Arloġġ tal-Allarm Diġitali Sharp b'LEDs Ħomor - Manwal tal-Istruzzjonijiet tal-Mudell SPC387

Introduzzjoni

This manual provides comprehensive instructions for setting up, operating, and maintaining your Sharp Digital Alarm Clock (Model SPC387). This clock features a clear red LED display, dual alarms, an ascending alarm volume, and battery backup for continued operation during power outages. Designed for ease of use, it is suitable for all users.

Sharp Digital Alarm Clock, front view with red LED display showing 12:08 PM

Figura 1: Quddiem view of the Sharp Digital Alarm Clock, displaying 12:08 PM in red LEDs.

Karatteristiċi tal-Prodott

Simple & Hassle-Free Operation: Designed for ease of use.
Easy-Set Dual Alarms: Program two separate alarm times.
Gentle Ascending Alarm: Il-volum tal-allarm jiżdied gradwalment.
Backup tal-batterija: Maintains settings during power outages (requires 2x AA batteries, sold separately).
Large Easy-Read Red LED Display: Bold, bright numbers for clear visibility.

Diagram highlighting key features of the Sharp Digital Alarm Clock: 0.7 inch red LED display, dual alarm, ascending alarm volume, easy-set top button controls, and optional battery backup.

Figure 2: Diagram illustrating the main features of the alarm clock, including the display size, dual alarm capability, ascending alarm, top controls, and battery backup option.

Setup Istruzzjonijiet

1. Konnessjoni tal-Enerġija

Plug the AC power cord into a standard 120V AC wall outlet. The display will illuminate, and the clock will be ready for time setting.

2. Installazzjoni ta 'Backup tal-Batterija

For battery backup, open the battery compartment cover located on the bottom of the unit. Insert two (2) new AA batteries (not included), observing the correct polarity (+ and -). Close the battery compartment cover. The battery backup feature will maintain time and alarm settings during a power interruption, but the display will not be illuminated.

Qiegħ view of the Sharp Digital Alarm Clock showing the battery compartment open, ready for AA batteries.

Figure 3: The underside of the alarm clock, showing the battery compartment for backup power.

Istruzzjonijiet Operattivi

1. Issettjar tal-Ħin

Agħfas u żomm il- ĦIN button. The time display will begin to flash.
Waqt li żżomm il- ĦIN buttuna, agħfas il- SIEGĦA buttuna biex taġġusta s-siegħa. Osserva l-indikatur PM għall-issettjar korrett ta' AM/PM.
Filwaqt li għadu jżomm il- ĦIN buttuna, agħfas il- MINUTA buttuna biex taġġusta l-minuti.
Irrilaxxa l- ĦIN buttuna biex tissettja l-ħin.

2. Setting the Alarm (Dual Alarm)

This clock supports two independent alarms (AL1 and AL2).

Żerżaq il- ALARM 1/2/DUAL switch to select either AL1 or AL2. The corresponding alarm indicator (AL1 or AL2) will illuminate on the display.
Agħfas u żomm il- ALLARM button. The alarm time display will begin to flash.
Waqt li żżomm il- ALLARM buttuna, agħfas il- SIEGĦA button to adjust the alarm hour. Observe the PM indicator.
Filwaqt li għadu jżomm il- ALLARM buttuna, agħfas il- MINUTA buttuna biex taġġusta l-minuti tal-allarm.
Irrilaxxa l- ALLARM buttuna biex tissettja l-ħin tal-allarm.
Biex tattiva l-allarm, kun żgur li ALLARM ON / OFF switch is in the ON position. The selected alarm indicator (AL1 or AL2) will remain lit.
To set the second alarm, repeat steps 1-6, selecting the other alarm (AL2 or AL1).

Fuq view of the Sharp Digital Alarm Clock with labels for each button: Alarm On/Off, Hour, Minute, Time, Alarm, and Alarm 1/2/Dual switch, plus the large Snooze button.

Figura 4: Aktarview of the control buttons on the top of the alarm clock for setting time and alarms.

3. L-Użu tal-Funzjoni Snooze

Meta jdoqq l-allarm, agħfas il-buttuna l-kbira SNOOZE button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Turning Off the Alarm

To turn off the alarm completely, slide the ALLARM ON / OFF switch to the OFF position. The alarm indicator (AL1 or AL2) will turn off.

