Reality Vigo LED Ceiling Light R62055131 Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe installation, operation, and maintenance of your Reality Vigo LED Ceiling Light, model R62055131. Please read these instructions carefully before proceeding with installation or use, and retain them for future reference.

The Reality Vigo LED Ceiling Light features an integrated 24-watt LED, providing 2800 lumens of warm white light at 3000 Kelvin. Its unique design incorporates a switch dimmer function, allowing for brightness adjustment using a standard wall switch.

Image 1.1: The Reality Vigo LED Ceiling Light (R62055131) featuring a modern, hexagonal design in a room setting.

2. Istruzzjonijiet tas-Sigurtà

• Installazzjoni Elettrika: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Always disconnect the main power supply before beginning any installation, maintenance, or repair work.
• Voltage: Tiżgura l-voltage supply matches the requirements specified on the product label.
• Klassifikazzjoni IP20: This fixture is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Sħana: Do not cover the fixture with insulating material. Ensure adequate ventilation around the fixture.
• Sors tad-Dawl: The LED light source in this product is not replaceable. When the light source reaches its end of life, the entire luminaire must be replaced.
• Tindif: Skonnettja l-provvista tal-enerġija qabel it-tindif. Uża drapp artab u niexef. Tużax prodotti tat-tindif jew solventi li joborxu.

3. Kontenut tal-Pakkett

Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact your retailer.

• Reality Vigo LED Ceiling Light Fixture (R62055131)
• Mounting Material (screws, wall plugs, etc.)
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Setup u Installazzjoni

Installazzjoni professjonali minn elettriċista kwalifikat hija rakkomandata ħafna.

1. Ipprepara għall-Installazzjoni: Turn off the main power supply at the circuit breaker before starting. Ensure the power cannot be accidentally reconnected.
2. Immarka l-Punti tal-Immuntar: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the ceiling. Refer to the technical drawing for dimensions.
3. Drill toqob: Drill holes at the marked positions suitable for the provided wall plugs and screws. Insert the wall plugs.
4. Immonta l-Bracket: Secure the mounting bracket to the ceiling using the screws.
5. Konnessjoni Elettrika: Connect the electrical wires from the ceiling to the terminal block on the fixture. Ensure correct polarity (Live, Neutral, Earth) as per local wiring regulations. Double-check all connections for security.
6. Waħħal l-Apparat: Carefully attach the light fixture to the mounted bracket, ensuring it is securely fastened.
7. Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' daħħal l-enerġija fis-circuit breaker.

Image 4.1: Technical drawing showing the dimensions (L: 90cm, W: 30cm, H: 15cm) and mounting details of the Reality Vigo LED Ceiling Light.

5. Istruzzjonijiet Operattivi

The Reality Vigo LED Ceiling Light features an integrated 'Switch Dimmer' function, allowing you to adjust the brightness using your existing standard wall switch. No external dimmer is required.

To operate the dimmer function:

• 100% Luminożità: Turn the light ON. If it's already on, turn it OFF and then ON again once.
• 50% Luminożità: Turn the light OFF and then ON twice in quick succession.
• 25% Luminożità: Turn the light OFF and then ON three times in quick succession.

The light will cycle through these brightness levels each time you perform the quick ON/OFF sequence. To return to 100% brightness, simply turn the light OFF and then ON once.

Image 5.1: Visual guide for the integrated Switch Dimmer function, demonstrating how to achieve 100%, 50%, and 25% light output using a standard wall switch.

For more information on the Switch Dimmer technology, you may visit www.trio-lighting.com/switchdimmer.

6. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tad-dawl tas-saqaf tiegħek.

• Tindif: Before cleaning, always disconnect the power supply. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Spezzjoni: Iċċekkja l-apparat tad-dawl perjodikament għal xi sinjali ta’ ħsara, konnessjonijiet maħlula, jew xedd u kedd. Jekk issib xi problemi, skonnettja l-provvista tal-enerġija u kkonsulta elettriċista kwalifikat.

7 Issolvi l-problemi

If your Reality Vigo LED Ceiling Light is not functioning correctly, consider the following common issues before contacting support:

• Id-dawl ma jixgħelx:
  • Check if the main power supply is ON at the circuit breaker.
  • Ensure the wall switch is in the ON position.
  • Verify that the electrical connections are secure (consult a qualified electrician if unsure).
• Id-dawl jitteptep jew jitbaxxa b'mod mhux mistenni:
  • Kun żgur li l-provvista tal-enerġija hija stabbli.
  • Iċċekkja għal konnessjonijiet tal-wajers laxki.
  • Confirm that no external dimmer is being used, as this fixture has an integrated switch dimmer.
• Dimmer function is not working:
  • Ensure you are performing the ON/OFF sequence quickly enough for the dimmer to register.
  • Try resetting the light by turning off the main power for a few minutes and then turning it back on.

If these steps do not resolve the issue, please contact your retailer or a qualified electrician.

8. Speċifikazzjonijiet

Image 8.1: Energy efficiency label for the Reality Vigo LED Ceiling Light, indicating class F.

9. Garanzija u Appoġġ

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. If you encounter any issues or require technical assistance, please contact the retailer where you purchased the product or the manufacturer's customer support.

Please have your model number (R62055131) and proof of purchase ready when contacting support.