Introduzzjoni
This manual provides essential information for the proper setup, operation, and maintenance of your 360 S7 Pro Robot Vacuum and Mop. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Image: The 360 S7 Pro Robot Vacuum and Mop, showcasing its sleek black design and accompanying mobile app interface.
Gwida ta' Setup
1. Tneħħija tal-kaxxa u l-komponenti
Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Kun żgur li l-oġġetti kollha elenkati hawn taħt huma preżenti:
- 360 S7 Pro Robot Vacuum and Mop
- Baċir tal-Iċċarġjar
- Adapter tal-Enerġija
- Water Tank and Mop Pad
- Cleaning Tool (for brush roll)
- Xkupilji tal-Ġnub
- Manwal għall-Utent (dan id-dokument)
2. Tqegħid tal-Baċir tal-Iċċarġjar
Place the charging dock against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides of the dock and 1.5 meters (4.9 feet) in front of it. This allows the robot to easily return for charging.
3. Iċċarġjar Inizjali
Connect the power adapter to the charging dock and plug it into a wall outlet. Place the robot vacuum onto the charging dock. The indicator lights on the robot will illuminate to show it is charging. For first use, allow the robot to fully charge, which typically takes approximately 4-5 hours.
4. Installazzjoni u Konnessjoni tal-App
Download the "360Robot" app from your mobile device's app store. Follow the in-app instructions to create an account and connect your 360 S7 Pro to your home Wi-Fi network. Note that the 360 S7 Pro only supports 2.4GHz Wi-Fi networks and is not compatible with 5GHz networks.
5. Immappjar Inizjali
For optimal performance, allow the robot to complete an initial mapping run of your home without interruption. During this process, the robot uses its LiDAR navigation system to create a detailed map of your floor plan. Ensure all doors to areas you wish to map are open. The robot may return to its charging dock multiple times to recharge during this process. Do not manually move the robot or interrupt its cleaning cycle until it announces "Cleaning is complete!" and returns to the dock on its own.
Image: The 360 S7 Pro demonstrating its precision LiDAR navigation, creating a virtual map of the room.
Istruzzjonijiet Operattivi
1. Kontrolli Bażiċi
- On-Device Button: Press the main power button on the robot to start or pause a cleaning cycle. Press and hold to send the robot back to the charging dock.
- App mobbli: The "360Robot" app provides comprehensive control over your robot, including starting/stopping cleaning, selecting cleaning modes, setting schedules, and managing maps.
2. Modi ta 'tindif
The 360 S7 Pro offers versatile cleaning options:
- Vakwu Biss: Għall-ġbir ta' debris niexef.
- Mopp Biss: For wet cleaning with the water tank attached.
- Vacuum & Mop Simultaneously: Performs both functions in a single pass. Ensure the water tank is filled and the mop pad is attached.
Image: The 360 S7 Pro in action, illustrating its dual vacuuming and mopping capabilities.
3. Smart Features via App
Utilize the "360Robot" app to access advanced cleaning functionalities:
- Virtual Boundaries and No-Go Zones: Draw virtual lines or rectangular zones on the map within the app to restrict the robot from entering specific areas. This is useful for protecting delicate items or preventing access to certain rooms. When mopping, you can set "no-mop zones" to avoid carpets.
- Selective Room Cleaning: After mapping, the app will divide your home into distinct rooms. You can select specific rooms for cleaning, allowing for targeted cleaning based on your needs.
- Tindif taż-Żona: Define a custom area on the map for the robot to clean. This is ideal for cleaning spills or high-traffic spots.
- Tindif Skedat: Set up daily or weekly cleaning schedules for automated cleaning at your preferred times.
- Aġġustament tal-Qawwa tal-Ġbid: Adjust the suction power from Quiet (600 Pa) to Standard (1000 Pa), Powerful (1500 Pa), or Max (2650 Pa) depending on the cleaning requirements. The robot can automatically increase suction on carpets.
Image: An illustration of the customizable cleaning options available through the 360Robot app, including scheduled, selective room, zone, deep, no-go lines, and no-mop zones.
Image: The 360 S7 Pro demonstrating the virtual boundaries feature, preventing the robot from entering a designated area.
Image: A visual representation of the 360 S7 Pro's adjustable suction power levels, ranging from Quiet (600 Pa) to Max (2650 Pa), suitable for various debris types.
