Manwal tal-Utent tal-Arloġġ Intelliġenti Awtomatiku Sharp Digital Alarm b'AccuSet

Introduzzjoni

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Arloġġ tal-Allarm Diġitali Sharp, quddiem view, showing red LED display with time 12:08.

Figura 1: Quddiem view of the Sharp Digital Alarm Clock.

Karatteristiċi tal-Prodott

AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
High/Low Dimmer Control: Luminożità tal-wiri aġġustabbli.
Batterija ta' backup: Pre-installed CR2032 battery for time settings retention during power outages.
Għażla taż-Żona tal-Ħin: Easily select your local time zone.

Diagram showing key features of the Sharp Digital Alarm Clock: Large 0.9 inch Red LED Display, AccuSet Automatic Time Setting, High & Low Display Dimmer Control, Easy Set Top Button Controls, and Installed Battery Backup.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Setup

1. Initial Power-Up and Time Zone Selection

Locate the time zone switch on the bottom of the clock.
Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

Biex taġġusta għall-Ħin tas-Sajf:

Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
For Standard Time, slide the switch to OFF to subtract one hour (-1 hr).

3. Backup tal-Batterija

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Istruzzjonijiet Operattivi

Fuq view of the Sharp Digital Alarm Clock showing button labels: DIMMER HI/LO, TIME SET, ALARM SET, SNOOZE, HOUR SET, MINUTE SET, ALARM ON/OFF. Also indicates PM indicator and ALARM indicator on the display.

Figure 3: Top panel controls and display indicators.

1. Issettjar tal-Allarm

Agħfas il- SET TA 'ALLARM button once. The alarm time will flash on the display.
Agħfas il- SIEGĦA SET button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
Agħfas il- MINUTI SET buttuna biex taġġusta l-minuta tal-allarm.
Agħfas il- SET TA 'ALLARM Agħfas il-buttuna mill-ġdid biex tikkonferma u toħroġ mill-modalità tas-settings tal-allarm.

2. Turning Alarm On/Off

Biex tixgħel l-allarm ON, agħfas il- ALLARM ON / OFF button. The alarm indicator light on the display will illuminate.
Biex tixgħel l-allarm OFF, agħfas il- ALLARM ON / OFF button again. The alarm indicator light will turn off.

3. Funzjoni Snooze

Meta jdoqq l-allarm, agħfas il-buttuna l-kbira SNOOZE buttuna li tinsab fuq nett tal-arloġġ. L-allarm jieqaf temporanjament u jerġa’ jdoqq wara madwar 9 minuti.

4. Dimmer Control

Biex taġġusta l-luminożità tal-wiri LED:

Agħfas il- DIMMER HI/LO button to toggle between high and low brightness settings.

Close-up view of the Sharp Digital Alarm Clock display, highlighting the high and low dimmer control feature.

Figure 4: Display brightness adjustment.

Manutenzjoni

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

Unplug the clock from the electrical outlet.
Locate the screw-secured battery compartment on the bottom of the clock.
Unscrew the compartment cover and carefully remove the old CR2032 battery.
Daħħal batterija CR2032 ġdida, filwaqt li tiżgura l-polarità korretta (+ in-naħa 'l fuq).
Erġa’ poġġi l-għatu tal-kompartiment u waħħalha bil-vit.
Plug the clock back into the electrical outlet.

Nota: Armi batteriji qodma b'mod responsabbli skont ir-regolamenti lokali.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
L-arloġġ jidher vojt.	Ebda qawwa.	Ensure the clock is securely plugged into a working electrical outlet. Check the power source.
Il-ħin mhux korrett.	Incorrect time zone selected; DST switch incorrect; Power interruption.	Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery.
L-allarm ma jdoqqx.	Alarm not activated; Incorrect alarm time set.	Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly.
Id-displej huwa qawwi wisq/mhux ċar.	Is-setting tad-dimmer jeħtieġ aġġustament.	Press the DIMMER HI/LO button to cycle through brightness settings.

Speċifikazzjonijiet

Ditta: Sharp
Mudell: B089ZMSR39
Kulur: Black-red Led
Tip ta' wiri: Diġitali
Karatteristika Speċjali: Auto Set
Dimensjonijiet tal-Prodott: 5.5"W x 2.6"Għ
Sors tal-Enerġija: Corded Elettriku
Batterija tal-Backup: 1 x CR2032 Jonju tal-Litju (inkluża)
Piż tal-oġġett: 10.2 uqija
UPC: 049353004426
Manifattur: Sharp

Diagram showing the dimensions of the Sharp Digital Alarm Clock: 5.5 inches wide, 2.6 inches high, and 2.45 inches deep. The display size is 0.9 inches.

Figura 5: Dimensjonijiet tal-prodott.

Informazzjoni Addizzjonali

For further assistance or product inquiries, please refer to the official Sharp websit jew ikkuntattja lill-appoġġ tal-klijenti tagħhom.

Dan il-prodott huwa ddisinjat għall-użu fuq ġewwa biss.

	SHARP Atomic Wall Clock: Setup, Features, and Manual Comprehensive instruction manual for the SHARP Radio Controlled Atomic Wall Clock (Model SPC876), covering setup, time zone settings, DST, signal reception, manual setting, and warranty information.
	Sharp Atomic Clock SPC1019 Instructions and Warranty User manual and warranty information for the Sharp Atomic Clock SPC1019, detailing setup, time setting, alarm functions, and troubleshooting.
	SHARP SPC971 Atomic Wall Clock User Manual and Instructions Detailed instructions and safety information for the SHARP SPC971 Atomic Wall Clock, covering setup, battery replacement, and operation.
	Sharp SPC1003/1005 Atomic Weather Station User Manual Comprehensive guide for the Sharp SPC1003/1005 Atomic Weather Station, detailing features, setup, controls, and specifications for accurate time, weather, and environmental monitoring.
	Arloġġ tal-Ħajt Atomiku Sharp SPC971: Istruzzjonijiet u Garanzija Manwal tal-utent u informazzjoni dwar il-garanzija għall-Arloġġ tal-Ħajt Atomiku Sharp (Mudell SPC971), li jiddettalja s-setup, il-karatteristiċi, u garanzija limitata ta' sena.
	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds: User Guide Comprehensive guide to operating the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.

Sharp B089ZMSR39