5. Ascending Alarm Volume

The alarm starts at a low volume and gradually increases, providing a gentle wake-up experience. If not turned off, the alarm will continue to increase in volume and frequency.

Sharp Digital Alarm Clock on a bedside table, displaying 12:08 PM, with text 'ASCENDING ALARM VOLUME' below.

Figure 5: The alarm clock positioned on a nightstand, illustrating its compact size and the ascending alarm feature.

Manutenzjoni

Naddaf l-arloġġ b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
Evita li tesponi l-unità għal temperaturi estremi, dawl tax-xemx dirett, jew umdità għolja.
Replace backup batteries annually to ensure reliable performance.

Issolvi l-problemi

Problema	Soluzzjoni
Il-wiri huwa vojt.	Ensure the AC power cord is securely plugged into a working outlet. If using battery backup, the display will not light up; it only preserves settings.
L-allarm ma jdoqqx.	Iċċekkja jekk il- ALLARM ON / OFF switch is in the ON position. Verify the alarm time is set correctly and the PM indicator is accurate.
Time/Alarm settings are lost after power outage.	Ensure fresh AA batteries are installed correctly in the battery backup compartment.
Clock feels hot.	Unplug the clock immediately and discontinue use. Contact customer support.
Alarm is too quiet/loud.	The alarm volume is ascending. Allow time for it to increase. There is no manual volume adjustment.
Vol mhux korretttage warning (UK/Gulf regions).	This clock is designed for 110V-120V AC power. It is not compatible with 220V-240V systems without a proper voltage converter. Using an incorrect voltage may damage the unit and pose a safety risk.

Speċifikazzjonijiet

Ditta: Sharp
Mudell: SPC387
Kulur: Black - Red LED
Tip ta' wiri: LED diġitali
Dimensjonijiet tal-Prodott: 5.5"W x 2.1"Għ
Sors tal-Enerġija: Electrical (AC) with Battery Backup (2x AA batteries, not included)
Materjal: Plastik
Piż tal-oġġett: 8.8 uqija
Karatteristika Speċjali: Dual Alarm, Ascending Alarm Volume, Snooze Function

Garanzija u Appoġġ

This product comes with a Limited Warranty from Sharp. For detailed warranty information or technical support, please refer to the documentation included in your product packaging or visit the official Sharp websit.

For further assistance, you may also contact the seller, The Clock Shop - Sharp, through their Amazon store page.

Manifattur: SHARP

	SHARP SPC189/SPC193 LED Alarm Clock with USB Port: Instruction Manual & Warranty Official instruction manual and warranty information for the SHARP SPC189 and SPC193 LED Alarm Clock with USB charging ports. Learn how to set time, alarm, use snooze, USB charging, and safety precautions.
	SPC268 Arloġġ tal-Allarm tax-Xemx bil-Port USB: Manwal tal-Istruzzjonijiet u Garanzija Manwal ta' struzzjoni uffiċjali u informazzjoni dwar il-garanzija għall-Arloġġ tal-Allarm tax-Xemx SHARP SPC268 bil-Port USB. Tgħallem kif tissettja l-arloġġ, l-allarmi, tuża d-dwal tax-xemx ix-xemx u dawk li jibdlu l-kulur, u tifhem il-prekawzjonijiet ta' sigurtà.
	SHARP SPC543 Projection Alarm Clock with USB Port - Instruction Manual Official instruction manual and warranty information for the SHARP SPC543 Projection Alarm Clock with USB Port. Learn how to set the clock, alarm, date, use the projection feature, and understand safety instructions.
	SHARP SPC500 LCD Digital Alarm Clock User Manual and Instructions Official user manual and instructions for the SHARP SPC500 LCD Digital Alarm Clock. Learn how to set the time, set the alarm, use the snooze and backlight features, and understand power supply and battery warnings. Includes FCC information.
	SHARP SPC483/SPC222 LCD Digital Alarm Clock User Manual User manual providing instructions for setting up and operating the SHARP SPC483 and SPC222 LCD Digital Alarm Clocks, including features, power, care, and FCC compliance.
	Sharp SPC182 LED Alarm Clock with USB Port - Instruction Manual and Warranty Official instruction manual and warranty information for the Sharp SPC182 LED Alarm Clock with USB Port. Learn about features, setup, operation, safety precautions, and customer support.

Sharp SPC387