Introduzzjoni
This manual provides instructions for the setup, operation, and maintenance of your Sharp SPC736ABAMZ Alarm Clock. Please read these instructions carefully before using the device to ensure proper function and longevity.
Immaġni: Quddiem view of the Sharp SPC736ABAMZ Alarm Clock, displaying the time 12:08 PM with a clear, large white LED.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Sharp SPC736ABAMZ Alarm Clock
- Manwal għall-Utent
Karatteristiċi tal-Prodott
- Jumbo 1.8" White LED Display: Features an extra-large display for enhanced visibility.
- 3-Step Dimmer Control: Adjust display brightness to High, Medium, or Low settings.
- Allarmi Doppju: Set two independent alarm times.
- Backup tal-batterija: Requires two (2) AAA batteries (not included) to maintain time and alarm settings during power outages. The display will not be lit during battery backup.
- Electric Operated: The clock operates via a standard 110V/120V power outlet.
Immaġni: Fuqview of the alarm clock's key features, including its large display, dimmer control, dual alarms, and battery backup capability.
Setup
1. Konnessjoni tal-Enerġija
- Plug the power cord into a standard 110V/120V AC electrical outlet.
- The display will illuminate, and the clock will be ready for time setting.
2. Installazzjoni ta 'Backup tal-Batterija
The battery backup feature requires two (2) AAA batteries (not included). These batteries preserve time and alarm settings during a power interruption but do not power the display.
- Sib il-kompartiment tal-batterija fil-qiegħ tal-arloġġ.
- Iftaħ l-għatu tal-kompartiment tal-batterija.
- Insert two (2) new AAA batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Istruzzjonijiet Operattivi
Image: Diagram illustrating the location and function of control buttons and display indicators on the Sharp alarm clock.
1. Issettjar tal-Ħin
- Agħfas u żomm il- IL-ĦIN IPPOST button. The hour digits will begin to flash.
- Waqt li żżomm IL-ĦIN IPPOST, agħfas il- + button to advance the hour or the - button to decrease the hour. Observe the PM indicator for correct AM/PM setting.
- Irrilaxxa l- IL-ĦIN IPPOST button briefly, then press and hold it again. The minute digits will begin to flash.
- Waqt li żżomm IL-ĦIN IPPOST, agħfas il- + button to advance the minute or the - button to decrease the minute.
- Irrilaxxa l- IL-ĦIN IPPOST buttuna biex tikkonferma l-issettjar tal-ħin.
2. Issettjar tal-Allarmi (Allarm 1 u Allarm 2)
The clock features two independent alarms. The procedure is identical for both.
- Agħfas u żomm il- ALARM 1 SET/ON/OFF buttuna (għall-Allarm 1) jew ALARM 2 SET/ON/OFF button (for Alarm 2). The alarm hour digits will begin to flash.
- While holding the respective alarm button, press the + button to advance the hour or the - button to decrease the hour. Observe the PM indicator for correct AM/PM setting.
- Release the alarm button briefly, then press and hold it again. The alarm minute digits will begin to flash.
- While holding the respective alarm button, press the + button to advance the minute or the - button to decrease the minute.
- Release the alarm button to confirm the alarm time setting.
- To activate an alarm, press the corresponding ALARM SET/ON/OFF button once. The alarm indicator (bell icon) for that alarm will illuminate on the display. Press it again to deactivate the alarm; the indicator will turn off.
3. Dimmer Control
The display brightness can be adjusted to three levels: High, Medium, and Low.
- Agħfas il- SNOOZE / DIMMER button repeatedly to cycle through the brightness levels: High → Medium → Low → High.
Image: Visual representation of the alarm clock's display at High, Medium, and Low brightness settings.
4. Funzjoni Snooze
When an alarm sounds:
- Agħfas il- SNOOZE / DIMMER button to temporarily silence the alarm. The alarm will sound again after a short interval.
- To turn off the alarm completely, press the corresponding ALARM SET/ON/OFF buttuna.
Operazzjoni ta 'Backup tal-Batterija
The battery backup system is designed to maintain the time and alarm settings in the event of a power outage. It does not power the clock's display or alarm sound.
- Waqt qawwa outage, the display will be blank.
- Once power is restored, the display will re-illuminate, and the clock will show the correct time (assuming batteries were installed).
- It is recommended to check the time for accuracy after a power interruption and reset if necessary.
Manutenzjoni
- Biex tnaddaf l-arloġġ, uża drapp artab u niexef.
- Tużax prodotti tat-tindif, xama', jew solventi li joborxu għax jistgħu jagħmlu ħsara lill-finitura.
- Ensure the clock is unplugged before cleaning.
Issolvi l-problemi
| Problema | Soluzzjoni |
|---|---|
| Il-wiri huwa vojt. | Ensure the power cord is securely plugged into a working electrical outlet. If a power outage occurred, the display will remain blank until power is restored. |
| L-allarm ma jdoqqx. | Verify that the alarm is activated (the alarm indicator should be lit). Check that the alarm time is set correctly (AM/PM). |
| Time or alarm settings are lost after a power outage. | Ensure two (2) fresh AAA batteries are correctly installed in the battery backup compartment. Replace old batteries if necessary. |
| Cannot adjust time or alarm. | Ensure you are pressing and holding the correct SET button while using the + or - buttons. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | SPC736ABAMZ |
| Tip ta 'Wiri | LED diġitali |
| Daqs tal-Wiri | 1.8 inches (digit height) |
| Sors tal-Enerġija | AC 110V/120V (Electrical Operation) |
| Backup tal-batterija | 2 x batteriji AAA (mhux inklużi) |
| Dimensjonijiet (W x H) | 6.9" x 3.4" |
| Materjal | Acrylonitrile Butadiene Styrene (ABS) |
| Kulur | Iswed b'LED abjad |
Garanzija u Appoġġ
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Sharp websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
