Manwal tal-Utent tat-Tapit tat-Tisħin DEVIcomfort Thin-Bed

1. Introduzzjoni

This user manual provides essential information for the safe and efficient installation, operation, and maintenance of your DEVIcomfort Thin-Bed Heating Mat. Please read this manual thoroughly before beginning any installation or operation to ensure proper function and to prevent damage or injury.

The DEVIcomfort heating mat is designed for indoor floor heating applications, providing comfortable warmth in various rooms. It is particularly suitable for renovation projects due to its low installation height.

2. Istruzzjonijiet tas-Sigurtà

WARNING: Electrical installation must be performed by a qualified electrician in accordance with all local and national electrical codes and regulations.

• Always disconnect power before installing or servicing the heating mat.
• Do not cut or shorten the heating cable. Only the cold lead can be shortened if necessary.
• Ensure the heating mat is fully embedded in a suitable adhesive or leveling compound.
• Do not overlap heating cables or mats.
• Protect the heating mat from mechanical damage during and after installation.
• The heating mat must be connected to a Residual Current Device (RCD) with a tripping current not exceeding 30 mA.
• Do not install the heating mat under fixed furniture without legs (e.g., kitchen cabinets, bathtubs) or appliances that prevent heat dissipation.
• Ensure proper floor sensor placement for accurate temperature control.

3. Prodott Aktarview

The DEVIcomfort heating mat consists of a self-adhesive mesh with pre-attached heating cables. It is designed for quick and easy installation directly under various floor coverings.

Figure 1: Components of the DEVIcomfort Thin-Bed Heating Mat system. Shown are the rolled heating mat, the cold lead connection cable, a protective corrugated conduit for the floor sensor, and the floor sensor itself.

Il-komponenti ewlenin jinkludu:

• Tapit tat-tisħin: A fiberglass mesh with integrated heating cable.
• Ċomb Kiesaħ: The non-heating cable connecting the mat to the thermostat/power supply.
• Sensor tal-Art: Used with a compatible thermostat to measure and regulate floor temperature.
• Corrugated Conduit: Protects the floor sensor cable and allows for future replacement.

4. Setup u Installazzjoni

Proper installation is crucial for the performance and longevity of your heating mat. Consult a qualified electrician for all electrical connections.

4.1. Preparazzjoni

1. Kun żgur li s-subfloor ikun nadif, niexef u livell.
2. Plan the layout of the heating mat, avoiding areas under fixed installations.
3. Mark the position for the thermostat and the floor sensor conduit.
4. Cut a channel in the floor for the floor sensor conduit and the cold lead.

4.2. Mat Laying

1. Begin laying the mat from the thermostat connection point.
2. Unroll the mat, pressing the self-adhesive backing firmly to the subfloor.
3. To change direction, cut the mesh (do not cut the heating cable!) and turn the mat.
4. Ensure the heating cables are evenly spaced and not overlapping.

4.3. Konnessjoni Elettrika

• Connect the cold lead to a suitable thermostat and power supply according to the thermostat's instructions and local electrical codes.
• Install the floor sensor into the corrugated conduit and place it centrally between two heating cables. The end of the conduit should be sealed to prevent ingress of leveling compound.
• Perform insulation resistance and resistance tests before and after embedding the mat. Record the readings.

4.4. Embedding

Cover the heating mat completely with a flexible tile adhesive or self-leveling compound. Ensure no air pockets remain around the heating cables. Allow the compound to cure fully before applying the final floor covering.

5. Joperaw

The DEVIcomfort heating mat operates in conjunction with a compatible floor heating thermostat (sold separately). The thermostat controls the on/off cycles of the heating mat based on the desired temperature settings and sensor readings.

• Istartjar Inizjali: After installation and curing of the floor covering, wait at least 7 days before initial startup to allow all materials to fully dry and cure.
• Kontroll tat-temperatura: Use the thermostat to set the desired floor or room temperature. Refer to your thermostat's user manual for specific programming instructions.
• Effiċjenza tal-Enerġija: For optimal energy efficiency, consider programming your thermostat to reduce temperature during unoccupied periods or at night.

Note: This heating mat is designed to be controlled by a remote thermostat. The mat itself does not have integrated controls.

6. Manutenzjoni

The DEVIcomfort Thin-Bed Heating Mat is virtually maintenance-free once installed correctly and embedded. However, general care of your floor covering is recommended.

• Avoid drilling or nailing into the floor where the heating mat is installed. Consult floor plans or use a cable locator if unsure.
• Ensure the thermostat is kept clean and free from dust.
• In case of any malfunction, do not attempt to repair the heating mat yourself. Contact a qualified electrician or the manufacturer's support.

7 Issolvi l-problemi

If your floor heating system is not functioning as expected, consider the following common issues:

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact a qualified electrician or Devi customer support.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Devi products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Devi websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

For technical support, installation queries, or warranty service, please contact your local Devi distributor or customer service center. Contact information can typically be found on the Devi webis-sit jew l-imballaġġ tal-prodott.

Websit: www.devi.com