1. Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BTF-LIGHTING SP601E Bluetooth LED Controller. This controller is designed for use with addressable LED pixel strip lights such as WS2812B, WS2811, and 1903 types, offering dual signal output, music synchronization via a built-in microphone, and versatile control options.
2. Informazzjoni dwar is-Sigurtà
- Tiżgura l-provvista tal-enerġija voltage jaqbel mal-vol tax-xogħoltage of your LED lights (DC5V-24V). Using an incorrect voltage can damage the LED lights.
- Do not use a 12V or 24V power supply for 5V LED strips.
- Avoid lighting up full brightness white light for extended periods, as addressable RGB IC light strips are primarily designed for dynamic chasineffetti g.
- Insufficient power supply can lead to controller malfunction, frozen colors, unresponsive remote control, and Bluetooth disconnection. Ensure adequate power for your LED project.
- Dan l-apparat huwa maħsub għall-użu fuq ġewwa biss.
3. Prodott Aktarview
The BTF-LIGHTING SP601E is a versatile LED controller offering multiple control methods and advanced features for dynamic lighting effects.
3.1. Karatteristiċi ewlenin
- Dual Signal Output Ports: Two independent output ports, each controlling up to 600 pixels (total 1200 pixels). Effects on one port do not impact the other.
- Mikrofonu inkorporat: Captures ambient sound for music-synchronized lighting effects. Sensitivity is fixed.
- Metodi ta' Kontroll Multipli: Control via Android/iOS app ("Banlan X" or "SceneX"), RF remote control, or integrated 3-key buttons on the controller.
- Effetti dinamiċi: 12 music lighting effects, 24 special effects, and 16 million monochrome options. Adjustable speed, brightness, and channel order.
- Funzjoni tal-ħin: Set up to 5 timers for automated light strip operation.
- Funzjoni tal-Grupp: Control up to 5 devices within one group.
- Funzjoni tal-memorja: Retains settings in case of power-down.
- Kalibrazzjoni tal-Kulur: Adjust app color to match LED strip output.
3.2. Kontenut tal-Pakkett
- BTF-LIGHTING SP601E Bluetooth LED Controller
- Kontrollur mill-Bogħod RF
3.3. Controller and Remote Layout
4. Setup
4.1. Konnessjoni tal-Ħardwer
- Connect LED Strips: Connect your compatible LED pixel strip lights (WS2812B, WS2811, 1903) to the dual signal output ports of the SP601E controller. Ensure correct polarity. The controller supports two independent channels.
- Qabbad il-Provvista tal-Enerġija: Connect a DC5V-24V power supply (5.5mm x 2.1mm DC connector) to the controller. The voltage of the power supply must match the operating voltage of your LED strips.
Importanti: If your LED light is 5V, use a 5V power supply. Never use 12V or 24V power with 5V LED lights to prevent damage.
- Qawwa Mixgħul: Plug the power supply into a wall outlet. The LED strips should illuminate.
Video 1: SP601E Music Controller Setup. This video demonstrates the physical connection of the SP601E controller to LED strips and a power source, showing the initial setup and basic functionality of the lighting.
4.2. Installazzjoni u Konnessjoni tal-App
- Niżżel l-App: Fittex għal "Banlan X" or "SceneX" in the App Store (iOS) or Google Play Store (Android), or scan the QR code provided on the product packaging or in Figure 4.
Alternattivament, tista 'żżur https://download.ledhue.com/page/scenex/ for app download links.
- Ippermetti Bluetooth: Kun żgur li l-Bluetooth huwa attivat fuq l-ismartphone tiegħek.
- Iftaħ l-App u Qabbad: Open the "Banlan X" or "SceneX" app. The app will search for the controller's Bluetooth signal. Select "SP601E" from the list of available devices to connect.
Video 2: SP601E/SP608E Controller App Control. This video demonstrates the process of connecting the controller via the app and adjusting various lighting parameters, including dynamic effects, static colors, and sensitivity settings.
