Introduzzjoni
Grazzi tax-xiriasing the Dwi Dowellin Mini Drone. This manual provides essential information for the safe operation, setup, and maintenance of your drone. Please read it thoroughly before first use to ensure proper functionality and to prevent damage.
Image: The Dwi Dowellin Mini Drone in red, its black remote control, and two rechargeable batteries.
Informazzjoni dwar is-Sigurtà
- Rakkomandazzjoni dwar l-Età: Dan il-prodott huwa rakkomandat għal utenti minn 14-il sena 'l fuq. Is-superviżjoni ta' adult hija rakkomandata għal utenti iżgħar.
- Ambjent tat-Titjira: Fly in open, clear areas, away from people, animals, buildings, and power lines. Avoid flying in windy conditions.
- Sigurtà tal-batterija: Use only the provided charging cable and batteries. Do not overcharge or short-circuit batteries. Discontinue use if batteries show signs of damage or swelling.
- Sigurtà tal-Iskrun: Keep fingers, hair, and loose clothing away from rotating propellers. The drone features a crash-proof design for added protection.
- Espożizzjoni għall-Ilma: Do not expose the drone or remote control to water or moisture.
- Linja Viżwali tal-Vista: Dejjem żomm linja viżwali mad-drone waqt it-titjira.
Image: The Dwi Dowellin Mini Drone showcasing its full protective design, indicating enhanced safety against impacts.
X'hemm fil-Kaxxa
Ivverifika li l-komponenti kollha huma preżenti qabel tibda s-setup:
- Dwi Dowellin Mini Drone (Red)
- Kontroll mill-bogħod
- Cable tal-Iċċarġjar tal-USB
- Skrejjen żejda
- 2 x Drone Batteries (Lithium Polymer, 450 mAh)
- Tornavit
- Manwal għall-Utent (dan id-dokument)
Setup
1. Iċċarġjar tal-Batterija tad-Drone
Connect the drone battery to the USB charging cable. Plug the USB cable into a USB power source (e.g., computer USB port, USB wall adapter). The indicator light on the USB cable will show charging status. A full charge typically takes 20-40 minutes. Do not leave batteries charging unattended.
2. Installazzjoni tal-Batterija tad-Drone
Carefully insert the charged battery into the battery compartment on the underside of the drone. Ensure it is securely connected and the compartment cover is closed.
3. Installazzjoni ta 'batteriji tal-kontroll mill-bogħod
Open the battery compartment on the back of the remote control. Insert 3 x AAA batteries (not included), ensuring correct polarity (+/-). Close the compartment cover.
4. It-tqabbil tad-Drone u l-Bogħod
- Poġġi d-drone fuq wiċċ ċatt u livell.
- Turn on the drone by pressing the power button. The drone's LED lights will flash.
- Ixgħel il-kontroll mill-bogħod.
- Push the left joystick (throttle) all the way up, then all the way down. The drone's LED lights will stop flashing and become solid, indicating successful pairing.
Istruzzjonijiet Operattivi
Kontrolli Bażiċi tat-Titjira
- One Key Take Off: After pairing, press the One Key Take Off button on the remote control. The drone will automatically ascend and hover at a stable altitude.
- Inżul b'Ċavetta Waħda: Press the One Key Landing button. The drone will slowly descend and land automatically.
- Throttle (Joystick tax-Xellug):
- Imbotta 'l fuq: Żid l-altitudni.
- Push down: Decrease altitude.
- Imbotta xellug/lemin: Dawwar id-drone xellug/lemin (tidwira).
- Kontroll Direzzjonali (Joystick tal-Lemin):
- Imbotta 'l fuq: Ittir 'il quddiem.
- Push down: Fly backward.
- Imbotta lejn ix-xellug: Itir lejn ix-xellug (strafe).
- Imbotta l-lemin: Itir lejn il-lemin (strafe).
Image: Illustration of the One Key Take Off and Landing function, showing the drone ascending and descending with a single button press on the remote.
Karatteristiċi Speċjali
- Żamma tal-Altitudni: The drone features an auto-hovering function that allows it to maintain its current height when the throttle stick is released. This provides stable flight, especially useful for beginners.
