Manwal tal-Istruzzjonijiet tas-Subwoofer Imħaddem minn Magnadyne LS-SUB-200 ta' 8 pulzieri

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your Magnadyne LS-SUB-200 8-inch Powered Subwoofer. Please read this manual thoroughly before attempting to install or operate the unit to ensure optimal performance and safety. Keep this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

Osserva l-prekawzjonijiet ta' sigurtà li ġejjin waqt l-installazzjoni u t-tħaddim:

• Sigurtà Elettrika: Always disconnect the vehicle's battery negative terminal before beginning any electrical work. Ensure all wiring is correctly connected to prevent short circuits or damage.
• Sors tal-Enerġija: This unit is designed for 12V DC automotive electrical systems. Do not attempt to connect it to other power sources.
• Ventilazzjoni: Ensure the subwoofer is installed in a location that allows for adequate ventilation to prevent overheating.
• Immuntar: Waħħal is-subwoofer sew biex tevita li jiċċaqlaq waqt il-moviment tal-vettura, li jista' jikkawża korriment jew ħsara.
• Propożizzjoni 65 Twissija: Dan il-prodott jista 'jkun fih kimiċi magħrufa mill-Istat ta' Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti meta tiftaħ il-pakkett:

• Magnadyne LS-SUB-200 8-inch Powered Subwoofer (Carbon Fiber Speaker Enclosure)
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Prodott Aktarview

The Magnadyne LS-SUB-200 is an 8-inch powered subwoofer designed to deliver deep, impactful bass in vehicles. It features a compact, ported enclosure and integrated amplification for easy installation and powerful performance.

Karatteristiċi ewlenin:

• Output tal-Enerġija: 320 Watts Maximum Power, 80 Watts RMS @ 4 ohms (14.4VDC)
• Woofer: High-quality 8-inch woofer with IMPP cone
• Mehmużin: Solid wood ported enclosure for enhanced bass response
• Konnettività: RCA line input with variable input level adjustment
• Dimensjonijiet: 19-il pulzier (L) x 6.5-il pulzier (W) x 9.5-il pulzier (H)

Tqassim tal-Panew tal-Kontroll:

The control panel is located on the rear of the subwoofer, providing access to all necessary adjustments and connections.

Stampa 4.1: Close-up view of the control panel on the Magnadyne LS-SUB-200 subwoofer, showing input level, bass frequency, speaker phase controls, RCA inputs, power/protect LED, fuse, and power terminals.

• 1. Input Level (Min/Max): Adjusts the input sensitivity to match the output level of your head unit.
• 2. Bass Freq (50Hz-250Hz): Controls the low-pass filter frequency. Frequencies above this setting will be attenuated.
• 3. Spk Phase (Norm/180°): Selects the phase of the subwoofer output. Use 180° if the bass sounds weak or out of phase with other speakers.
• 4. Line Input (R/L RCA): Connects to the RCA pre-out jacks of your head unit.
• 5. Power / Protect LED: Illuminates green when powered on, red if the amplifier huwa fil-mod ta 'protezzjoni.
• 6. 20A Fuse: Jipproteġi l- amplifier from electrical overloads. Replace only with a fuse of the same rating.
• 7. +12V Terminal: Connects to the vehicle's positive battery terminal.
• 8. REM Terminal: Connects to the remote turn-on lead from your head unit.
• 9. GND Terminal: Connects to a solid chassis ground point on the vehicle.

5. Installazzjoni

Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any steps, consult a professional installer.

5.1 Tqegħid

Choose a location that provides adequate space for the subwoofer and allows for proper ventilation. Common locations include the trunk of a car, under a seat (if space permits), or in the cargo area of an SUV or RV.

Stampa 5.1: Magnadyne LS-SUB-200 subwoofer installed in the trunk of a vehicle.

Stampa 5.2: Magnadyne LS-SUB-200 subwoofer positioned in a vehicle's cargo area.

5.2 Konnessjonijiet tal-Wiring

Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati biex jipprevjenu short circuits.

1. Qawwa (+12V): Connect the +12V terminal of the subwoofer to the positive terminal of the vehicle's battery. Use a minimum of 10 AWG wire for this connection. Install an in-line fuse (not included, typically 20A) within 18 inches of the battery.
2. Art (GND): Connect the GND terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection. Use a minimum of 10 AWG wire, keeping the length as short as possible.
3. Tixgħel mill-Bogħod (REM): Connect the REM terminal to the remote turn-on output of your head unit. This wire signals the subwoofer to turn on and off with your vehicle's audio system.
4. Audio Input (RCA Line Input): Connect the RCA line inputs (R and L) from the subwoofer to the RCA pre-out jacks of your head unit. If your head unit does not have RCA pre-outs, a line output converter (not included) may be required.

Note: Battery and ground wires must be 10AWG for proper performance.

6. Operazzjoni

Once installed, you can adjust the subwoofer's settings to optimize its performance with your vehicle's audio system.

6.1 Qawwa Inizjali

After all connections are made, reconnect the vehicle's battery. Turn on your head unit. The Power LED on the subwoofer's control panel should illuminate green, indicating it is receiving power and operating correctly.

6.2 Aġġustament tal-Kontrolli

• Livell ta' Input: Start with the Input Level control set to minimum. Play a familiar piece of music with strong bass. Slowly increase the Input Level until the bass sounds balanced with the rest of your audio system, without distortion.
• Bass Freq (Low Pass Filter): Adjust the Bass Freq control to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80-100Hz. If your main speakers are small, you might set it higher; if they are large, you might set it lower.
• Fażi tal-Ispeaker: Listen to the bass response from your normal listening position. Toggle the Spk Phase switch between 'Norm' and '180°'. Choose the setting that provides the strongest and most impactful bass. This corrects any phase cancellation issues between the subwoofer and your main speakers.

7. Manutenzjoni

The Magnadyne LS-SUB-200 subwoofer requires minimal maintenance.

• Tindif: Use a soft, dry cloth to wipe down the enclosure. Do not use harsh chemicals or abrasive cleaners.
• Konnessjonijiet: Iċċekkja l-konnessjonijiet kollha tal-wajers perjodikament biex tiżgura li jibqgħu sikuri u ħielsa mill-korrużjoni.
• Sostituzzjoni tal-fjus: If the subwoofer stops working and the Protect LED is off, check the 20A fuse. If blown, replace it only with a fuse of the exact same rating (20A). Using a higher-rated fuse can cause serious damage.

8 Issolvi l-problemi

Jekk tesperjenza problemi bis-subwoofer tiegħek, irreferi għall-gwida għas-soluzzjoni tal-problemi li ġejja:

9. Speċifikazzjonijiet

Technical specifications for the Magnadyne LS-SUB-200 Powered Subwoofer:

Stampa 9.1: Diagram illustrating the dimensions of the Magnadyne LS-SUB-200 powered subwoofer (19" L x 6.5" W x 9.5" H).

10. Garanzija u Appoġġ

Magnadyne products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Magnadyne websit.

For technical support or service inquiries, please contact Magnadyne customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.