5. Istruzzjonijiet Operattivi
5.1. App Control (Banlan X / SceneX)
Once connected, the app provides comprehensive control over your LED strips.
- Kontroll tal-Kanal: Turn individual channels (Channel 1, Channel 2) or all channels ON/OFF.
- Effetti dinamiċi: Select from 12 music lighting effects and 24 special effects. Adjust speed, brightness, and effect length.
- Aġġustament tal-Kulur Statiku: Choose from 16 million colors. Adjust hue and saturation for precise color selection.
- Sensittività tal-mikrofonu: The built-in microphone's sensitivity for music modes is fixed and cannot be adjusted via the app.
- Save Scenes: Save your preferred lighting effects to groups or select pre-defined group effects.
5.2. Controller Button Control
The controller features three physical buttons for basic operation:
- Buttuna tal-Qawwa: Turns the controller and connected LED strips ON/OFF.
- Buttuna tal-Modalità (M): Cycles through different lighting modes/effects.
- Speed Button (S): Jaġġusta l-veloċità tal-effetti tad-dawl dinamiku.
5.3. RF Remote Control
The included RF remote provides convenient wireless control.
- ON/OFF: Power button to turn lights on or off.
- Lock/Nislock: Press for 5 seconds to lock the remote.
- Luminożità: Adjust the overall brightness of the lights.
- Veloċità: Adjust the speed of dynamic effects.
- Xena Awtomatika: Jiċċaqlaq awtomatikament minn xeni pprogrammati minn qabel.
- Scene Buttons (1-9): Directly select specific lighting scenes.
5.4. Color Calibration
If the colors displayed in the app do not match the actual output of your LED strip, use the color calibration feature within the app to synchronize them.
6. Manutenzjoni
- Keep the controller and remote clean and dry.
- Evita li tesponi l-apparat għal temperaturi jew umdità estremi.
- Do not attempt to open or repair the controller yourself, as this will void the warranty.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Controller loses control, colors frozen, remote unresponsive, Bluetooth disconnected. | Provvista ta 'enerġija insuffiċjenti. | Ensure your power supply provides adequate wattage for your LED strips. If the LED strip is progressively darker at the end, add voltage to the strip. |
| App color inconsistent with LED strip color. | Kalibrazzjoni tal-kulur meħtieġa. | Use the color calibration function within the app to adjust. |
| LED strip effect is stuck or not changing. | Controller freezing or power issue. | Disconnect and reconnect power to the controller. Verify power supply adequacy. |
| Ma nistax nikkonnettja mal-app permezz tal-Bluetooth. | Bluetooth not enabled, app issue, or controller not discoverable. | Ensure Bluetooth is on. Close and reopen the app. Restart the controller. |
8. Speċifikazzjonijiet
- Mudell: SP601E
- Ditta: BTF-DAWL
- Input Voltage: DC5V-24V (via 5.5mm x 2.1mm DC power jack)
- Control Pixel Quantity: Max 600 pixels per port, 1200 pixels total (two ports)
- Supported ICs: SPI (TTL) Digital Signal WS2811, WS2812B, 1903, 16703 (Except SK6812 RGBW)
- Metodi ta' Kontroll: RF remote control, Bluetooth app control (Android/iOS), 3-key button control
- Modalità Mużika: Built-in microphone (fixed sensitivity)
- Effetti tad-Dawl: 12 music effects, 24 special effects, 16 million monochrome colors
- Dimensjonijiet: 4 x 2.3 x 1.1 inches (Controller)
- Piż tal-oġġett: 2.11 uqija (0.06 Kilogrammi)
- Użu fuq ġewwa/barra: Użu fuq ġewwa biss
- Komponenti Inklużi: Kontrollur remot RF
9. Appoġġ u Garanzija
For technical assistance or questions regarding power supply compatibility for your LED project, please contact BTF-LIGHTING customer support. Refer to your product packaging or the official BTF-LIGHTING websit għal informazzjoni ta' kuntatt.
This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims. Any unauthorized modification or improper use of the device will void the warranty.