- 3D Flips & Rolls: To perform a 3D flip, press the 3D Flip button on the remote control, then quickly push the right joystick in the desired flip direction (forward, backward, left, or right).
- Modalità bla ras: Activate Headless Mode by pressing the dedicated button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front. This simplifies control, especially when the drone is far away or its orientation is unclear.
- Aġġustament tal-veloċità: The drone has 3 speed modes (Low, Mid, High). Press the Speed Adjustment button to cycle through the speeds. Adjust the speed according to your skill level and flying environment.
- Dwal LED: The drone is equipped with bright LED lights, enhancing visibility and providing an impressive visual effect, especially in low-light conditions.
Image: The drone hovering stably in mid-air, illustrating the Altitude Hold feature.
Image: The drone shown in various orientations, demonstrating its ability to perform 3D flips and rolls.
Image: A visual representation of the drone's three speed settings: Low (30%), Mid (60%), and High (100%).
Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf id-drone u l-kontroll remot. Tużax kimiċi jew solventi ħarxa.
- Sostituzzjoni tal-iskrun: If a propeller is damaged, use the provided screwdriver to remove the screw holding it in place. Replace with a new propeller, ensuring it matches the original (A or B). Secure with the screw.
- Kura tal-batterija: Store batteries in a cool, dry place. If not used for an extended period, charge them periodically to maintain battery health. Do not store fully charged or fully discharged for long periods.
- Ħażna: When not in use, store the drone and remote control in a safe place to prevent damage.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-drone ma jirrispondix għall-kontroll mill-bogħod. | Not paired; low battery (drone or remote); interference. | Re-pair drone and remote. Charge drone battery. Replace remote batteries. Move to an area with less interference. |
| Id-drone jtir b'mod erratiku jew jitbiegħed mid-drift. | Not calibrated; damaged propeller; uneven surface at takeoff. | Place drone on a flat surface and re-calibrate (refer to remote control instructions for calibration sequence). Check and replace damaged propellers. Ensure drone is on a level surface for takeoff. |
| Ħin qasir tat-titjira. | Il-batterija mhix iċċarġjata għalkollox; batterija qadima. | Ensure battery is fully charged before flight. Consider replacing old batteries if performance degrades significantly. |
| L-iskrejjen ma jdurux. | Obstruction; motor issue; battery not connected. | Check for any obstructions around propellers. Ensure battery is properly connected and charged. If problem persists, contact support. |
Speċifikazzjonijiet
- Ditta: Dwi Dowellin
- Isem tal-Mudell: D6 AĦMAR
- Kulur: Aħmar
- Dimensjonijiet tal-Prodott: 58.8"L x 58.8"W x 22.8"H (approx. 4.9 inches per side)
- Piż tal-oġġett: 51 Gram (1.8 uqija)
- Materjal: Plastik
- Kapaċità tal-batterija: 450 Milliamp Sigħat (Polimeru tal-Litju)
- Ħin tat-Titjira: Sa 15 minuta (b'2 batteriji)
- Ħin tal-Iċċarġjar: Madwar 20-40 minuti
- Medda massima: 200 Saqajn
- Teknoloġija tal-Konnettività: USB (for charging), Wi-Fi (for remote control)
- Tip ta' Kontroll: Kontroll mill-bogħod
- Livell ta 'Ħiliet: Bidu
- Età Rakkomandata: 14 snin 'il fuq
Garanzija u Appoġġ
This product is sold by Dwi Dowellin and fulfilled by Amazon. For product support or inquiries, please refer to the seller's contact information on the purchase platform.
- Politika ta' Ritorn: This product is eligible for a 30-day refund/replacement return policy. Please refer to your purchase platform for specific details and procedures.
- Pjanijiet ta' Protezzjoni: Extended protection plans may be available for purchase separately. Options include 2-Year and 3-Year protection plans. Please check the product listing for current offerings and terms.
- Manifattur: Dwi Dowellin
- Manufacturer's Store: Visit Dwi Dowellin Store on Amazon
