iFixit iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

iFixit Home Button Replacement Manual

Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020

1. Introduzzjoni

This manual provides detailed instructions for replacing the home button on compatible iPhone models. This replacement part restores all home button functions, excluding Touch ID functionality. Touch ID is uniquely paired to the original logic board and cannot be restored with a replacement home button.

For optimal results, it is recommended to have prior experience with small electronics repair or to seek professional assistance.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety precautions before beginning the repair process.

  • Apparat mitfi: Always ensure your iPhone is completely powered off before starting any repair.
  • Skonnettja l-batterija: Disconnect the battery as early as possible in the repair process to prevent accidental short circuits.
  • Kwittanza Statika: Use an anti-static wrist strap or work on an anti-static mat to prevent electrostatic discharge (ESD), which can damage sensitive electronic components.
  • Immaniġġja b'Kura: Electronic components are fragile. Handle them gently and avoid excessive force.
  • Partijiet Żgħar: Keep track of all screws and small parts. Using a magnetic mat or labeled containers is highly recommended.
  • Protezzjoni tal-għajnejn: Consider wearing eye protection to guard against small flying debris.

3. Prodott Aktarview

The iFixit Home Button replacement part is designed to restore the physical click and home button functionality of your compatible iPhone.

Quddiem view of the iFixit replacement home button

Figura 3.1: Quddiem view of the iFixit replacement home button, showing the black circular button and the flexible circuit board.

Lura view of the iFixit replacement home button

Figura 3.2: Lura view of the iFixit replacement home button, revealing the internal circuitry and connector.

Karatteristiċi ewlenin:

  • Restores home button click functionality.
  • Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020.
  • Does NOT restore Touch ID functionality.

4. Gwida għall-Installazzjoni

This section outlines the general steps for replacing the home button. Specific disassembly steps may vary slightly between iPhone models. Refer to detailed repair guides for your specific iPhone model on the iFixit websit (www.ifixit.com) for comprehensive, step-by-step visual instructions.

Għodod Meħtieġa (Mhux Inklużi):

  • tornavit Pentalobe
  • Tornavit Phillips
  • Tri-point screwdriver
  • Spudger
  • Opening picks
  • Tazza tal-ġbid
  • Pinzetta
  • Heat gun or hairdryer (optional, for adhesive softening)
iFixit repair tools kit with various screwdrivers and opening tools

Figura 4.1: Example of an iFixit repair kit containing various tools necessary for electronics repair.

Passi Ġenerali ta' Installazzjoni:

  1. Ipprepara l-Ispazju tax-Xogħol: Ensure a clean, well-lit, and static-free environment.
  2. Power Off iPhone: Completely shut down your iPhone.
  3. Remove Pentalobe Screws: Remove the two pentalobe screws located at the bottom edge of the iPhone, next to the charging port.
  4. Open Display Assembly: Carefully open the display assembly. This usually involves using a suction cup and opening picks to separate the display from the frame. Be aware of adhesive and delicate cables.
  5. Skonnettja l-batterija: Locate and disconnect the battery connector to prevent power flow during the repair.
  6. Disconnect Display Cables: Disconnect all display and digitizer cables from the logic board.
  7. Remove Display Assembly: Carefully remove the entire display assembly from the iPhone body.
  8. Access Home Button: On the back of the display assembly, locate the home button bracket and screws. Remove them.
  9. Disconnect Home Button Cable: Carefully disconnect the home button flex cable from the display assembly.
  10. Remove Old Home Button: Gently remove the old home button. It may be lightly adhered.
  11. Install New Home Button: Position the new iFixit home button into place. Ensure it sits correctly and the flex cable aligns.
  12. Connect New Home Button Cable: Carefully connect the new home button flex cable.
  13. Erġa' arma: Follow the disassembly steps in reverse order. Reconnect display cables, then the battery. Reattach the display assembly to the iPhone body and secure the pentalobe screws.
  14. Funzjonalità tat-Test: Power on the iPhone and test the home button functionality (single press, double press). Remember, Touch ID will not work.

5. Operating the Replacement Home Button

Once installed, the iFixit replacement home button operates identically to the original in terms of physical presses and gestures, with the exception of Touch ID.

  • Stampa Unika: Returns to the Home screen from any application.
  • Press doppju: Activates the App Switcher, allowing you to view u aqleb bejn applikazzjonijiet miftuħa.
  • Istampa Tripla: Activates Accessibility Shortcuts (if configured in Settings > Accessibility > Accessibility Shortcut).
  • Agħfas u żomm: Jattiva Siri (jekk attivat).

