzjonali.
- Always turn off power at the circuit breaker before installing or servicing the thermostat.
- This thermostat is designed for line voltage electric heating systems (120V/208V/240V, Single Pole, 3-Wire). Do not use with low voltage systems (e.g., furnaces, central air conditioners).
- Ensure all wiring connections are secure to prevent electrical hazards.
- Tesponix it-termostat għall-ilma jew għal umdità eċċessiva.
Kontenut tal-Pakkett
- KING K901-B Hoot WiFi Thermostat
- Viti tal-Immuntar
- Wajer Ġewż
- Manwal għall-Utent (dan id-dokument)
Installazzjoni
Għodod Meħtieġa:
- Tornavit (Phillips u Flathead)
- Strippers tal-Wajer
- Voltage Tester
Wiring Instructions (Single Pole, 3-Wire):
- Itfi l-Enerġija: Locate the circuit breaker controlling your heating system and turn it OFF. Verify power is off using a voltagtester.
- Neħħi Termostat Qadim: Carefully remove your existing thermostat from the wall. Disconnect the wires, noting their connections.
- Identifika l-Wajers: For a single pole, 3-wire installation, you will typically have two line wires (L1, L2 from the power source) and one load wire (to the heater). Consult your existing thermostat's wiring or a qualified electrician if unsure.
- Connect New Thermostat:
- Connect the two line wires (L1, L2) from the power source to the thermostat's designated line terminals.
- Connect the load wire to the thermostat's designated load terminal.
- Kun żgur li l-konnessjonijiet kollha huma siguri bl-użu ta' ġewż tal-wajer.
- Termostat tal-Immuntar: Secure the thermostat to the wall using the provided mounting screws.
- Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker.
Nota: Incorrect wiring can damage the thermostat or heating system and pose a fire hazard. If you are not comfortable with electrical wiring, please consult a licensed electrician.
Image: The KING K901-B Hoot WiFi Thermostat display, showing the current temperature and set point, alongside the Hoot logo and icons for downloading the app from the App Store and Google Play.
Setup: Hoot Smart Phone App & WiFi Connection
The Hoot thermostat connects to your home WiFi network (2.4GHz only) to enable remote control and programming via the Hoot smartphone app.
- Niżżel l-App: Fittex għal "Hoot Smart Comfort Control" in the Apple App Store or Google Play Store and install it on your smartphone.
- Oħloq Kont: Open the Hoot app and follow the on-screen instructions to create a new user account or log in if you already have one.
- Żid Apparat: Fl-app, agħżel l-għażla li żżid apparat ġdid.
- Thermostat Pairing Mode: On the thermostat, follow the instructions to put it into WiFi pairing mode. This usually involves holding a specific button or navigating through a menu. The thermostat display will indicate when it's ready to connect.
- Qabbad mal-WiFi: In the Hoot app, select your 2.4GHz home WiFi network and enter the password. The app will guide you through the connection process.
- Konferma: Once connected, the thermostat display will show a WiFi icon, and the app will confirm successful pairing.
Importanti: The Hoot thermostat only supports 2.4GHz WiFi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the setup process.
Vidjo: Overview of the Hoot WiFi Thermostat, demonstrating its features and app connectivity for smart comfort control. This video highlights how the thermostat can be managed remotely and programmed for various schedules.
Istruzzjonijiet Operattivi
Manual Operation (Touchscreen):
- Aġġusta tat-Temperatura: Uża l-Up (^) u Down (v) arrows on the touchscreen to increase or decrease the set temperature.
- Power On/Off: Agħfas il-buttuna tal-enerġija (⏻) to turn the heating system on or off.
- Għażla tal-Modalità: The thermostat may offer different modes (e.g., Heat, Off). Refer to the on-screen icons for selection.
- Skeda Skadenza: Manually adjusting the temperature will temporarily override any active schedule. The override duration can often be set or will revert at the next scheduled event.