4. Kontroll tal-Vuċi
The 360 S7 Pro is compatible with Amazon Echo and Google Home. Link your robot vacuum to your smart home assistant through the respective app to control it using voice commands.
Manutenzjoni
Regular maintenance ensures optimal performance and extends the lifespan of your 360 S7 Pro. Always power off the robot before performing any maintenance.
1. Dust Bin Emptying
Empty the dust bin after each cleaning cycle or when the app indicates it is full. To empty, press the dust bin release button, remove the bin, open its lid, and discard the collected debris.
2. Tindif/Sostituzzjoni tal-Filtru
The robot uses a cloth filter. Tap the filter gently to remove loose dirt. For deeper cleaning, rinse the filter under running water. Ensure the filter is completely dry before reinserting it into the dust bin. Replace the filter every 3-6 months, or as needed, to maintain suction efficiency.
3. Tindif bir-Romblu tal-Pinzell
Periodically remove the main brush roll and side brushes to clear any tangled hair or debris. Use the provided cleaning tool to cut and remove hair wrapped around the brush roll. Ensure the brushes are free of obstructions for effective cleaning.
4. Water Tank and Mop Pad Maintenance
After mopping, empty any remaining water from the water tank. Remove the mop pad and rinse it thoroughly. Allow both the water tank and mop pad to air dry completely before storing or reattaching.
5. Tindif tas-Sensor
Wipe the robot's sensors (including cliff sensors, wall sensors, and the LiDAR sensor window) with a clean, dry cloth. Keeping sensors clean is crucial for accurate navigation and obstacle avoidance.
Issolvi l-problemi
If you encounter issues with your 360 S7 Pro, refer to the common problems and solutions below. For more complex issues, contact customer support.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ir-robot ma jiċċarġjax. | Charging dock not powered; poor contact with charging pins; robot not properly docked. | Ensure charging dock is plugged in. Clean charging pins on both robot and dock. Re-dock the robot, ensuring proper alignment. |
| Ir-robot jeħel spiss. | Obstacles (cables, rugs, furniture); dirty sensors. | Clear obstacles from the cleaning path. Use virtual boundaries for problem areas. Clean all sensors. |
| Problemi bil-konnessjoni tal-app. | Incorrect Wi-Fi password; 5GHz Wi-Fi network; weak signal. | Verify Wi-Fi password. Ensure you are connected to a 2.4GHz network. Move robot closer to router. Restart router and robot. |
| Prestazzjoni fqira tat-tindif. | Full dust bin; dirty filter; tangled brushes. | Empty dust bin. Clean or replace filter. Clean main brush roll and side brushes. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok irreferi għat-taqsima tal-Garanzija u l-Appoġġ għal aktar assistenza.
Speċifikazzjonijiet tal-Prodott
| Brand | 360 |
| Mudell | S7 Pro |
| Karatteristiċi Speċjali | Smart Mapping, Selective Room Cleaning, LiDAR Navigation, Logical Navigation, Scheduling |
| Kulur | Iswed |
| Dimensjonijiet tal-Prodott | 17.13"T x 17.13"W x 6.65"Għ |
| Komponenti Inklużi | Pinzell |
| Tip ta 'filtru | Drapp |
| Ħajja tal-batterija | minuti 120 |
| Kapaċità tat-Tank tal-Ilma | 170 Millilitru |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Batteriji Inklużi | Yes (1 Lithium Metal battery) |
| Metodu ta' Kontroll | Vuċi, App |
| Batterija tal-litju Voltage | 3.7 Volts |
| Apparati Kompatibbli | Amazon Echo, Google Home |
| Piż tal-oġġett | 10.58 liri |
Garanzija u Appoġġ
Informazzjoni dwar Garanzija
The 360 S7 Pro Robot Vacuum and Mop comes with a one-year worry-free warranty service from the date of purchase. This warranty covers manufacturing defects and ensures your product functions as intended under normal use.
Appoġġ għall-Klijent
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact 360 Smart Life Customer Support. We offer 24-hour technical support and aim to respond to all inquiries within 24 hours. You can reach us through the "360Robot" app or via our official websit.
A local after-service center is available in California, USA, for convenient support.
Image: The 360 Smart Life company logo, representing the brand's commitment to customer service.