Important Note: Touch ID functionality will be permanently lost with the installation of any non-original home button. This is a security feature implemented by Apple.

6. Manutenzjoni

The iFixit home button replacement part requires minimal maintenance once installed. However, following these general guidelines can help ensure its longevity:

  • Żomm Nadif: Regularly wipe the home button and surrounding area with a soft, dry, lint-free cloth to prevent dust and debris buildup.
  • Evita Likwidi: Do not expose the home button or your device to liquids, as this can cause damage to internal components.
  • Użu Ġentili: Avoid excessive force when pressing the home button.

7 Issolvi l-problemi

If you encounter issues after installing the replacement home button, consider the following troubleshooting steps:

ProblemaKawża PossibbliSoluzzjoni
Home button does not click or respond.
  • Flex cable not properly connected.
  • Home button misaligned.
  • Damaged flex cable during installation.
  • Re-open device and ensure home button flex cable is securely seated.
  • Verify home button alignment within the display assembly.
  • Inspect flex cable for tears or damage. If damaged, replacement may be necessary.
Home button feels loose or wobbly.
  • Home button bracket not securely fastened.
  • Home button not seated correctly.
  • Ensure all screws for the home button bracket are tightened.
  • Re-seat the home button into its recess on the display assembly.
Touch ID is not working.
  • Din hija imġieba mistennija.
  • The replacement home button does not restore Touch ID functionality due to Apple's security protocols.

8. Speċifikazzjonijiet

Isem tal-PartiHome Button Replacement
BrandiFixit
KompatibilitàiPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone SE 2020
KulurIswed
FunzjonalitàRestores home button click and navigation. Does NOT restore Touch ID.
Piż tal-oġġett0.16 uqija
ASINB086V6XCS7
Pajjiż ta' OriġiniIċ-Ċina
Data L-Ewwel Disponibbli17 ta’ Lulju, 2020

9. Garanzija u Appoġġ

iFixit stands behind its products. For specific warranty information and support, please refer to the official iFixit websit.

iFixit offers a "Backed for Life" warranty on their tools and parts. This means if a tool breaks or a part is defective, they will replace it for as long as you own it.

Hands holding an iFixit screwdriver with a 'Quality Parts and Tools - Backed for Life' badge overlay

Figura 9.1: iFixit's "Backed for Life" commitment, emphasizing quality and long-term support.

For further assistance, visit the iFixit support page or community forums:

Dokumenti Relatati - iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

Preview iPhone 6 Logic Board Replacement Guide
A step-by-step guide to replacing the logic board in an Apple iPhone 6, detailing necessary tools, parts, and procedures for disassembly and reassembly.
Preview iPhone X NAND Repair Guide: Fix Recovery Mode & Unlock Data
A detailed guide from iFixit and REWA on how to unlock NAND data and repair an iPhone X stuck in recovery mode by replacing the NAND storage chip. Includes step-by-step instructions, troubleshooting tips, and required tools.
Preview Kif Tirrestawra t-Ton Veru fuq l-iPhone XS Wara s-Sostituzzjoni tal-Iskrin
Gwida komprensiva minn iFixit li tiddeskrivi l-proċess tar-restawr tal-karatteristika tad-displej True Tone fuq iPhone XS wara sostituzzjoni tal-iskrin, bl-użu ta' programmer biex jittrasferixxi d-dejta meħtieġa.
Preview Gwida għas-Sostituzzjoni tal-Karta SIM tal-iPhone 7
Gwida pass pass minn iFixit biex tissostitwixxi jew tneħħi s-SIM card minn Apple iPhone 7, inklużi l-għodda u l-partijiet meħtieġa.
Preview Gwida għas-Sostituzzjoni tal-Batterija tal-MacBook Pro 13" - Tasti tal-Funzjoni tal-Aħħar 2016
Gwida pass pass dwar kif tissostitwixxi l-batterija f'MacBook Pro ta' 13-il pulzier b'Function Keys, manifatturat fl-aħħar tal-2016. Din il-gwida tkopri d-diżattivazzjoni tal-auto-boot, it-tneħħija tal-qiegħ tal-kaxxa, l-iskonnettjar tal-batterija, u s-sostituzzjoni tal-batterija b'istruzzjonijiet dettaljati u prekawzjonijiet ta' sigurtà.
Preview Gwida għas-Sostituzzjoni tal-Qoxra ta' Wara tal-Huawei P9 - iFixit
Istruzzjonijiet pass pass minn iFixit biex tissostitwixxi l-qoxra ta' wara fuq smartphone Huawei P9. Tgħallem kif twettaq it-tiswija b'mod sigur u effettiv.