App Operation (Hoot Smart Comfort Control):
- Remote Temperature Control: Adjust the temperature from anywhere using the Hoot app on your smartphone.
- Skedi ta' Programmazzjoni:
- Create custom heating schedules with up to 4 or 6 time periods per day for maximum flexibility.
- Set different schedules for weekdays and weekends, or customize each day individually.
- Funzjoni ta' Żomm: Use the "Hold" feature to maintain a specific temperature indefinitely, overriding the schedule until manually released.
- Modalità Vacation: Set a specific temperature for an extended period when you are away, saving energy.
- User Defined Max Temperature Lock: Set a maximum temperature limit to prevent overheating or unauthorized adjustments.
Manutenzjoni
- Tindif: Gently wipe the thermostat screen and body with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
- Aġġornamenti tal-Firmware: The thermostat supports Over-The-Air (OTA) firmware upgrades. The Hoot app will notify you if an update is available. Follow the app's instructions to ensure your thermostat has the latest features and improvements.
- Batterija (jekk applikabbli): Din il-linja voltage thermostat does not typically require batteries for operation, as it draws power directly from the heating circuit.
Issolvi l-problemi
- Thermostat Not Powering On:
- Iċċekkja s-circuit breaker u kun żgur li hu mixgħul.
- Iċċekkja li l-konnessjonijiet tal-wajers kollha huma siguri u korretti.
- Ebda Ħruġ tas-Sħana:
- Kun żgur li t-termostat huwa ssettjat għal temperatura ogħla mit-temperatura attwali tal-kamra.
- Check if the thermostat is in "Off" mode or "Vacation" mode.
- Verify the heating system itself is functioning correctly.
- Kwistjonijiet ta' Konnessjoni WiFi:
- Confirm your router is broadcasting a 2.4GHz network.
- Ensure your smartphone is connected to the 2.4GHz network during setup.
- Move the thermostat closer to the WiFi router if possible, or consider a WiFi extender.
- Restart your router and the thermostat (by cycling power at the breaker).
- Re-attempt the WiFi pairing process through the Hoot app.
- Qari tat-Temperatura Mhux Preċiż:
- Kun żgur li t-termostat ma jkunx espost għax-xemx diretta, kurrenti tal-arja, jew sorsi tas-sħana (eż., lamps, apparat) li jistgħu jaffettwaw is-senser tiegħu.
- The thermostat uses an electronic thermistor for accurate control (±1°F).
- L-iskrin tat-touchscreen ma jirrispondix:
- Try cycling power to the thermostat at the circuit breaker to reset it.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | RE |
| Isem tal-Mudell | King Electric Hoot WiFi Line V |
| Numru tal-Mudell | K901-B |
| Voltage | 120V / 208V / 240V |
| Tip ta 'Wiring | Single Pole, 3-Wire |
| Konnettività | Wi-Fi (2.4GHz) |
| Firxa tat-Temperatura | 41°F - 90°F (5°C - 32°C) |
| Tip ta' Kontroll tat-Temperatura | Programmable, Electronic Sensing with Thermistor (±1°F) |
| Tip ta 'Wiri | Large LCD Touchscreen (4 Inches) |
| Metodu ta' Kontroll | Mess, App |
| Karatteristiċi Speċjali | Programmable with Hoot App, OTA Firmware Upgradeable, User Defined Max Temperature Lock |
| Compatible Heaters | Baseboard, Fan Forced & Radiant Electric Heaters |
| Materjal | Plastik |
| Dimensjonijiet | 10 x 10 x 10 pulzieri (Dimensjonijiet tal-Prodott) |
| Piż tal-oġġett | 10.3 uqija |
| Ċertifikazzjoni | ETL Elenkat |
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official KING website or contact KING customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manifattur: Re Elettriku
Websit: www.king-electric.com (Eżampil-link, il-link attwali jista' jvarja)
