Introduzzjoni
The MaxLite A19 LED light bulbs are designed for efficient and versatile lighting. These 9W LED bulbs provide 800 lumens of soft white light, equivalent to a 60W incandescent bulb. They are suitable for use in enclosed fixtures and damp locations, featuring a standard E26 screw-in base and an impressive life expectancy of 25,000 hours.
Karatteristiċi Ewlenin
- Illuminazzjoni qawwija: Delivers 800 lumens of soft white light (2700K), providing a warm and inviting atmosphere.
- Apparat magħluq Rated: Designed for safe and reliable use in both indoor and outdoor enclosed fixtures, including damp postijiet.
- Iffrankar tal-Enerġija: Consumes only 9 watts of power, offering significant energy savings compared to traditional 60W incandescent bulbs.
- Ħajja twila: Rated for over 25,000 hours of operation, ensuring long-lasting performance and reducing the need for frequent replacements.
- Dimmable: Features a smooth dimming range from 100% down to 10%, allowing you to adjust the light output to your desired ambiance.
Setup u Installazzjoni
Installing your MaxLite A19 LED bulb is a straightforward process. Always ensure the power to the fixture is turned off before installation to prevent electrical shock.
- Itfi: Locate the light switch or circuit breaker controlling the fixture where the bulb will be installed and turn off the power.
- Neħħi l-Bozza l-Qadima (jekk applikabbli): If replacing an existing bulb, allow it to cool completely before carefully unscrewing it counter-clockwise from the socket.
- Daħħal Bozza Ġdida: Gently screw the MaxLite A19 LED bulb clockwise into the E26 medium base socket until it is snug. Do not overtighten.
- Irrestawra l-Enerġija: Turn the power back on at the light switch or circuit breaker.
- Test: Ixgħel is-swiċċ tad-dawl biex tikkonferma li l-bozza qed taħdem sew.
Image: A 4-pack of MaxLite A19 LED bulbs, ready for installation.
Image: A single MaxLite A19 LED bulb highlighting its 9W power consumption, 800 lumens brightness, 25,000-hour lifespan, and 2700K soft white color temperature.
Operazzjoni
The MaxLite A19 LED bulb operates like a standard light bulb. Simply use your existing light switch to turn it on or off.
Funzjonalità tad-Dimming
This LED bulb is fully dimmable, allowing you to adjust the light intensity from 100% down to 10%. For optimal dimming performance, ensure you are using a compatible LED dimmer switch. Incompatible dimmers may cause flickering or reduced performance.
Immaġni: Eżamples of the MaxLite A19 LED bulb illuminating a living room and a bedroom, demonstrating its warm light output.
Manutenzjoni
MaxLite A19 LED bulbs are designed for long-term, maintenance-free operation. However, a few simple practices can ensure their continued performance:
- Tindif: Kun żgur li l-bozza tkun berred u li l-elettriku jkun mitfi qabel ma tnaddafha. Imsaħ il-bozza b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew materjali li joborxu.
- Immaniġġjar: Handle the bulb by its base, not the glass or plastic dome, to avoid transferring oils or damaging the surface.
- Ħażna: Jekk taħżen il-bozoz, żommhom fl-imballaġġ oriġinali tagħhom f'post frisk u niexef.
No user-serviceable parts are inside the bulb. Do not attempt to disassemble or repair the bulb.
Issolvi l-problemi
If you experience issues with your MaxLite A19 LED bulb, please refer to the following common troubleshooting steps:
Il-Bozza Ma Tixgħelx
- Iċċekkja l-Enerġija: Ensure the light switch is in the "ON" position and that the circuit breaker for the fixture has not tripped.
- Konnessjoni Sikura: Turn off the power, then carefully re-screw the bulb into the socket to ensure a proper electrical connection.
- Test in Another Fixture: Try the bulb in a different, known-working fixture to determine if the issue is with the bulb or the original fixture.
Flickering or Inconsistent Light
- Kompatibilità tad-Dimmer: If using a dimmer, ensure it is an LED-compatible dimmer switch. Older incandescent-only dimmers may cause flickering.
- Konnessjoni Laxka: Turn off power and check if the bulb is securely screwed into the socket.
- Tagħbija żejda taċ-ċirkwit: Ensure the circuit is not overloaded with too many devices.
Light is Too Dim or Too Bright
- Aġġustament tad-Dimmer: If using a dimmer, adjust it to your desired brightness level.
- Temperatura tal-Kulur: Note that this bulb provides 2700K Soft White light. If you desire a different light appearance (e.g., brighter white), consider a bulb with a higher Kelvin rating.
Jekk dawn il-passi ma jsolvux il-problema, jekk jogħġbok irreferi għat-taqsima tal-Garanzija u l-Appoġġ għal aktar assistenza.
Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Brand | Maxlite |
| Numru tal-Mudell | MAX98361 |
| Tip Dawl | LED |
| Wattage | 9 watt |
| Wat Ekwivalenti Inkandexxentitage | 60 Watts |
| Luminożità | 800 Lumens |
| Temperatura tal-Kulur | 2700 Kelvin (abjad artab) |
| Daqs tal-Forma tal-Bozza | A19 |
| Bażi tal-Bozza | E26 Bażi Medju |
| Voltage | 120 Volts |
| Ħajja Medja | 25,000 Sigħat |
| Karatteristika Speċjali | Dimmable, Enclosed Fixture Rated, Damp Post Rated |
| Materjal | Plastik |
| Dimensjonijiet tal-Prodott | 2.4"W x 4.2"Għ |
Image: Detailed dimensions of the MaxLite A19 LED bulb, including its E26 medium base.
Garanzija u Appoġġ
The MaxLite A19 LED Bulb comes with a garanzija ta 'sena. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.
For warranty claims, technical assistance, or any product-related inquiries, please contact MaxLite customer support through their official website or the retailer where the product was purchased. Please have your model number (MAX98361) and proof of purchase ready when contacting support.
For more information, visit the official MaxLite websit: www.maxlite.com
