1. Introduzzjoni
This manual provides detailed instructions for assembling your ROBOTIME 3D Wooden Puzzle Sailing Ship model kit. Designed for individuals aged 8 and above, this kit offers an engaging construction experience without the need for glue or additional tools. Please read all instructions carefully before beginning assembly.
Figure 1: Completed Sailing Ship Model.
2. Komponenti Inklużi
Before starting, verify that all components are present in your kit:
- Pre-cut Wooden Pieces: Various laser-cut wooden sheets containing all parts for the sailing ship.
- Manwal ta' Istruzzjoni: This guide, providing step-by-step assembly instructions.
- Kit Aċċessorju: May include string for rigging or other small decorative elements.
Figura 2: Eżample of wooden puzzle pieces and assembly process.
3. Istruzzjonijiet tal-Assemblea
Follow these steps carefully to assemble your 3D wooden puzzle sailing ship. No glue or special tools are required, as pieces are designed to interlock.
3.1 Preparazzjoni
- Ħoll il-Komponenti: Carefully remove all wooden sheets and the instruction manual from the packaging.
- Identifika l-Partijiet: Refer to the diagrams in your included instruction booklet to identify each piece. Pieces are typically numbered or lettered on the sheets.
- Ipprepara l-Ispazju tax-Xogħol: Ensure you have a clean, flat, and well-lit surface to work on.
3.2 Detaching Pieces
Gently press out each piece from its wooden sheet. If a piece is difficult to remove, use a small, blunt object (like the back of a spoon handle) to push it out from the reverse side. Avoid forcing pieces, as this may cause breakage.
3.3 Step-by-Step Construction
Follow the numbered steps and diagrams provided in your kit's specific instruction booklet. The general process involves:
- Assemblaġġ tal-Bażi: Begin by constructing the base and the lower hull sections of the ship.
- Hull Construction: Gradually build up the ship's hull by interlocking the side and deck pieces.
- Dettalji: Attach smaller components such as the cabin, mast supports, and decorative elements.
- Mast and Sails: Assemble the masts and sails according to the diagrams. Pay close attention to the orientation of each part.
- Rigging (if applicable): If your model includes string for rigging, follow the instructions for threading and securing it to the masts and sails.
- Final Stand: Assemble the wave-like display stand and securely place the completed ship onto it.
Figure 3: Key components of the sailing ship model: Mast, Cabin, Body, and Base.
Għajnuniet Importanti:
- Il-Paċenzja hija Essenzjali: Take your time with each step. Rushing can lead to errors or damage.
- Pressjoni Ġentili: Apply only gentle, even pressure when interlocking pieces.
- Irreferi għad-Dijagrammi: Always cross-reference the physical pieces with the diagrams in the instruction booklet.
4. Manutenzjoni u Kura
To ensure the longevity and appearance of your ROBOTIME 3D Wooden Puzzle Sailing Ship, follow these care guidelines:
- Tindif: Dust the model regularly with a soft, dry cloth or a soft-bristled brush. Avoid using water or chemical cleaners, as these can damage the wood.
- Pjazzament: Display the model in a stable location away from direct sunlight, extreme temperatures, and high humidity. These conditions can cause the wood to warp, fade, or crack.
- Immaniġġjar: Handle the model carefully, especially delicate parts like masts and rigging. Avoid dropping or subjecting it to impact.
5 Issolvi l-problemi
Here are solutions to common issues you might encounter during assembly or with the finished model:
| Ħruġ | Soluzzjoni |
|---|---|
| Piece does not fit: | Ensure you are using the correct piece for the step. Check the orientation. If the fit is very tight, gently sand the edges of the tab or slot with fine-grit sandpaper. Do not force. |
| Piece breaks during removal or assembly: | Small breaks can often be repaired with a small amount of wood glue. Apply sparingly and hold the pieces together until dry. For significant breaks or missing pieces, contact customer support. |
| Il-mudell mhux stabbli: | Recheck all connections, especially those in the base and hull. Ensure all interlocking tabs are fully seated. |
| Rigging is loose or incorrect: | Carefully re-thread the string according to the instruction diagrams. Ensure knots are secure but not overly tight to avoid stressing the wooden parts. |
6. Speċifikazzjonijiet tal-Prodott
- Ditta: ROBOTIME
- Numru tal-Mudell: d43992f3-f078-4136-89fa-2de80fa2abe2
- Dimensjonijiet tal-Prodott: Assembled model dimensions are approximately 7.9 x 1.8 x 4.7 inches (20.1 x 4.6 x 11.9 cm).
- Piż: 150 gramma
- Materjal: Injam
- Numru ta' Biċċiet: 118-il biċċa
- Età Rakkomandata: 8 snin 'il fuq
- Assemblaġġ Meħtieġa: Iva
- Għanijiet Edukattivi: Promotes concentration, patience, and ability to follow instructions.
Figura 4: Dimensjonijiet tal-prodott u speċifikazzjonijiet ewlenin.
7. Appoġġ għall-Klijent
For any questions, missing parts, or assistance with assembly, please contact ROBOTIME customer support. Refer to the contact information provided with your product packaging or visit the official ROBOTIME websit għall-għażliet ta 'appoġġ.
Riżorsi onlajn:
- ROBOTIME Official Store: Żur il-Ħanut
