1. Introduzzjoni u Informazzjoni dwar is-Sigurtà
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Einhell TC-TS 2225 U Table Saw. Please read all instructions carefully before using the tool. Keep this manual for future reference.
1.1 Twissijiet ta' Sigurtà Ġenerali
- Dejjem ilbes tagħmir protettiv personali (PPE) xieraq, inklużi nuċċalijiet tas-sigurtà, protezzjoni għas-smigħ, u maskra tat-trab.
- Kun żgur li ż-żona tax-xogħol tkun nadifa, imdawwal sew, u ħielsa minn ostakli.
- Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod miż-żona tal-operat.
- Tħaddimx is-serrieq f'damp jew kundizzjonijiet imxarrba.
- Always disconnect the power supply before making adjustments, changing blades, or performing maintenance.
- Use only blades recommended for this saw and suitable for the material being cut.
- Never reach over or around the saw blade while it is running.
- Utilize the push stick for narrow cuts to keep hands away from the blade.
1.2 Prodott Fuqview
The Einhell TC-TS 2225 U Table Saw is a powerful tool designed for precise cutting of various materials. It features a 2,200-watt motor, adjustable cutting height, and extendable work surfaces for handling larger workpieces.
Figura 1: Aktarview of the Einhell TC-TS 2225 U Table Saw with its extendable side tables and sturdy stand.
2. Setup u Assemblea
Careful assembly and initial setup are crucial for safe and accurate operation.
2.1 Spakkjar u Spezzjoni
- Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
- Inspect all parts for any damage that may have occurred during transit. Do not operate the saw if any parts are damaged.
- Verify that all listed components are present. The saw is supplied as a bare tool, so ensure you have the necessary accessories.
2.2 Assemblaġġ tal-Istand
The stable lower frame is designed to provide a comfortable working height of 870 mm. Assemble the stand according to the diagrams provided in the separate assembly guide. Ensure all fasteners are securely tightened.
2.3 Attaching Extendable Side Tables
The saw includes extendable side tables and a rear extension to increase the support surface for wide and long workpieces. Attach these extensions as per the assembly instructions, ensuring they are level with the main table surface.
Figure 2: The table saw features adjustable blade height and angle, along with extendable side tables for increased workpiece support.
2.4 Tool Storage
The saw's housing includes various brackets for storing included stops, tools, the sliding stick, and the power cord. Utilize these for organized storage.
Figure 3: Integrated storage for tools and accessories located beneath the saw table.
3. Operazzjoni
Follow these guidelines for safe and effective operation of your table saw.
3.1 Konnessjoni tal-Enerġija
Connect the saw to a 240 Volt power supply. The powerful motor includes a built-in soft start feature to protect the motor and electrical fuses during startup.
3.2 Adjusting Blade Height and Angle
The cutting height can be adjusted continuously up to 80 mm. The saw blade can also be tilted for angular cuts. Refer to the adjustment mechanisms on the front and side of the saw to set the desired height and angle.
Figure 4: The saw blade guard and mechanism for adjusting blade tilt and height.
3.3 Using the Parallel Guide Stop
The parallel guide stop features high stability with attachment on both sides, allowing for precise rip cuts. Position the stop to the desired width and secure it firmly.
Figure 5: The parallel guide stop, designed for stable and accurate rip cuts.
3.4 Using the Angle Stop
The transverse stop also functions as an angle stop, adjustable up to +/- 45 degrees, for making precise miter cuts.
3.5 Nagħmlu Qatgħa
- Ensure the workpiece is properly supported and the blade is set to the correct height and angle.
- Turn on the saw. Allow the blade to reach full speed before beginning the cut.
- Feed the workpiece slowly and steadily into the blade, maintaining firm contact with the table and the guide.
- Use a push stick for narrow cuts to keep hands clear of the blade.
Figure 6: A user demonstrating the proper technique for cutting a wooden plank on the Einhell Table Saw.
4. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u t-tħaddim sikur tas-serrieq tal-mejda tiegħek.
4.1 Tindif
- Dejjem skonnettja l-provvista tal-enerġija qabel it-tindif.
- Regularly clean dust and debris from the saw, especially around the blade and motor housing.
- The saw features a connection for chip suction located in the housing and in the protection of the saw blade. Connect a suitable dust extraction system to minimize sawdust accumulation.
Figure 7: The dust extraction port located on the saw's housing for connecting a vacuum system.
4.2 Sostituzzjoni tax-xafra
Refer to the manufacturer's instructions for safe blade replacement. Ensure the new blade is compatible with the saw's specifications and is installed correctly.
4.3 Spezzjoni Ġenerali
Periodically check all screws, nuts, and other fasteners for tightness. Inspect the power cord for any damage.
5 Issolvi l-problemi
Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bis-serrieq tal-mejda tiegħek.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Saw ma jibda | No power supply; Faulty switch; Overload protection activated | Check power connection; Inspect switch; Allow motor to cool down and reset overload if applicable |
| Ix-xafra teħel jew taqta’ bil-mod | Dull blade; Incorrect blade type for material; Improper feed rate; Misaligned fence | Replace blade; Use appropriate blade; Adjust feed rate; Realign fence |
| Vibrazzjoni eċċessiva | Loose blade; Damaged blade; Unstable stand | Tighten blade; Replace damaged blade; Ensure stand is stable and all fasteners are secure |
| Qatgħat mhux preċiżi | Misaligned fence or miter gauge; Blade not perpendicular to table | Calibrate fence and miter gauge; Adjust blade angle |
If you encounter problems not listed here or if solutions do not resolve the issue, contact customer support.
6. Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Einhell |
| Numru tal-Mudell | 4340515 |
| Sors tal-Enerġija | Corded Elettriku |
| Wattage | 2200 watt |
| Voltage | 240 Volts |
| Max. Cutting Height (90°) | 80 mm |
| Max. Cutting Height (45°) | 55 mm |
| Angolu tal-Qtugħ | 0-45 Grad |
| Blade Length (Note: Typically blade diameter for circular saws) | 80 Ċentimetru |
| Numru ta 'Snien | 48 |
| Materjal tax-xafra | Azzar b'Veloċità Għolja |
| Blade Shape (Note: Typically circular for saw blades) | Rettangolari |
| Dimensjonijiet tal-Prodott (L x W x H) | 35.83" x 34.84" x 38.19" |
| Piż tal-oġġett | 50.6 liri |
| Komponenti Inklużi | Għodda Bare |
| Karatteristika Speċjali | Lightweight (as listed) |
| Rakkomandazzjoni tal-wiċċ | Metal (as listed, typically for wood) |
7. Informazzjoni dwar Garanzija
This Einhell product is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the warranty card included with your product or visit the official Einhell websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
8. Appoġġ għall-Klijent
For technical assistance, spare parts, or service inquiries, please contact Einhell customer support. Contact details can typically be found on the Einhell official webis-sit jew fid-dokumentazzjoni pprovduta mal-prodott tiegħek.
Manifattur: Carantee
Numru tal-Parti: 4340515
