1. Gwida ta' Setup
This section provides instructions for the initial setup of your CAD Audio GXLIEM4 system.
1.1 Żpakkjar u Spezzjoni Inizjali
Carefully unpack all components and verify that all items are present and undamaged. The system includes:
- GXLIEM4 Quad Mix Transmitter Base Station
- 4 GXLIEM Bodypack Receivers
- 4 MEB1 High-Performance Earbuds
- Rack Mount Ears and Hardware
- Antenna Relocation Kit
- Adapter tal-Enerġija
Figura 1.1: Fuqview of the CAD Audio GXLIEM4 Quad Mix System components, including the transmitter, four bodypack receivers, four sets of MEB1 earbuds, antennas, and power supply.
1.2 Installazzjoni tat-Trasmettitur
- Immuntar fuq l-ixtilliera: Attach the included rack mount ears to the sides of the GXLIEM4 transmitter using the provided screws. Secure the transmitter into a standard 19-inch equipment rack.
- Konnessjoni tal-antenna: Connect the two included antennas to the BNC connectors labeled 'ANT A+B' and 'ANT C+D' on the rear panel of the transmitter. For optimal reception, ensure antennas are positioned vertically and unobstructed. An antenna relocation kit is provided for remote antenna placement if needed.
- Input Awdjo: Connect your audio mixer's auxiliary outputs to the corresponding input jacks (Input A, Input B, Input C, Input D) on the rear of the GXLIEM4 transmitter. Each input corresponds to a discrete mix for a bodypack receiver.
- Konnessjoni tal-Enerġija: Connect the power adapter to the 'DC INPUT 13-18V/300mA' jack on the rear panel and plug it into a suitable power outlet.
Figura 1.2: The rear panel of the GXLIEM4 transmitter, illustrating the BNC antenna connectors, four audio input jacks (A, B, C, D), and the DC power input.
1.3 Bodypack Receiver Setup
- Installazzjoni tal-batterija: Open the battery compartment on the back of each bodypack receiver. Insert two AA batteries, observing the correct polarity (+/-). Close the compartment securely. The bodypack receivers are designed for standard AA alkaline batteries.
- Earbud Connection: Plug the MEB1 earbuds into the 3.5mm headphone jack on the top of the bodypack receiver. Ensure a secure connection.
Figura 1.3: A CAD Audio bodypack receiver with its battery compartment open, showing the proper orientation for inserting two AA batteries.
1.4 Sistema Overview Dijagramma
Figura 1.4: A system diagram illustrating how the GXLIEM4 transmitter integrates with a typical audio mixer to provide four discrete monitor mixes to multiple bodypack receivers for performers in various settings like houses of worship or musical bands.
2. Istruzzjonijiet Operattivi
This section details the operational procedures for your GXLIEM4 system.
2.1 Tixgħel/Jitfi
- Trasmettitur: Flip the power switch on the front right panel of the GXLIEM4 transmitter to the 'ON' position. The display for each channel will illuminate.
- Bodypack Receiver: Rotate the volume knob on the top of the bodypack receiver clockwise until the display illuminates. Continue rotating to adjust the volume.
Figura 2.1: A close-up view of a single channel on the GXLIEM4 transmitter's front panel, showing the power switch, channel display, and control buttons.
2.2 Għażla u Sinkronizzazzjoni tal-Frekwenza
The GXLIEM4 system operates in the 900 MHz band, offering frequency agile performance to avoid interference.
- Selecting a Frequency: On the desired transmitter channel, use the 'DOWN' and 'UP' buttons to navigate through available frequencies. Observe the 'AF' (Audio Frequency) and 'RF' (Radio Frequency) indicators. A clear channel will show stable RF.
- IR Synchronization: Once a frequency is selected on the transmitter, align the IR sensor on the bodypack receiver (located near the battery compartment) with the 'IR' window on the corresponding transmitter channel. Press and hold the 'IR' button on the transmitter until the bodypack receiver's display updates with the new frequency. This synchronizes the bodypack to the transmitter channel.
2.3 Adjusting Mixes and Volume
- Transmitter Mix Level: The audio input level for each channel is controlled by your external audio mixer. Ensure appropriate signal levels are sent to the GXLIEM4 inputs.
- Bodypack Receiver Volume: Use the 'VOL' knob on the bodypack receiver to adjust the personal monitoring volume to a comfortable listening level.
2.4 Earbud Usage
Insert the MEB1 earbuds comfortably into your ears. Proper fit is crucial for optimal sound isolation and bass response. Experiment with different ear tip sizes if provided to find the best seal.
3. Manutenzjoni
Regular maintenance ensures the longevity and optimal performance of your GXLIEM4 system.
3.1 Tindif
- Transmitter and Receivers: Wipe surfaces with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Earbuds: Clean ear tips regularly with a damp drapp. Kun żgur li jkunu niexfa għalkollox qabel ma terġa’ twaħħalhom.
3.2 Sostituzzjoni tal-batterija
The bodypack receivers provide over 10 hours of battery life with fresh AA alkaline batteries. Replace batteries when the low battery indicator appears on the bodypack display to prevent unexpected power loss during use.
3.3 Ħażna
When not in use, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from bodypack receivers if storing for extended periods to prevent leakage.
4 Issolvi l-problemi
This section addresses common issues you might encounter with your GXLIEM4 system.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No audio from bodypack receiver | Low/dead batteries; incorrect frequency; disconnected earbuds; transmitter not powered on; no audio input to transmitter. | Replace batteries; resynchronize frequency; check earbud connection; ensure transmitter is powered; verify audio input from mixer. |
| Interferenza jew telf ta' konnessjoni | Conflicting frequencies; excessive distance from transmitter; obstructions; low battery. | Scan for a clear frequency and resync; reduce distance to transmitter; ensure line of sight; replace bodypack batteries. The 900 MHz band is generally less susceptible to TV/FCC interference. |
| Short battery life on bodypack | Old or low-quality batteries; high volume settings. | Use fresh, high-quality alkaline AA batteries. Reduce volume if possible. |
| Bodypack not syncing with transmitter | IR sensors not aligned; IR button not pressed long enough; transmitter channel not active. | Ensure direct line of sight between IR sensors; press and hold IR button until sync is confirmed; verify transmitter channel is powered and active. |
5. Speċifikazzjonijiet Tekniċi
Key technical specifications for the CAD Audio GXLIEM4 system:
- Mudell: GXLIEM4
- Medda ta' Frekwenzi: 902 sa 928 MHz
- Number of Mixes: 4 discrete mixes
- Tip ta' trasmettitur: Rack-mountable, all-metal chassis
- Bodypack Receiver Battery Life: >10 hours (with AA alkaline batteries)
- Earbuds: MEB1 High-Performance Earbuds included
- Teknoloġija tal-Konnettività: Wireless (RF)
- Audio Driver Type (Earbuds): Sewwieq tal-Armatura Ibbilanċjata
- Dimensjonijiet tal-Prodott: 16 x 21 x 3 inches (Transmitter)
- Piż tal-oġġett: 7.25 pounds (Total system)
6. Garanzija u Appoġġ
6.1 Informazzjoni dwar Garanzija
CAD Audio products are designed for reliability and performance. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the official CAD Audio webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għal termini u kundizzjonijiet speċifiċi tal-garanzija, inklużi d-dettalji tat-tul u l-kopertura.
6.2 Appoġġ għall-Klijent
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact CAD Audio customer support. Contact information can typically be found on the official CAD Audio webis-sit jew fl-imballaġġ tal-prodott tiegħek.
