1. Introduzzjoni
Welcome to the instruction manual for your BWT Aqua Filter AQA Drink Pure Loft system. This innovative 2-way water tap with an L-spout and extendable shower is designed to provide you with filtered, magnesium-mineralized drinking water directly from your tap, alongside regular tap water.
The system integrates seamlessly into most kitchens, connecting directly to your water pipe. Its patented filter technology reduces limescale and improves water taste by filtering out unpleasant components such as chlorine, lead, and copper. The unique magnesium filter enriches your drinking water with valuable magnesium, contributing to overall well-being. By using this system, you also contribute to environmental protection by reducing the need for single-use plastic bottles.

Figura 1.1: Aktarview of the BWT Aqua Filter AQA Drink Pure Loft system, showing the tap, filter cartridge, and AQA monitor.
2. Istruzzjonijiet tas-Sigurtà
Please read all safety instructions carefully before installation and operation to ensure safe and proper use of your BWT Aqua Filter system.
- Kun żgur li l-konnessjonijiet kollha huma siguri u ma jnixxux biex tevita ħsara mill-ilma.
- Only use genuine BWT replacement filters to maintain product performance and warranty.
- Do not expose the filter system or electronic components to freezing temperatures.
- Disconnect the water supply before performing any maintenance or filter changes.
- If the system includes an electrical component (e.g., AQA monitor), ensure it is installed in a dry area and connected to a suitable power source as specified.
- Żomm fejn ma jintlaħaqx mit-tfal.
3. Komponenti Overview
Your BWT Aqua Filter AQA Drink Pure Loft system typically includes the following main components:
- 2-Way Water Tap: L-spout design with an extendable shower function, allowing selection between filtered and unfiltered water.
- Magnesium Filter Cartridge (MP200): The core filtration unit that reduces limescale, chlorine, lead, and copper, while enriching water with magnesium.
- Kap tal-filtru: Connects the filter cartridge to the water supply.
- BWT AQA Monitor: An electronic device that displays filter capacity and water hardness, indicating when a filter change is needed.
- Connection Hoses and Fittings: For connecting the system to your main water supply.

Figure 3.1: The BWT Magnesium Mineralized Water filter cartridge, capable of filtering up to 600 liters of tap water.

Figure 3.2: The BWT AQA Monitor, which tracks filter capacity and water hardness, shown with the flow meter.
4. Setup u Installazzjoni
The BWT Aqua Filter AQA Drink Pure Loft system is designed for under-sink installation and direct connection to your water supply. Professional installation is recommended.
4.1. Kontrolli ta 'qabel l-installazzjoni
- Ensure sufficient space under your sink for the filter system and monitor.
- Verify that your water pressure is within the recommended range (refer to specifications).
- Gather necessary tools: adjustable wrench, screwdriver, drill (if new tap hole is needed).
4.2. Passi ta 'installazzjoni
- Itfi l-Provvista tal-Ilma: Locate and turn off the main water supply to your kitchen sink.
- Remove Existing Tap (if applicable): Disconnect and remove your old kitchen tap.
- Install New Tap: Mount the BWT 2-way water tap into the sink hole. Secure it from underneath with the provided fittings.
- Qabbad Manek tal-Ilma: Connect the hot and cold water hoses from the new tap to your existing hot and cold water supply lines.
- Install Filter Head and Cartridge: Mount the filter head securely under the sink. Insert the magnesium filter cartridge into the filter head. The filter cartridge can be installed either horizontally or vertically.
- Connect Filter System: Connect the dedicated filtered water line from the tap to the filter head. Connect the filter head to the cold water supply line using the provided T-connector.
- Install BWT AQA Monitor: Mount the AQA monitor in an accessible, dry location under the sink. Connect the flow meter (if separate) in-line with the filtered water supply to the monitor. Connect the monitor to a 12V power source if required.
- Iċċekkja għal Tnixxijiet: Slowly turn on the main water supply and check all connections for leaks. Tighten any leaking connections.
- Laħlaħ is-Sistema: Before first use, flush the filtered water line for several minutes (e.g., 5-10 liters) to remove any air and carbon fines from the new filter.

Figure 4.1: Diagram illustrating the direct connection of the BWT filter system to the water line under the sink.

