Introduzzjoni
Thank you for choosing the Apace Vision XPRO-LUME Bike Lights. This comprehensive set includes a powerful 500-lumen USB rechargeable front light and a bright rear light, designed to enhance your visibility and safety during cycling. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new bike lights to ensure optimal performance and longevity.
Image: The Apace Vision XPRO-LUME Bike Lights set, featuring the black front headlight with a bright beam and the red rear taillight, both showing water droplets, indicating their waterproof design.
Informazzjoni dwar is-Sigurtà
- Dejjem kun żgur li d-dwal huma mwaħħla sew qabel ma ssuq.
- Do not look directly into the front light beam to avoid temporary vision impairment.
- Clean lights with a soft, damp drapp. Evita cleaners li joborxu.
- Aħżen id-dwal f'post frisk u niexef meta ma tkunx qed tużahom.
- Ensure USB charging port covers are properly sealed to maintain water resistance.
Kontenut tal-Pakkett
- Apace Vision XPRO-LUME Front Bike Light (500 Lumens)
- Apace Vision Rear Bike Light (50 Lumens)
- USB-C Charging Cable (for Front Light)
- Micro USB Charging Cable (for Rear Light)
- Handlebar Mount for Front Light
- Silicone Strap Mount for Rear Light
- Manwal għall-Utent
Prodott Overview
Immaġni: Dettaljata view of the Apace Vision front bike light, highlighting its power button, battery life indicator, USB-C charging port, optical lens, and detachable mount.
Image: The Apace Vision rear bike light, showcasing its IPX3 waterproof rating, 50 lumens brightness, 4-12 hour battery life, and USB recharge capability.
The XPRO-LUME front light features a robust design with a premium CREE XPG3 LED, offering 500 lumens of brightness. It is equipped with a USB Type-C charging port and a multi-segment battery life indicator. The rear light provides 50 lumens and is also USB rechargeable. Both lights are designed for durability and weather resistance.
Setup
Iċċarġjar tad-Dwal
Before first use, fully charge both the front and rear lights. Connect the appropriate USB cable to the charging port on each light and plug the other end into a USB power source (e.g., computer, wall adapter). The front light's battery indicator will show charging status. The rear light typically has an indicator that changes color when fully charged.
Mounting the Front Light
- L-Ewwel Pass: Place the handlebar mount on your bicycle's handlebar.
- It-Tieni Pass: Secure the mount by tightening the screw or strap mechanism. Ensure it is firm and does not rotate easily.
- It-Tielet Pass: Slide the front light onto the mount until it clicks securely into place.
- Pass Erbgħa: Adjust the light angle as needed. The mount allows for 360-degree swivel adjustment for optimal beam direction.
Image: A visual guide demonstrating the four steps for easy installation of the Apace Vision front bike light onto a bicycle handlebar.
Mounting the Rear Light
The rear light uses a flexible silicone strap mount. Wrap the strap around your seat post or other suitable bicycle frame part and hook it securely. Ensure the light faces directly backward for maximum visibility.
Istruzzjonijiet Operattivi
Front Light Operation
To turn the front light ON/OFF, press and hold the power button for 1 second. To cycle through the lighting modes, short press the power button. The front light features five lighting modes:
- Għoli: 500 Lumens, approx. 3 hours runtime
- Nofs: 300 Lumens, approx. 6 hours runtime
- Baxx: 100 Lumens, approx. 10 hours runtime
- Strobe 500 Lumens, approx. 10 hours runtime
- Daytime Flash: 500 Lumens, approx. 26 hours runtime
Image: A table illustrating the five distinct lighting modes of the Apace Vision bike light, detailing their respective lumen outputs and approximate running times.
Battery Life Indicator (Front Light)
The front light has three blue LED indicators to show battery status:
- Iċċarġjar: Aħmar (Teptip)
- 61-100%: Three blue dots
- 31-60%: Two blue dots
- 11-30%: One blue dot
- 0-10%: One blue dot (Flashing)
Image: A diagram detailing the location of the power button and the visual representation of the battery life indicator on the Apace Vision front bike light.
Rear Light Operation
The rear light typically has a single button for operation. Press the button to turn it on and cycle through its various modes (e.g., steady, flashing, pulse). Press and hold to turn it off. Refer to the specific instructions included with the rear light for detailed mode information.
Manutenzjoni
Tindif
Imsaħ id-dwal b'ċarruta ratba, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the casing jew lenti.
Ħażna
When not in use for extended periods, store the lights in a cool, dry place. It is recommended to charge the lights every 3-6 months to maintain battery health.
Kura tal-batterija
To maximize battery lifespan, avoid fully discharging the lights frequently. Recharge them when the battery indicator shows low power. Use only the provided or compatible USB charging cables.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Il-batterija hija eżawrita. | Iċċarġja d-dawl kompletament. |
| Id-dawl ma jiċċarġjax. | Kejbil jew sors tal-enerġija difettuż. | Ipprova kejbil USB jew adapter tal-enerġija differenti. Kun żgur li l-port tal-iċċarġjar ikun nadif u ħieles minn debris. |
| Id-dawl jitteptep jew jintefa b'mod mhux mistenni. | Batterija baxxa jew konnessjoni maħlula. | Recharge the battery. Ensure the light is securely seated in its mount. |
| Light falls off mount. | Mount not secured or light not clicked in properly. | Re-secure the mount tightly. Ensure the light clicks firmly into place. |
Speċifikazzjonijiet
- Ditta: Viżjoni Apace
- Isem tal-Mudell: UI-BHL-109
- Front Light Brightness: 500 Lumens
- Rear Light Brightness: 50 Lumens
- Front Light Battery Life: Up to 26 hours (Daytime Flash mode)
- Rear Light Battery Life: 4-12 siegħa (skont il-modalità)
- Livell ta' Reżistenza għall-Ilma: IPX5 (Front Light), IPX3 (Rear Light)
- Sors tal-Enerġija: Li jaħdem bil-batterija (USB Rechargeable)
- Materjal: Plastik
- Tip ta 'Immuntar: Handlebar Mount (Front), Silicone Strap (Rear)
- Piż tal-oġġett: 0.24 Kilograms (combined)
Image: Key features of the Apace Vision bike light, including battery life, lumen output, waterproof rating, number of lighting modes, and USB recharge capability.
Garanzija u Appoġġ
Apace Vision products are backed by a year-long warranty. For warranty claims, technical support, or any inquiries regarding your XPRO-LUME Bike Lights, please contact Apace Vision customer service through the retailer's platform or visit the official Apace Vision website for contact information. Please retain your proof of purchase for warranty validation.
