1. Prodott Aktarview
The Reality Leuchten Pollux R67831101 is an LED ceiling light designed for indoor use, featuring an integrated motion sensor and twilight sensor. It provides warm white light and is suitable for various living spaces, including bathrooms due to its IP44 rating.
Stampa 1.1: Quddiem view of the Reality Leuchten Pollux R67831101 LED Ceiling Light. The light features a smooth, white, oval-shaped acrylic shade.
Image 1.2: The Pollux LED Ceiling Light installed on a ceiling, emitting a warm, even glow. The light is flush-mounted and blends seamlessly with the ceiling surface.
Karatteristiċi ewlenin:
- LED integrat: Energy-saving 12 Watt LED, permanently installed.
- Ħajja twila: Average life of 30,000 hours.
- Dawl abjad sħun: 3,000 Kelvin with 1,100 lumens for optimal illumination.
- Sensor tal-Moviment: Permanent motion sensor with adjustable light duration (5 seconds, 1 minute, 3 minutes, or 10 minutes).
- Twilight Sensor: Adjustable twilight sensor with a switching limit of 25 lux, can be manually switched on/off.
- Materjal: Acrylic shade in white.
- Klassifikazzjoni tal-IP: IP44, adattat għal damp ambjenti bħall-kmamar tal-banju.
2. Istruzzjonijiet tas-Sigurtà
Jekk jogħġbok aqra dawn l-istruzzjonijiet tas-sigurtà bir-reqqa qabel l-installazzjoni u t-tħaddim. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korrimenti oħra.
- Sigurtà Elettrika: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the main power supply is switched off before commencing any installation or maintenance work.
- Voltage: This product operates on 230 Volts AC current. Verify your power supply matches this requirement.
- Immuntar: Mount the light securely to a stable ceiling surface.
- Ambjent: Do not expose the light to direct water jets or extreme temperatures beyond its IP44 rating.
- Rimi: Dispose of the product and its components responsibly according to local regulations for electronic waste.
3. Setup u Installazzjoni
Before beginning installation, ensure you have the necessary tools: screwdriver, wire strippers, drill, and appropriate mounting hardware (if not included).
3.1 Disimballaġġ
- Carefully remove the ceiling light from its packaging.
- Check for any visible damage. Do not install if damaged.
- Verify all components are present as listed in the "What's in the Box" section.
3.2 Immuntar tad-Dawl
- Itfi l-Enerġija: Locate the circuit breaker for the installation area and switch off the power supply. Verify with a voltagtester.
- Ipprepara l-Wiċċ tal-Immuntar: Mark the drilling points on the ceiling according to the light's mounting bracket.
- Drill toqob: Drill holes at the marked points and insert appropriate wall plugs if necessary.
- Waħħal il-parentesi tal-immuntar: Waħħal il-parentesi tal-immuntar mas-saqaf billi tuża viti.
- Konnessjonijiet tal-Wajer: Connect the electrical wires from the ceiling to the light fixture's terminals. Ensure correct polarity (Live, Neutral, Earth). Refer to the wiring diagram if provided with the physical product.
- Secure Light Fixture: Attach the light fixture body to the mounting bracket, ensuring it is firmly secured.
- Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' daħħal l-enerġija fis-circuit breaker.
Image 3.1: Technical drawing showing the dimensions of the Pollux R67831101 ceiling light. The diameter is 270mm and the height is 85mm.
4. Istruzzjonijiet Operattivi
The Pollux LED ceiling light is equipped with both a motion sensor and a twilight sensor for automated operation.
4.1 Issettjar tas-Sensor tal-Mozzjoni
The motion sensor is permanently active and cannot be switched off. The light duration after motion detection can be adjusted:
- 5 sekonda
- 1 minuta
- minuti 3
- minuti 10
Refer to the physical product's internal switches or instructions for how to set the desired light duration. This typically involves small DIP switches or a rotary dial located near the wiring terminals.
4.2 Twilight Sensor Settings
The twilight sensor controls when the light activates based on ambient light levels. Its switching limit is 25 lux.
- The twilight sensor can be manually switched on or mitfi.
- Meta on, the light will only activate via the motion sensor if the ambient light level is below 25 lux.
- Meta mitfi, the light will activate via the motion sensor regardless of ambient light levels.
Consult the product's internal settings for adjusting or disabling the twilight sensor. This is usually done via a switch or dial.
Image 4.1: Graphic illustrating the motion sensor (waves and dot) and twilight sensor (moon and sun with lightbulb) functionalities of the light.
5. Manutenzjoni u Kura
Regular cleaning and proper care will ensure the longevity and optimal performance of your LED ceiling light.
- Tindif: Disconnect power before cleaning. Wipe the light with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or acrylic shade.
- Sostituzzjoni LED: The LED module is permanently installed and cannot be replaced by the user. If the LED fails, the entire fixture may need replacement.
- Spezzjoni: Periodically check the light for any loose connections or signs of wear.
6 Issolvi l-problemi
If you encounter issues with your Pollux LED ceiling light, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power supply; loose wiring; faulty LED. | Check circuit breaker. Ensure all wiring connections are secure (consult an electrician if unsure). If LED is faulty, contact customer support. |
| Id-dawl jibqa’ mixgħul il-ħin kollu. | Motion sensor continuously triggered; twilight sensor off in bright conditions. | Ensure no constant motion in sensor's range. Check twilight sensor setting; if it's off, the light will activate regardless of ambient light. |
| Light turns on/off randomly. | Interference with motion sensor; incorrect sensitivity setting. | Check for drafts, pets, or objects that might trigger the sensor. Adjust sensor sensitivity if possible (refer to product-specific instructions). |
| Light duration is too short/long. | Incorrect light duration setting. | Adjust the light duration setting on the fixture (5s, 1min, 3min, 10min). |
If the problem persists after attempting these solutions, please contact RL LIVE YOUR LIGHT customer support.
7. Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Brand | RL LIVE YOUR LIGHT |
| Numru tal-Mudell | R67831101 |
| Dimensjonijiet tal-Prodott | 2.7 x 2.7 x 0.85 cm (Diameter 27cm, Height 8.5cm) |
| Piż tal-oġġett | 530 g |
| Kulur | Abjad |
| Materjal | Plastic (Acrylic Shade) |
| Stil | Moderna |
| Tip ta' Sors tad-Dawl | LED (permanently installed) |
| Wattage | 12 Watts |
| Fluss Luminuż | 1100 Lumens |
| Temperatura tal-Kulur | 3000 Kelvin (abjad sħun) |
| Voltage | 230 Volts |
| Ħajja Medja | 30,000 Sigħat |
| Klassifikazzjoni tal-IP | IP44 |
| Karatteristiċi Speċjali | Motion Sensor, Twilight Sensor |
Image 7.1: Icon indicating the IP44 rating, signifying protection against solid objects larger than 1mm and splashes of water from any direction.
Image 7.2: Diagram illustrating IP classifications for indoor wet areas, showing different zones and their recommended IP ratings. The Pollux light's IP44 rating makes it suitable for Zone 2 (areas where splashing water is possible).
8. Garanzija u Appoġġ
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official RL LIVE YOUR LIGHT websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Riċiklaġġ tal-Bozoz tad-Dawl: View informazzjoni dwar ir-riċiklaġġ għal dan u tipi oħra ta' lamps via Amazon's recycling information page.
Informazzjoni dwar it-Tkissir u t-Tindif ta' Bozoz tad-Dawl: Tgħallem aktar dwar kif tnaddaf u tarmi l-oġġetti miksura jew bil-ħsaraamps via Amazon's clean-up information page.