Figura 4.2: Eżample of the BWT filter system integrated neatly within a kitchen cabinet, demonstrating easy integration.
5. Istruzzjonijiet Operattivi
Your BWT Aqua Filter AQA Drink Pure Loft tap features two distinct levers for easy selection of water type.
5.1. Tqassim tal-Ilma
- Unfiltered Tap Water: Use the main lever (typically on the right side) to dispense regular cold or hot tap water. Move the lever forward for cold water and backward for hot water, adjusting flow by moving it up or down.
- Filtered, Mineralized Water: Use the smaller, dedicated lever (typically on the left side) to dispense filtered and magnesium-mineralized drinking water. This water is always cold.

Figura 5.1: Intern view of the tap demonstrating the separate water paths for filtered drinking water and unfiltered tap water.
5.2. AQA Monitor Usage
The BWT AQA Monitor tracks the remaining capacity of your filter cartridge and displays water hardness.
- Wiri: The monitor's display shows the current filter capacity (e.g., percentage or remaining liters) and water hardness settings.
- Buttuna Irrisettja: Press the "RESET" button after replacing the filter cartridge to reset the capacity counter.
- Prog Button: Use the "PROG" button to access settings, such as adjusting the water hardness level if your local water supply changes, which influences the filter's calculated lifespan.
6. Manutenzjoni
Regular maintenance ensures optimal performance and longevity of your BWT Aqua Filter system.
6.1. Sostituzzjoni tal-Kartriġ tal-Filtru
The filter cartridge needs to be replaced when its capacity is depleted, as indicated by the BWT AQA Monitor, or at least every 6-12 months, depending on water quality and usage.
- Itfi l-Provvista tal-Ilma: Close the shut-off valve to the filter system.
- Neħħi l-pressjoni: Open the filtered water tap briefly to release pressure.
- Neħħi l-Kartriġ il-Qadim: Twist the old filter cartridge counter-clockwise to unlock and pull it down from the filter head. Be prepared for a small amount of residual water.
- Daħħal Skartoċċ Ġdid: Remove protective caps from the new BWT Magnesium Mineralized Water filter cartridge. Insert it into the filter head and twist clockwise until it locks into place.
- Ixgħel il-Provvista tal-Ilma: Slowly open the shut-off valve. Check for leaks.
- Laħlaħ il-Filtru l-Ġdid: Flush the new filter by running filtered water for 5-10 minutes (or as recommended by the monitor) to remove air and carbon fines.
- Reset AQA Monitor: Press the "RESET" button on the BWT AQA Monitor to reset the filter capacity counter.
6.2. Cleaning the Tap
Clean the exterior of the tap with a soft cloth and mild soap. Avoid abrasive cleaners or scouring pads, as these can damage the finish.
7 Issolvi l-problemi
This section addresses common issues you might encounter with your BWT Aqua Filter system.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No filtered water flow or very slow flow. |
|
|
| Water taste or odor has not improved. |
|
|
| AQA Monitor not displaying correctly or not working. |
|
|
| Tnixxijiet mill-konnessjonijiet. |
|
|
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | BWT |
| Numru tal-Mudell | 125252398 |
| Product Dimensions (Tap & Filter System) | Approximately 24 x 69 x 2.5 cm (packaging/overall system footprint) |
| Piż tal-oġġett | 6 Kilogrammi (piż totali tal-pakkett) |
| Filter Cartridge Capacity | Up to 600 liters (depending on water hardness and usage) |
| Metodu ta' Purifikazzjoni | Activated Carbon, Ion Exchange (for magnesium mineralization and limescale reduction) |
| Tip ta' Installazzjoni | Taħt Sink |
| Power Source (AQA Monitor) | 12 Volts (for electronic monitor), Tap is Hand-operated |
| Material (Filter Media) | Magnesium (for mineralization) |
| Komponenti Inklużi | Tap, Filter Cartridge, Filter Head, AQA Monitor, Connection Hoses |
9. Informazzjoni dwar Garanzija
For detailed warranty information regarding your BWT Aqua Filter AQA Drink Pure Loft system, please refer to the warranty card included with your product packaging or visit the official BWT websit. It-termini u l-kundizzjonijiet tal-garanzija jistgħu jvarjaw skont ir-reġjun.
10. Appoġġ għall-Klijent
If you have any questions, require technical assistance, or need to order replacement parts, please contact BWT customer support.
- Websit: www.bwt.com (Check for local country-specific websites for contact details)
- Telefon: Refer to the BWT webis-sit jew l-imballaġġ tal-prodott għan-numri ta' kuntatt reġjonali.
- Meta tikkuntattja l-appoġġ, jekk jogħġbok żomm in-numru tal-mudell tal-prodott tiegħek (125252398) u d-data tax-xiri lesti.





